IMEX Bullseye 80 Laser Meter User Manual

1. Introduction

Thank you for choosing the IMEX Bullseye 80 Laser Meter. This device is designed for precise and efficient distance measurement up to 80 meters, making it an essential tool for professionals and DIY enthusiasts alike. Please read this manual carefully before using the device to ensure safe and optimal operation.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the device:

• Laser Radiation: This device emits Class 2 laser radiation. Do not stare into the laser beam or direct it at other people or animals.
• Battery Safety: Use only the specified battery type. Do not mix old and new batteries, or different types of batteries. Dispose of batteries according to local regulations.
• Environmental Conditions: Do not expose the device to extreme temperatures, humidity, or direct sunlight. Avoid strong vibrations or impacts.
• Maintenance: Do not attempt to disassemble or modify the device. Refer all servicing to qualified personnel.
• Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

3. Package Contents

The IMEX Bullseye 80 Laser Meter package typically includes:

• IMEX Bullseye 80 Laser Meter
• Batteries (pre-installed or separate)
• User Manual (this document)
• Protective Pouch (may vary by region/retailer)
• Wrist Strap (may vary by region/retailer)

Figure 3.1: IMEX Bullseye 80 Laser Meter shown with its protective pouch and wrist strap, indicating typical accessories.

4. Product Overview

The IMEX Bullseye 80 features a robust design with an intuitive button layout and a clear display for easy readability.

Figure 4.1: Front view of the IMEX Bullseye 80 Laser Meter, highlighting its display screen and the arrangement of control buttons for various functions.

Key Features:

• Maximum measurement range of 80 meters.
• Multiple measurement modes (e.g., single distance, continuous measurement, area, volume).
• Clear digital display with backlight.
• Durable construction with IP54 rating for dust and splash protection.
• Compact and portable design.

5. Setup

5.1. Installing Batteries

1. Locate the battery compartment cover on the rear of the device.
2. Slide or unclip the cover to open it.
3. Insert the required batteries (e.g., AAA) according to the polarity markings (+/-).
4. Close the battery compartment cover securely.

6. Operating Instructions

6.1. Power On/Off

• To power on the device, press the ON/DIST button. The laser will activate.
• To power off the device, press and hold the CLEAR/OFF button for a few seconds. The device will also automatically power off after a period of inactivity to conserve battery life.

6.2. Single Distance Measurement

1. Point the laser beam at the target surface.
2. Press the ON/DIST button once. The measurement will be displayed on the screen.

Figure 6.1: The IMEX Bullseye 80 Laser Meter in use, demonstrating its application for precise distance measurements in an indoor setting.

6.3. Continuous Measurement (Tracking)

• Press and hold the ON/DIST button. The device will continuously measure the distance as you move it.
• Release the button to stop continuous measurement and display the last reading.

6.4. Changing Units

• Press the UNITS button to cycle through available measurement units (e.g., meters, feet, inches).

6.5. Area and Volume Measurement

The device supports calculations for area and volume. Refer to the icons on the buttons for specific functions:

• Press the Area/Volume button (icon with two squares or three squares) to select the desired mode.
• Follow the on-screen prompts to take the necessary length, width, and height measurements. The device will automatically calculate and display the result.

Figure 6.2: The IMEX Bullseye 80 Laser Meter positioned on architectural blueprints, illustrating its utility in professional design, planning, and construction measurement tasks.

7. Maintenance

7.1. Cleaning

• Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.
• Ensure the laser lens and display are clean for accurate readings.

7.2. Storage

• When not in use for extended periods, remove the batteries to prevent leakage.
• Store the device in its protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official IMEX website or contact your authorized IMEX dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Note: Specific warranty terms and conditions may vary by region and retailer.