ProTeam ProGuard 4 Portable 4-Gallon Wet Dry Vacuum Cleaner

Important Safety Information

Please read and understand all safety warnings and instructions before operating this vacuum cleaner. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Always disconnect the power cord from the electrical outlet before performing any maintenance or cleaning.
• Do not use this vacuum cleaner to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not allow children to operate the vacuum cleaner. Keep children and unauthorized persons away from the operating area.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• Always wear appropriate personal protective equipment (PPE) when operating or maintaining the unit.

Product Overview

The ProTeam ProGuard 4 is a portable 4-gallon wet/dry vacuum cleaner designed for efficient cleanup of emergency spills, detail cleaning, and job site maintenance. Its compact and lightweight design, combined with powerful suction, makes it suitable for various applications.

What's in the Box

Image: All components of the ProTeam ProGuard 4 Wet Dry Vacuum, including the main unit, hose, filter, wand, and various tools.

• 1 x 4-Gallon Portable Wet/Dry Vacuum Unit
• 1 x 10-foot Flexible Hose (1-1/2-inch diameter)
• 1 x Qwik-Lock Fine Dust Filter
• 1 x Two-Piece Wand
• 1 x Crevice Tool
• 1 x Claw Nozzle
• 1 x Master Tool Adapter with Carpet, Bristle, and Squeegee Inserts
• 1 x Soft Dusting Brush

Key Features

• Powerful Performance: Features a 1080-watt, 9-amp motor providing 142 CFM airflow and 51-inch static lift for effective wet and dry pickup.
• Portable Design: Weighing only 12 pounds with an ergonomic handle and smooth caster wheels for easy transport and maneuverability.
• Qwik Lock Filtration: Patented Qwik Lock Fine Dust Filter allows for tool-free filter removal and replacement.
• Extended Reach: Equipped with a 20-foot power cord and a 10-foot hose to cover large areas without frequent outlet changes.

Setup

1. Unpack Components: Carefully remove all items from the packaging and verify against the 'What's in the Box' list.
2. Install Filter: For dry vacuuming, ensure the Qwik-Lock Fine Dust Filter is securely installed. For wet vacuuming, the filter should be removed or replaced with a wet filter (if applicable and purchased separately) to prevent damage to the motor. The patented Qwik Lock system allows for easy, tool-free filter changes.
3. Attach Hose: Insert the flexible hose into the suction port on the vacuum unit. Ensure it clicks securely into place.
4. Assemble Wand and Tools: Connect the two-piece wand sections. Attach the desired cleaning tool (e.g., master tool adapter with squeegee for wet pickup, crevice tool for tight spaces) to the end of the wand.
5. Power Connection: Plug the 20-foot power cord into a grounded electrical outlet.

Operating Instructions

General Operation

To start the vacuum, press the power switch located on the top of the unit. To turn off, press the switch again.

Dry Vacuuming

• Ensure the Qwik-Lock Fine Dust Filter is installed.
• Select the appropriate tool for the surface (e.g., brush insert for carpet, bristle insert for hard floors).
• Move the vacuum tool slowly over the area to be cleaned to allow for maximum debris pickup.

Wet Vacuuming

Image: A person demonstrating the wet application of the ProGuard 4, effectively cleaning up a liquid spill on a tiled floor.

• Remove the Qwik-Lock Fine Dust Filter before wet vacuuming to prevent damage. A wet filter (if available) can be used.
• Attach the master tool adapter with the squeegee insert for efficient liquid pickup.
• Move the squeegee tool over the wet surface to collect liquids. The vacuum's mechanical float shut-off will automatically stop suction when the tank is full to prevent overflow and motor damage.
• Empty the tank promptly after wet pickup.

Mobility and Reach

Image: The smooth-gliding caster wheels of the ProGuard 4, highlighting its maneuverability.

The ProGuard 4 features smooth caster wheels and an ergonomic handle, allowing for easy movement around obstacles and between work areas. The 20-foot power cord and 10-foot hose provide ample reach, reducing the need to frequently relocate the unit.

Maintenance

Filter Maintenance

Image: An illustration of the ProTeam ProLevel Filtration System, emphasizing the multi-stage filtration for clean air.

• Qwik-Lock Fine Dust Filter: Regularly check the filter for dirt and debris. For optimal performance, clean or replace the filter as needed. To clean, gently tap off loose debris or rinse with water and allow to air dry completely before reinstallation.
• Wet Filter (if applicable): If using a wet filter, clean it after each wet use by rinsing with water.

Tank Emptying and Cleaning

• After wet vacuuming, always empty the tank. The ProGuard 4 features a convenient tank design for easy disposal of liquids.
• Rinse the tank with clean water to remove any residue.
• Allow the tank to air dry completely before storing or using for dry vacuuming.

Hose and Tool Cleaning

• Inspect the hose and tools for blockages or damage. Clear any obstructions.
• Wipe down the exterior of the vacuum and accessories with a damp cloth.

Troubleshooting

If you encounter issues with your ProTeam ProGuard 4, refer to the following common troubleshooting steps:

• No Power: Check if the power cord is securely plugged into a working outlet. Verify the circuit breaker has not tripped.
• Loss of Suction: Ensure the hose is securely attached to the vacuum unit and the wand/tools. Check for blockages in the hose, wand, or tools. Inspect the filter for excessive dirt or damage; clean or replace if necessary. For wet pickup, ensure the tank is not full (mechanical float shut-off activated).
• Unusual Noise: Turn off the vacuum immediately. Check for any foreign objects in the hose, tank, or motor area. If the noise persists, contact customer support.
• Water Leaking: Ensure all connections are tight. For wet vacuuming, verify the tank is not overfilled.

For issues not resolved by these steps, please contact ProTeam customer support.

Specifications

Official Product Video

Warranty Information

The ProTeam ProGuard 4 Wet Dry Vacuum Cleaner is covered by the following warranty:

• Parts and Labor: 3-year warranty
• Motor: 1-year warranty
• Molded Body Parts: Lifetime warranty

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official ProTeam warranty documentation or contact customer support.

Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official ProTeam website or contact their customer service department.

ProTeam Official Website: ProTeam Store on Amazon