BFT THALIA LIGHT Control Board User Manual

1. Introduction

1.1 Product Overview

The BFT THALIA LIGHT control board is specifically designed for controlling 24V swing gate motors. This advanced control unit offers enhanced features and serves as a direct replacement for the LIBRA C MA BFT 24V control unit, ensuring compatibility and ease of upgrade for existing systems.

1.2 Key Features

• Removable Colored Terminal Blocks: Facilitates easier and more organized wiring connections.
• Simplified Programming with Display: Features an integrated LCD screen for intuitive and straightforward setup and configuration.
• Built-in Two-Channel Receiver: Allows for seamless integration with remote controls and other wireless accessories.
• Anti-Crushing Safety with Torque Control (D-Track System): An intelligent system that constantly monitors and adjusts the gate's torque, ensuring maximum safety by detecting and reversing upon obstruction.
• Slowdown at End of Travel: Provides smooth and controlled gate movement during opening and closing cycles, reducing wear and tear.
• Electronic Self-Learning Management: Automatically learns the gate's opening and closing limits, simplifying installation and optimizing performance.

1.3 Main Functions

• Automatic Re-closing: Configurable function to automatically close the gate after a set period.
• Fast Closing: Allows for quicker closing cycles when desired.
• Partial Opening: Enables pedestrian access by opening the gate only partially.
• Direct Connection for Electric Lock Power Supply: Simplifies wiring for electric gate locks.

2. Safety Information

Before proceeding with installation or operation, carefully read and understand all safety warnings and instructions. Failure to comply may result in serious injury or damage to property.

• Installation and maintenance must be performed by qualified personnel only.
• Disconnect power before performing any work on the control board or gate system.
• Ensure all electrical connections comply with local regulations and standards.
• Keep children and pets away from the gate area during operation.
• Regularly inspect the gate system for signs of wear or damage.

3. Installation

The BFT THALIA LIGHT control board should be installed in a protective enclosure, away from direct weather exposure and potential physical damage. Ensure adequate ventilation for optimal performance.

Image: The BFT THALIA LIGHT control board, showcasing its green circuit board, various electronic components, and clearly labeled, colored terminal blocks for wiring connections. A separate connecting cable is also visible below the board.

3.1 Mounting

1. Select a suitable, secure location for the control board enclosure.
2. Mount the enclosure firmly using appropriate fasteners.
3. Install the control board inside the enclosure, ensuring it is securely fastened and protected.

3.2 Wiring Connections

Refer to the detailed wiring diagram provided in the product packaging for specific connections. The control board features removable colored terminal blocks for ease of wiring.

• Power Supply: Connect the main 230V AC power supply to the designated terminals (typically marked L, N, E).
• Motor Connections: Connect the 24V DC swing gate motors to their respective terminals.
• Safety Devices: Connect photocells, safety edges, and other safety devices to their dedicated inputs.
• Command Devices: Connect push buttons, keypads, and remote control receivers to the command inputs.
• Accessories: Connect any additional accessories such as flashing lights, electric locks, or courtesy lights.

4. Setup

The THALIA LIGHT control board features a simplified programming interface with an LCD display for easy configuration.

4.1 Initial Power-Up and Self-Learning

1. After completing all wiring, apply power to the control board.
2. The LCD display will guide you through the initial setup process.
3. Initiate the self-learning procedure. The gate will perform a full opening and closing cycle to automatically learn its travel limits and optimize motor parameters.
4. Ensure the gate operates freely without obstructions during the self-learning phase.

4.2 Programming Parameters

Access the programming menu via the control board's buttons and LCD display to configure various parameters, including:

• Automatic re-closing time.
• Partial opening width.
• Motor force and speed adjustments.
• Operating logic (e.g., step-by-step, automatic).
• Remote control pairing.

4.3 D-Track System Configuration

The D-Track system is pre-calibrated during self-learning. However, fine-tuning of the anti-crushing sensitivity may be possible through the programming menu if required by specific installation conditions. Refer to the detailed programming manual for advanced adjustments.

5. Operating

Once installed and set up, the BFT THALIA LIGHT control board provides reliable and efficient operation of your swing gate.

• Remote Control: Press the assigned button on your remote control to activate the gate (open/close/stop).
• Push Button: Activate the gate using a wired push button connected to the control board.
• Automatic Re-closing: If enabled, the gate will automatically close after the set time delay once fully opened.
• Partial Opening: If configured, a specific command can trigger a partial opening for pedestrian access.
• Safety Features: The D-Track system and connected safety devices (e.g., photocells) will stop or reverse the gate's movement if an obstruction is detected.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your BFT THALIA LIGHT control board and gate system.

• Annual Inspection: Have a qualified technician inspect the entire gate system, including the control board, motors, and safety devices, at least once a year.
• Cleanliness: Keep the control board enclosure clean and free from dust, insects, and moisture.
• Wiring Check: Periodically check all wiring connections for tightness and signs of corrosion or damage.
• Safety Device Test: Regularly test photocells and other safety devices to ensure they are functioning correctly.

7. Troubleshooting

This section provides solutions to common issues you might encounter with your BFT THALIA LIGHT control board.

If the problem persists after attempting these solutions, please contact qualified technical support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact your authorized BFT dealer. Technical support can be obtained through your local BFT distributor or by visiting the official BFT website for contact details.