Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your Health o meter 880KLS Professional Heavy Duty Digital Floor Scale. Please read this manual thoroughly before using the scale to ensure accurate measurements and safe operation.
The Health o meter 880KLS is a robust digital floor scale designed for professional environments, offering reliable and precise weight measurement capabilities.
Product Overview
Figure 1: Health o meter 880KLS Professional Heavy Duty Digital Floor Scale. This image shows the top view of the scale, featuring a central digital display and two textured footpads for user placement.
The 880KLS scale features a large, easy-to-read digital display and a durable platform designed for frequent use. Its heavy-duty construction ensures stability and longevity.
Setup
- Unpacking: Carefully remove the scale from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
- Placement: Place the scale on a hard, flat, and stable surface. Uneven surfaces can affect accuracy. Avoid carpets or soft flooring.
- Power Source:
- Battery Installation (if applicable): Open the battery compartment (usually on the underside) and insert the required batteries, observing polarity.
- AC Adapter (if applicable): Connect the AC adapter to the scale's power input and then to a suitable electrical outlet.
- Initial Calibration/Zeroing: Turn on the scale. Allow a few seconds for the display to stabilize and show "0.0" or "0.00". If it does not, refer to the troubleshooting section.
Operating Instructions
- Power On: Press the "ON/OFF" button to turn on the scale. Wait for the display to show "0.0" or "0.00".
- Unit Selection: If your scale supports multiple units (e.g., kg, lb), press the "UNIT" button to toggle between desired measurement units.
- Taking a Measurement:
- Step onto the center of the scale platform with both feet. Stand still.
- The display will show your weight. Wait for the reading to stabilize and lock.
- Step off the scale. The reading may hold for a few seconds or return to zero.
- Power Off: The scale may automatically power off after a period of inactivity. Alternatively, press the "ON/OFF" button to manually turn it off.
Maintenance
- Cleaning: Wipe the scale surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the scale in water.
- Storage: Store the scale in a dry, cool place. Avoid extreme temperatures and direct sunlight.
- Battery Replacement: If the display shows a low battery indicator (e.g., "Lo"), replace the batteries immediately. Refer to the Setup section for battery installation.
- Inspection: Periodically check the scale for any loose parts or damage. Do not use if damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scale does not turn on. | Dead batteries or no power. | Replace batteries or ensure AC adapter is properly connected. |
| Inaccurate readings. | Uneven surface, scale not zeroed, or movement during measurement. | Place scale on a flat surface, ensure display shows "0.0" before use, stand still. |
| Display shows "Lo" or "Err". | Low battery or overload. | Replace batteries. If "Err" for overload, ensure weight is within scale's capacity. |
Specifications
- Model Number: 880KLS
- Product Dimensions: 19 x 15 x 2 inches
- Item Weight: 9.85 Pounds
- Maximum Capacity: 200 kg / 440 lb
- Measurement Increments: 0.1 kg / 0.2 lb
- Manufacturer: Sunbeam Products, Inc.
- Date First Available: October 7, 2016
Note: Specifications are subject to change without notice.
Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Health o meter website. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: Sunbeam Products, Inc.
For further assistance, contact Health o meter customer service.
