1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your UGEARS UGM-11 Truck 3D Self-Propelled Wooden Model. Please read all instructions carefully before beginning assembly to ensure a successful and enjoyable experience.
2. Safety Information
This model contains small parts and may have sharp edges. Adult supervision is recommended during assembly, especially for younger users. Keep all components out of reach of small children to prevent choking hazards. Handle parts with care to avoid breakage.
3. Package Contents
Your UGEARS UGM-11 Truck package should contain the following items:
- Plywood Boards (containing 420 components)
- Rubber Bands
- Detailed Instruction Booklet
Please verify all components are present and undamaged before starting assembly. Contact customer support if any parts are missing or broken.
4. Setup and Assembly
Assembly of the UGM-11 Truck typically takes approximately 10-12 hours. Patience and attention to detail are crucial for optimal functionality.
4.1. General Assembly Tips
- Part Removal: Carefully remove parts from the plywood boards. Use a hobby knife or similar tool if necessary to avoid splintering.
- Sanding: Lightly sand any rough edges or connection points, especially for moving parts and gears, to ensure smooth operation. A fine-grit sandpaper or nail file can be effective.
- Lubrication (Waxing): Apply wax generously to all moving parts, gears, and axles. This reduces friction and improves the model's performance. A birthday candle or tea light candle can be used for this purpose.
- Follow Instructions: Adhere strictly to the visual instructions provided in the booklet. Review each step before proceeding.
4.2. Visual Assembly Guide
This image displays the completed UGEARS UGM-11 Truck, showcasing its intricate wooden design and functional components.
A detailed view of the truck from the front and side, highlighting the cabin, engine compartment, and front wheels.
This image shows the truck from the rear and side, emphasizing the cargo bed and rear wheel assembly.
A close-up of the truck's engine, revealing the intricate mechanical details and moving parts.
The truck is shown with its cabin doors open, demonstrating the functional design and interior details.
The rear of the truck is displayed with the tailgate lowered, showcasing the cargo bed's functionality.
4.3. Assembly Video
This video provides a visual guide to the assembly process of the UGM-11 Truck, demonstrating key steps and features.
5. Operating Instructions
The UGM-11 Truck is a self-propelled model powered by a rubber band mechanism. Follow these steps to operate your model:
- Winding the Mechanism: Locate the winding key or mechanism, typically on the side or underside of the truck. Turn it clockwise to wind the rubber band motor. Do not overwind.
- Gear Selection: The truck features a functional R-N-D (Reverse, Neutral, Drive) lever. Select 'D' for forward motion, 'R' for reverse, or 'N' to disengage the drive.
- Steering: The front wheels are steerable. Adjust the steering wheel or front axle mechanism to control the direction of the truck.
- Release: Place the truck on a flat, smooth surface. Release the brake or engage the drive to set the truck in motion.
- Functional Elements: The cabin doors, hood, and tailgate can be opened and closed manually. The engine pistons may also move when the truck is in motion.
6. Maintenance
Proper maintenance ensures the longevity and smooth operation of your UGM-11 Truck.
- Lubrication: Periodically reapply wax to all moving gears, axles, and connection points to maintain smooth movement and prevent wear.
- Cleaning: Use a soft, dry cloth or a small brush to gently remove dust and debris from the model. Avoid using water or chemical cleaners, as these can damage the wood.
- Storage: Store the model in a dry environment away from direct sunlight and extreme temperature changes to prevent warping or damage to the wood.
- Rubber Bands: If the rubber bands lose elasticity over time, they can be replaced with similar-sized bands to restore the self-propelled function.
7. Troubleshooting
If you encounter issues with your UGM-11 Truck, consider the following common solutions:
- Movement is not smooth: Ensure all moving parts and gears are adequately waxed. Check for any misaligned or stuck components and gently adjust them.
- Parts are too tight/loose: If parts are too tight, carefully sand the connection points. If too loose, a small amount of wood glue can be used, but apply sparingly and allow to dry completely.
- Model does not move: Verify the rubber band motor is correctly assembled and wound. Check the gear selection lever (R-N-D) is in the 'D' position and the brake is released.
- Broken parts: In case of broken components, UGEARS customer service is known for providing excellent support for replacement parts. Refer to the 'Warranty and Support' section for contact information.
8. Specifications
| Model Name | UGM-11 Truck |
| Model Number | 70015 |
| Number of Components | 420 |
| Assembly Time | Approx. 10-12 hours |
| Model Size (L x W x H) | 34 x 14 x 13 cm (13.39 x 5.51 x 5.12 inches) |
| Item Weight | 2.42 pounds |
| Maximum Recommended Load | 1270 Grams |
| Power Source | Rubber band motor (self-propelled) |
9. Warranty and Support
UGEARS products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included in your product packaging or visit the official UGEARS website.
If you require assistance with assembly, have questions about your model, or need replacement parts, UGEARS customer service is available to help. Please contact them directly through their official website or the contact information provided in your product box.
