Introduction
This manual provides instructions for the assembly, care, and maintenance of your Modway Laura Vegan Leather Upholstered Full Size Headboard. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Figure 1: Front view of the Modway Laura Full Size Headboard. This image displays the headboard's overall shape, vegan leather upholstery, and nailhead trim along the edges.
Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assembly should be performed by at least two adults to prevent injury.
- Keep small parts away from children during assembly.
- Do not overtighten screws, as this may damage the material or frame.
- Periodically check all connections to ensure they remain tight and secure.
- This headboard is designed for indoor use only.
Package Contents
Verify that all items listed below are included in your package:
- One (1) Laura Full Size Headboard Panel
- Two (2) Adjustable Support Legs
- Hardware Pack (screws, washers, nuts, Allen wrench)
Setup and Assembly
Follow these steps to assemble and attach your headboard to a standard full-size bed frame.
- Attach Support Legs: Carefully lay the headboard panel face down on a clean, soft surface to prevent damage. Align the pre-drilled holes on the adjustable support legs with the corresponding holes on the back of the headboard panel. Secure the legs using the provided bolts and washers. Do not fully tighten yet.
- Adjust Height: The headboard features four height-adjustable mounting positions, ranging from 41 inches to 46 inches. Before attaching to your bed frame, adjust the height of the support legs to your desired level. Ensure both legs are set to the same height.
- Attach to Bed Frame: Position the assembled headboard against your bed frame. Align the pre-drilled holes on the support legs with the mounting brackets on your bed frame. Insert the remaining bolts and washers, then tighten all connections securely. If your bed frame does not have pre-drilled holes, you may need to drill new ones or use universal mounting plates (not included).
Figure 2: Side view of the headboard, illustrating the adjustable support legs and attachment points to a bed frame.
Figure 3: Close-up view of the headboard's vegan leather upholstery and the decorative nailhead trim along its curved edges.
Operating Instructions
Once securely attached, your Modway Laura Headboard serves as a comfortable and stylish backrest for your bed. The sturdy construction allows for leaning and provides support. No further operational adjustments are typically required after initial setup.
Maintenance and Care
To maintain the appearance and longevity of your headboard, follow these care instructions:
- Cleaning: For general cleaning, wipe the vegan leather upholstery with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
- Dusting: Regularly dust the headboard and nailhead trim with a soft, dry cloth.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the upholstery.
- Check Connections: Periodically inspect all bolts and connections to ensure they are tight. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headboard feels wobbly or unstable. | Loose bolts or improper attachment to bed frame. | Ensure all bolts connecting the legs to the headboard and the headboard to the bed frame are securely tightened. Verify that the bed frame is stable. |
| Headboard does not align with bed frame. | Incorrect height adjustment or incompatible bed frame. | Re-adjust the height of the support legs. If the bed frame is not standard, universal mounting plates may be required. |
| Nailhead trim appears loose. | Normal wear or minor manufacturing variation. | Gently press the nailhead back into place. If multiple nailheads are loose or missing, contact customer support. |
Specifications
| Brand: | Modway |
| Model Number: | MOD-5391-WHI |
| Size: | Full |
| Color: | White |
| Material: | Vegan Leather (Vinyl) |
| Product Dimensions: | 57.5"W x 46"H (Adjustable Height) |
| Item Weight: | 26 pounds |
| Mounting Type: | Bed Frame Mount |
| Assembly Required: | Yes |
Warranty Information
This product comes with a one-year warranty against manufacturer defects. For specific details regarding warranty claims or extended warranty options, please refer to the documentation provided with your purchase or contact Modway customer support.
Product Video
Watch the official product video for an overview of the Modway Laura Headboard's features and design.
Video: Modway Laura Vegan Leather Upholstered Headboard overview. This video highlights the headboard's classic nailhead trim, padded vegan leather upholstery, and multiple mounting positions.
Customer Support
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact Modway customer support. Refer to your purchase documentation for contact details or visit the official Modway website.
For more information, visit the Modway Store on Amazon.
