Schulte Alexa Style 2.0 Corner Entry Shower Enclosure

Introduction

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Schulte Alexa Style 2.0 Corner Entry Shower Enclosure. Designed for optimal splash protection and ease of use, this 4-part shower cabin features 5 mm safety glass with a Fixil coating and an aluminum frame. Please read this manual thoroughly before beginning assembly to ensure proper installation and long-term satisfaction.

Figure 1: The Schulte Alexa Style 2.0 Corner Entry Shower Enclosure, showcasing its modern design and clear glass panels.

Setup and Installation

The Schulte Alexa Style 2.0 shower enclosure requires assembly. Detailed and illustrated instructions are included with the product to facilitate the process. It is highly recommended that two people perform the assembly to ensure safety and proper handling of the glass components.

Included Components:

• 1 x Shower Enclosure (glass panels and frame profiles)
• 1 x Printed Assembly Manual
• 1 x Accessory Set (handles, seals, etc.)
• 1 x Mounting Material (drills and screws for concrete and masonry)

Installation Notes:

• This shower enclosure is designed for installation on either a shower tray or directly on tiles.
• The design allows for 18 mm wall compensation per side, which accommodates installation even on slightly uneven walls.
• Ensure all surfaces are clean and level before beginning installation.
• Carefully follow the step-by-step instructions provided in the separate assembly manual for precise alignment and sealing.

Figure 2: Example of the aluminum profile, designed for stability and wall compensation.

Figure 3: The ergonomically designed handles included in the accessory set.

Operation

The Schulte Alexa Style 2.0 features wide-opening sliding doors, providing a maximum entry width for comfortable access to the shower area. The 5 mm thick safety glass (ESG) ensures optimal splash protection during showering.

Door Operation:

• Gently slide the doors along their tracks to open and close.
• Avoid forcing the doors, as this can damage the rollers or tracks.
• Ensure the doors are fully closed before showering to prevent water leakage.

Figure 4: The clear safety glass panel, providing an open and modern aesthetic.

Maintenance

Regular cleaning and maintenance will preserve the appearance and functionality of your shower enclosure. The glass panels are treated with a special Fixil glass seal, which significantly reduces water spotting and makes cleaning easier.

Cleaning Recommendations:

• For daily cleaning, use a soft cloth and mild, non-abrasive cleaning agents.
• Avoid using harsh chemicals, abrasive sponges, or scouring powders, as these can damage the Fixil coating and aluminum profiles.
• After each use, it is recommended to wipe down the glass panels with a squeegee or soft cloth to minimize water residue.
• Periodically check the seals for any signs of wear or damage and replace them if necessary to maintain water tightness.

Figure 5: The Fixil glass seal (left) and a visual representation of how water beads on Fixil-coated glass, preventing stubborn water spots (right).

Figure 6: The "Easy to Clean" feature highlights the low-maintenance nature of the Fixil coating.

Troubleshooting

This section addresses common issues you might encounter with your shower enclosure. For problems not listed here, please consult the manufacturer's support channels.

Specifications

Figure 7: Indication of product origin: Made in Germany.

Warranty and Support

For information regarding the product warranty, please refer to the warranty card included with your purchase or contact your retailer directly. Warranty terms may vary based on region and purchase date.

For technical support, spare parts, or further assistance, please contact Schulte customer service through their official website or the contact information provided in the original packaging. Always provide your model number (EP326006 01 500 or 4061164996833) when seeking support.

Figure 8: An aerial view of the Schulte manufacturing facility, emphasizing the brand's commitment to quality production.

Figure 9: The Schulte brand logo, representing their long-standing experience in quality shower products.