Nuvo TH413

Nuvo Lighting TH413 LED Track Head Instruction Manual

Model: TH413

Introduction

Thank you for purchasing the Nuvo Lighting TH413 LED Track Head. This manual provides essential information for the safe installation, operation, and maintenance of your new track head. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Nuvo Lighting TH413 LED Track Head, white finish, 36-degree beam

Image: The Nuvo Lighting TH413 LED Track Head in white, showcasing its compact design and directional light source.

Important Safety Information

Please observe the following safety precautions before installing or operating the Nuvo Lighting TH413 LED Track Head:

  • WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
  • This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
  • Suitable for dry locations only. Do not install in damp or wet environments.
  • Ensure all connections are secure and correct to prevent fire or electric shock.
  • Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
  • Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Package Contents

Verify that all components are present before beginning installation:

  • Nuvo Lighting TH413 LED Track Head (1)
  • Instruction Manual (1)
  • Note: Track system and additional accessories are sold separately.

Installation Instructions

Follow these steps to properly install your LED track head:

  1. Prepare for Installation:
    • Turn off power at the circuit breaker or fuse box to avoid electrical shock.
    • Ensure the track system is properly installed and secured to the ceiling or wall according to its own instructions.
  2. Insert Track Head:
    • Align the track head's connector with the opening in the track rail.
    • Push the track head firmly into the track rail until it clicks into place. Ensure the polarity tab on the track head aligns with the correct polarity groove in the track.
  3. Secure Track Head:
    • Once inserted, twist the track head's locking mechanism (if present) to secure it firmly to the track. Refer to the specific design of your track head for this step.
  4. Restore Power:
    • Once the track head is securely installed, restore power at the circuit breaker.
Installed Nuvo Lighting track heads on a ceiling track system

Image: Multiple Nuvo Lighting track heads installed on a ceiling track, demonstrating a typical setup.

Operating Instructions

The Nuvo Lighting TH413 LED Track Head is designed for ease of use:

  • Power On/Off: Control the light using the wall switch connected to your track lighting system.
  • Adjusting Direction: The track head can be rotated and tilted to direct light precisely where needed. Gently adjust the head to the desired angle. Avoid excessive force.
  • Repositioning on Track: To move the track head along the track, first unlock the locking mechanism (if applicable), slide it to the new position, and then re-lock it. Always ensure power is off when repositioning to prevent accidental contact with live parts.

Maintenance

The Nuvo Lighting TH413 LED Track Head requires minimal maintenance:

  • Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
  • LED Module: The TH413 uses an integrated LED module. There are no user-serviceable bulbs to replace. If the LED module fails, the entire track head may need replacement.

Troubleshooting

If your Nuvo Lighting TH413 LED Track Head is not functioning correctly, refer to the following common issues and solutions:

ProblemPossible CauseSolution
Light does not turn on.
  • No power to the track.
  • Track head not properly seated in the track.
  • Faulty wall switch.
  • Integrated LED module failure.
  • Check circuit breaker and wall switch.
  • Ensure track head is fully inserted and locked into the track.
  • Test the wall switch with another fixture or consult an electrician.
  • Contact customer support for replacement if under warranty.
Light flickers.
  • Loose connection in the track.
  • Incompatible dimmer switch (if applicable).
  • Turn off power and re-seat the track head.
  • Ensure dimmer switch is compatible with LED lighting.

If these solutions do not resolve the issue, please contact Nuvo Lighting customer support.

Specifications

FeatureDetail
Model NumberTH413
BrandNuvo
Item Weight1 pounds
Product Dimensions5.63 x 2.75 x 2.75 inches
ColorWhite
Style36 Degree Beam
FinishFinished
MaterialMetal, Plastic
Power SourceCorded Electric
Voltage120 Volts
Wattage12 watts
Type of BulbLED Module (Integrated)
Luminous Flux820 Lumen
Mounting TypeProtruding (Track Mount)
Safety RatingcETLus, Dry Location Listed

Warranty Information

The Nuvo Lighting TH413 LED Track Head comes with a 3-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, warranty claims, or general inquiries regarding your Nuvo Lighting TH413 LED Track Head, please visit the official Nuvo Lighting website or contact their customer service department. Refer to the product packaging or the Nuvo Lighting website for the most current contact information.

You can also visit the Nuvo Store on Amazon for more information and products.

© 2024 Nuvo Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.