1. Product Overview
The PAC RPK5-GM4101 is an integrated radio replacement kit designed for Chevrolet Camaro vehicles manufactured between 2010 and 2015. This kit allows for the installation of an aftermarket single or double DIN radio while retaining essential factory features and maintaining the original aesthetic of the vehicle's dashboard.
Key Features:
- Retains factory climate control functions, including temperature display in Fahrenheit and Celsius.
- Maintains steering wheel control functionality for audio and phone calls.
- Preserves OnStar functionality.
- Supports factory amplified sound systems.
- Includes an auxiliary audio and USB retention harness.
- Accommodates both single and double DIN aftermarket radios.
- Provides exterior temperature display.
This kit ensures a seamless integration of your new radio, enhancing your vehicle's audio capabilities without compromising critical factory features.
2. What's in the Box
Upon opening the package, verify that all components are present:
- Radio Replacement Kit (Dash Kit)
- Hardware (Mounting Brackets, Screws)
- Electronic Interface Module (RP5-GM4101)
- Wiring Harnesses (Main, Auxiliary, USB)
- Instruction Manual
Image 1: Contents of the PAC RPK5-GM4101 kit. This image displays the main components included: the silver-colored dash kit with climate control openings, the black electronic interface module (RP5-GM4101), various wiring harnesses for power, speakers, auxiliary input, and USB, and black mounting brackets for the aftermarket radio. A single DIN pocket is also visible.
3. Setup & Installation
Installation of the RPK5-GM4101 kit requires technical knowledge of car audio systems and vehicle wiring. It is recommended that installation be performed by a qualified professional. Always disconnect the vehicle's battery before beginning any electrical work.
3.1. Compatibility
- Vehicle: Chevrolet Camaro (2010-2015 models).
- Factory Radio: Works with vehicles equipped with or without the MyLink factory radio.
- Aftermarket Radio: Compatible with most single DIN and double DIN aftermarket radios. Ensure your chosen radio's physical dimensions fit within the kit's opening.
Note: This kit does not retain factory satellite radio functionality. A PAC-UP interface (sold separately) may be required to configure specific vehicle settings.
3.2. Pre-Installation Steps
- Read the entire instruction manual provided with the kit before starting.
- Gather all necessary tools (e.g., trim panel removal tools, screwdrivers, wire strippers, crimpers, multimeter).
- Disconnect the negative terminal of the vehicle's battery.
- Carefully remove the factory radio and dashboard trim panels. Refer to your vehicle's service manual for specific removal procedures.
3.3. Wiring Connections
Connect the RPK5-GM4101 wiring harness to your aftermarket radio's harness according to the color codes and instructions provided in the detailed wiring diagram included with your kit. Ensure all connections are secure and properly insulated.
- Connect the main power, ground, and speaker wires.
- Connect the auxiliary audio and USB retention harnesses as needed.
- Connect the steering wheel control wires to the aftermarket radio's SWC input, if applicable.
- Integrate the electronic interface module (RP5-GM4101) into the vehicle's wiring as instructed. This module manages climate controls, OnStar, and amplified systems.
3.4. Assembly and Installation
- Mount the aftermarket radio into the provided mounting brackets and then into the RPK5-GM4101 dash kit.
- Carefully route all wiring to avoid pinching or interference.
- Connect all harnesses from the dash kit to the vehicle's factory wiring.
- Before fully reassembling the dashboard, temporarily reconnect the battery and test all functions (radio, climate controls, steering wheel controls, OnStar).
- Once all functions are verified, disconnect the battery again, secure all components, and reassemble the dashboard trim panels.
- Reconnect the battery.
4. Operation
After successful installation, the PAC RPK5-GM4101 kit allows your aftermarket radio to integrate with the vehicle's systems.
4.1. Climate Controls
The original rotary climate control knobs are retained and fully functional. Adjust temperature, fan speed, and air direction as you would with the factory system. The temperature display will be visible on the kit's integrated screen.
4.2. Steering Wheel Controls (SWC)
The kit is designed to retain your vehicle's factory steering wheel controls. These controls will operate your aftermarket radio's functions such as volume up/down, track up/down, and mode selection. Specific button assignments may vary depending on your aftermarket radio and may require programming through the radio's settings menu or the PAC-UP interface.
4.3. OnStar
OnStar functionality is retained. When an OnStar call is initiated or received, the audio will mute the aftermarket radio and route through the vehicle's speakers.
4.4. Auxiliary and USB Ports
The factory auxiliary audio input and USB port are retained and can be used with your aftermarket radio, provided the radio has corresponding inputs.
5. Maintenance
The PAC RPK5-GM4101 kit requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the dash kit and climate control knobs clean using a soft, dry cloth. Avoid abrasive cleaners.
- Periodically check all wiring connections to ensure they remain secure, especially if experiencing intermittent issues.
- Ensure no liquids or debris enter the climate control openings or the radio cavity.
6. Troubleshooting
If you encounter issues after installing the RPK5-GM4101 kit, refer to the following troubleshooting steps:
6.1. No Power to Aftermarket Radio
- Check the vehicle's battery connection.
- Verify all power and ground wires are correctly connected between the kit's harness and the aftermarket radio.
- Inspect vehicle fuses and the fuse on the aftermarket radio's harness.
6.2. Climate Controls Not Functioning
- Ensure the electronic interface module (RP5-GM4101) is properly connected to the vehicle's data bus.
- Verify all ribbon cables and connectors within the dash kit are securely seated.
6.3. Steering Wheel Controls Not Working
- Confirm the steering wheel control wire from the kit is connected to the correct input on your aftermarket radio.
- Access your aftermarket radio's settings menu to program or re-program the steering wheel controls. Refer to your radio's manual.
- If issues persist, a PAC-UP interface may be needed for advanced configuration.
6.4. No Sound or Distorted Audio
- Check all speaker wire connections.
- Ensure the factory amplifier turn-on wire (if applicable) is correctly connected.
- Verify the aftermarket radio's fader and balance settings.
For further assistance, consult the detailed installation manual or contact PAC technical support.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 12.5 x 11.5 x 5 inches |
| Item Weight | 1.5 pounds |
| Model Number | RPK5-GM4101 |
| ASIN | B01M056PCV |
| Compatibility | Chevrolet Camaro (2010-2015) |
| Radio Type Supported | Single DIN, Double DIN |
| Retained Features | Climate Controls, Steering Wheel Controls, OnStar, Amplified Sound Systems, Auxiliary Audio, USB |
| Color | Gray (Dash Kit) |
| Manufacturer | PAC |
8. Warranty and Support
For detailed warranty information, please refer to the documentation included with your PAC RPK5-GM4101 kit or visit the official PAC website. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Technical Support:
If you require technical assistance or have questions regarding installation or operation, please contact PAC customer support. You may also find additional resources, including detailed wiring diagrams and firmware updates, on the manufacturer's website.
Additional user guides and manuals can be found online:
