Introduction
This manual provides instructions for the setup, operation, and maintenance of your Logitech G Saitek PRO Flight Throttle Quadrant. This device is designed to enhance your flight simulation experience on PC platforms.
Package Contents
- Pro Flight Throttle Quadrant
- Desk Clamp
- Additional Lever Heads (for customization)
- Quick Start Guide (QSG)
Setup
1. Mounting the Throttle Quadrant
The throttle quadrant can be securely mounted to your desk using the included desk clamp. It can be positioned either on top or in front of your desk, and on the pilot or co-pilot side, to suit your preferred setup.
Image: The Logitech G Saitek PRO Flight Throttle Quadrant shown mounted to a desk with its clamp, featuring three black levers with colored caps (black, blue, red) and six rocker switches.
To mount:
- Position the throttle quadrant on your desired surface.
- Attach the desk clamp to the underside of the quadrant and tighten it until the unit is stable.
2. Connecting to your PC
The throttle quadrant connects to your computer via a USB 2.0 port.
Image: Rear view of the throttle quadrant, showing the integrated USB cable for PC connection.
- Plug the USB cable from the throttle quadrant into an available USB 2.0 port on your PC.
- Your operating system (Windows 7, 8, 8.1, 10, 11) should automatically detect the device.
3. Software Installation (Optional)
For advanced customization and programming, you may use Logitech's Smart Technology (SST) programming software. While many flight simulators recognize the device as "plug and play," the SST software allows for creating custom profiles and configurations.
- Visit the official Logitech G support website to download the latest drivers and SST software for your operating system.
- Follow the on-screen instructions for installation.
Operation
Controls Overview
The Logitech G Saitek PRO Flight Throttle Quadrant features:
- Three Axis Levers: These levers provide precise control over various in-game functions, such as throttle, flaps, mixture, or prop pitch. Each lever operates as an independent axis (X, Y, Z) for full customization.
- Three Two-Way Rocker Switches: Located below each lever, these switches provide six additional programmable buttons. Each switch has two positions, allowing for distinct functions (e.g., gear up/down, flaps up/down).
Image: A detailed view of the throttle quadrant, highlighting the three levers with numerical markings and the three two-way rocker switches labeled T1-T6.
Customizing Lever Heads
The throttle quadrant includes additional lever heads, allowing you to configure the levers for specific aircraft controls like throttle, flaps, mixture, and prop pitch. These can be easily swapped to match your simulation needs.
Image: The throttle quadrant displayed alongside a set of interchangeable lever heads in various shapes and colors (black, blue, orange), demonstrating customization options.
To change lever heads:
- Gently pull the existing lever head upwards to remove it.
- Align the desired lever head with the lever shaft and push down firmly until it clicks into place.
In-Game Configuration
Most flight simulation software (e.g., X-Plane, Microsoft Flight Simulator) will recognize the throttle quadrant automatically. You can then map the axes and buttons to specific functions within the game's control settings.
- Access the 'Controls' or 'Settings' menu within your flight simulator.
- Locate the Logitech G Saitek PRO Flight Throttle Quadrant in the list of detected devices.
- Assign desired functions to the three axis levers and the six button positions of the rocker switches.
Maintenance
To ensure the longevity and optimal performance of your throttle quadrant, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the surface of the device. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Avoid abrasive cleaners or solvents.
- Storage: When not in use, store the throttle quadrant in a clean, dry environment away from direct sunlight and extreme temperatures.
- Cable Care: Avoid sharp bends or kinks in the USB cable. Do not pull the cable to disconnect the device; always grasp the plug.
Troubleshooting
| Issue | Possible Solution |
|---|---|
| Device not recognized by PC |
|
| Levers or switches not responding in-game |
|
| Inaccurate lever movement |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Logitech G |
| Model Name | Logitech G Saitek PRO Flight Throttle Quadrant |
| Item Model Number | 945-000032 |
| Connectivity Technology | USB |
| Controller Type | Throttle Quadrant |
| Compatible Devices | Windows 11, Windows 10, Windows 8.1, Windows 7 |
| Hardware Platform | PC |
| Item Weight | 1.1 pounds (approx. 0.5 kg) |
| Product Dimensions (LxWxH) | 4.33 x 6.5 x 3.54 inches (approx. 11 x 16.5 x 9 cm) |
| Color | Black (with blue and red lever accents) |
| Manufacturer | Logitech, Inc |
| First Available Date | October 9, 2016 |
Image: A diagram illustrating the approximate dimensions of the throttle quadrant, showing a height of 8.3 inches (21 cm) when mounted.
Warranty Information
Logitech G products typically come with a limited hardware warranty. For specific details regarding the warranty period and terms for your Logitech G Saitek PRO Flight Throttle Quadrant, please refer to the warranty documentation included with your product or visit the official Logitech G support website.
Proof of purchase may be required for warranty claims.
Support
For further assistance, technical support, or to download the latest drivers and software, please visit the official Logitech G support website:
You can also find frequently asked questions (FAQs) and community forums on the support website.
