Introduction
This manual provides instructions for the safe and efficient use of your BESTEK 8-Outlet Power Strip with USB Charging Ports, Model MRJ1870KUGY. Please read this manual thoroughly before use and retain it for future reference. This device is designed to provide multiple AC outlets and USB charging ports while offering surge protection for your electronic devices.
Product Features
- 8 AC Outlets: Provides 8 standard AC outlets with a maximum output of 1875W/15A.
- 4 Smart USB Charging Ports: Features 4 USB ports with a total output of 5V/4.2A/21W. These ports include Smart IQ Identification to automatically detect and adjust current for optimal charging speed for various USB-powered devices.
- Advanced Multi-protection Safety Features: Equipped with a lighted on/off switch and an integrated circuit breaker for overload protection. This safeguards connected devices from voltage fluctuations, surges, and lightning strikes.
- Durable Construction: Constructed with PC+ABS Alloy Plastic shell, featuring 1382℉ flame-retardant material and high-conductivity integrated phosphor copper cords.
- Wide Spacing AC Outlets: Two widely spaced AC outlets are designed to accommodate larger power adapters and bulky plugs without obstructing adjacent outlets.
- Long Power Cord: Includes a 12-foot, 14AWG 3-prong power cord, UL certified, designed to prevent overheating with high-power appliances.
- Mounting Options: Keyhole slots on the back allow for flexible wall or baseboard mounting.
- Certifications: FCC and ETL listed, UL certified 3-prong grounded plug power cord.
Image: The BESTEK power strip featuring 8 AC outlets and 4 USB charging ports, shown connected to a laptop and tablet.
Safety Instructions
To ensure safe operation and prevent damage, please observe the following safety guidelines:
- Do Not Exceed Rated Power: The total power consumption of all connected devices must not exceed 1875W or 15A. Overloading can cause overheating and fire hazards.
- Indoor Use Only: This power strip is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Keep Away from Water: Do not expose the power strip to water or other liquids.
- Proper Grounding: Always plug the power strip into a properly grounded 3-prong wall outlet. Do not remove the grounding prong.
- Avoid Disassembly: Do not attempt to open, modify, or repair the power strip. Refer all servicing to qualified personnel.
- Ventilation: Ensure adequate ventilation around the power strip. Do not cover it with clothing, blankets, or other materials that could impede airflow.
- Children and Pets: Keep the power strip out of reach of children and pets.
Image: Diagram illustrating the advanced safety features of the BESTEK power strip, including flame-retardant material, short-circuit, over-voltage, over-current, and lightning strike protection.
Setup and Installation
- Unpack the Power Strip: Carefully remove the power strip from its packaging. Inspect it for any signs of damage.
- Choose a Location: Place the power strip on a stable, flat surface, or consider wall mounting. Ensure the location is dry and away from heat sources or direct sunlight.
- Connect to Wall Outlet: Plug the power strip's 3-prong cord into a standard, grounded 100-250V AC wall outlet.
- Connect Devices:
- For AC-powered devices, plug them into any of the 8 AC outlets. Utilize the widely spaced outlets for larger adapters.
- For USB-powered devices, plug their USB charging cables into the 4 USB ports. The Smart IQ Identification feature will automatically optimize charging.
- Wall Mounting (Optional):
- Locate the keyhole slots on the back of the power strip.
- Mark the desired mounting position on the wall or baseboard.
- Install two screws (not included) into the wall, ensuring they are spaced correctly to align with the keyhole slots. Leave a small gap between the screw head and the wall.
- Align the keyhole slots with the screw heads and slide the power strip down to secure it.
Image: The BESTEK power strip highlighting its wide-spaced outlets and overall dimensions, demonstrating how larger adapters can fit without blocking other ports.
Image: A detailed view of the BESTEK power strip, showing the USB ports with protective covers, the reset button, and the keyhole slots on the underside for mounting.
Operating Instructions
- Power On/Off: Press the lighted on/off switch to power the unit on or off. The switch will illuminate when the power strip is active.
- Using AC Outlets: Plug your electronic devices directly into the 8 AC outlets. Ensure the total power draw does not exceed the maximum rating.
- Using USB Charging Ports: Connect your USB-powered devices (e.g., smartphones, tablets, e-readers) to the 4 USB charging ports using appropriate USB cables. The Smart IQ Identification feature will automatically detect your device and deliver the optimal charging current up to 2.4A per port, with a total maximum of 4.2A across all four ports.
- Circuit Breaker: In case of an overload, the integrated circuit breaker will trip, cutting power to the outlets. To reset, unplug some devices, then press the reset button located near the on/off switch.
Image: The BESTEK power strip in use, demonstrating multiple devices including a smartphone, laptop, and various adapters connected to its AC and USB ports.
Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or sprays.
- Inspection: Periodically inspect the power cord and the power strip for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use and contact customer support.
- Storage: When not in use for extended periods, store the power strip in a cool, dry place, away from direct sunlight and moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets/USB ports. |
|
|
| USB ports not charging devices. |
|
|
| Power strip feels warm. |
|
|
Specifications
| Model Number | MRJ1870KUGY |
| AC Outlets | 8 |
| USB Charging Ports | 4 (Smart IQ Identification) |
| AC Output Rating | 1875W / 15A |
| USB Output Rating | Total 5V / 4.2A / 21W (Up to 2.4A per port) |
| Surge Protection | 600 Joules |
| Input Voltage | 100-250V |
| Power Cord Length | 12 feet (14AWG) |
| Product Dimensions (L x W x H) | 10 x 3.78 x 1.42 inches |
| Item Weight | 2.23 pounds |
| Certifications | FCC, ETL, UL |
Image: A diagram illustrating the UL certified strong copper wire used in the power strip, showing its thickness and construction for safety and efficiency.
Image: A close-up view of the power strip's underside and plug, showing the silk-screened certifications (ETL, FCC) and product details.
Warranty and Support
BESTEK provides an 18-Month Product Replacement Warranty and a 180-Day Refund Policy for this product. If you encounter any issues or have questions regarding your purchase, please contact BESTEK customer service for technical support and assistance.
For customer service inquiries, please refer to the contact information provided on the product packaging or the official BESTEK website.
