Progress Lighting P2914-09 Alexa Bathroom Vanity Light User Manual

Introduction

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting P2914-09 Alexa Bathroom Vanity Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: Progress Lighting P2914-09 Alexa Bathroom Vanity Light. This image displays the vanity light fixture featuring a brushed nickel finish and a cylindrical frosted glass shade, designed for wall mounting.

The P2914-09 is a single-light vanity fixture designed for bathroom environments, featuring a brushed nickel finish and compatibility with voice control systems like Alexa (when paired with a compatible smart bulb, sold separately). Its dimensions are approximately 9.25 inches in height, 4.5 inches in width, and 6.12 inches in depth.

Important Safety Instructions

WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.

• Read all instructions carefully before installing the fixture.
• All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.
• Ensure the mounting surface can support the weight of the fixture.
• Do not connect this fixture to an ungrounded electrical system.
• Use only the specified bulb type and wattage. Exceeding recommended wattage may cause overheating.
• Avoid touching the bulb directly with bare hands during operation or immediately after turning off, as it may be hot.
• Keep combustible materials away from the light fixture.
• This fixture is suitable for damp locations.

What's Included

Please check that all components are present before beginning installation:

• Vanity Light Fixture (P2914-09)
• Glass Shade
• Mounting Hardware (Crossbar, mounting screws, wire nuts)
• Instruction Manual
• Note: Light bulb(s) are typically sold separately.

Installation Instructions

Tools Required (not included):

• Screwdriver (Phillips and Flathead)
• Wire Strippers
• Pliers
• Electrical Tape
• Safety Glasses

IMPORTANT: Ensure power is OFF at the circuit breaker before proceeding.

1. Prepare for Installation: Turn off the main electrical power at the circuit breaker or fuse box. Remove the old fixture if applicable.
2. Attach Mounting Crossbar: Secure the mounting crossbar to the junction box using the provided mounting screws. Ensure the crossbar is level.
3. Wire Connections:
   • Connect the bare copper ground wire from the fixture to the ground wire from the junction box (usually bare copper or green). Secure with a wire nut.
   • Connect the white wire from the fixture to the white (neutral) wire from the junction box. Secure with a wire nut.
   • Connect the black wire from the fixture to the black (hot) wire from the junction box. Secure with a wire nut.
   • Carefully tuck all wires into the junction box.
4. Mount the Fixture: Align the fixture's backplate with the mounting screws on the crossbar. Secure the fixture to the crossbar using the decorative nuts or screws provided.
5. Install Glass Shade: Carefully attach the glass shade to the fixture according to the specific design. Typically, this involves threading it onto a socket ring or securing it with small screws.
6. Install Bulb: Insert the recommended type and wattage light bulb (e.g., Medium Base E26, max 100W incandescent or equivalent LED) into the socket.
7. Restore Power: Turn the main electrical power back on at the circuit breaker. Test the fixture.

If you are unfamiliar with electrical installations, it is recommended to consult a qualified electrician.

Operating Instructions

Once installed and powered, the Progress Lighting P2914-09 Vanity Light operates like a standard wall-mounted light fixture.

• Basic Operation: Control the light using the wall switch connected to the fixture.
• Dimmable Feature: This fixture is designed to be dimmable. To utilize this feature, you must install a dimmable light bulb (sold separately) and connect the fixture to a compatible dimmer switch (also sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.
• Voice Control (Alexa Compatibility): The fixture itself does not have built-in voice control. To enable voice control via systems like Amazon Alexa, you will need to install a compatible smart light bulb (sold separately) and integrate it with your smart home system. Refer to the smart bulb and smart home system's instructions for setup and voice command usage.

Care and Maintenance

Proper care will ensure the longevity and appearance of your vanity light fixture.

• Cleaning: Always disconnect power to the fixture before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Glass Shade: The glass shade can be removed for cleaning. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
• Bulb Replacement: Ensure the fixture is off and the bulb has cooled before attempting to replace it. Use only the specified bulb type and wattage.
• Inspection: Periodically inspect wiring connections for any signs of wear or damage.

Troubleshooting

If you experience issues with your vanity light, refer to the following common problems and solutions:

Product Specifications

Warranty and Support

Progress Lighting products are manufactured to high standards and are backed by a limited warranty. Specific warranty details may vary by product and region. Please refer to the official Progress Lighting website or contact customer service for the most current warranty information.

For technical assistance, replacement parts, or further inquiries, please contact Progress Lighting Customer Support:

• Website: www.progresslighting.com
• Phone: Refer to the website for regional contact numbers.
• Email: Refer to the website for contact forms or email addresses.

When contacting support, please have your model number (P2914-09) and date of purchase available.