Introduction
Welcome to the world of electronic darts with your new Viper Showdown Electronic Dartboard. This manual provides essential information for setting up, operating, and maintaining your dartboard to ensure years of enjoyment. The Viper Showdown features a regulation size 15.5” target area, automatic scoring, and a wide variety of games for up to 8 players.
Please read this manual thoroughly before initial use.
Package Contents
- Viper Showdown Electronic Dartboard
- Six (6) Soft Tip Darts (starter set)
- Mounting Hardware (screws)
- Throw Line
- Throw Line Measuring Tape
- Replacement Soft Tips
- Game Manual (this document)
Figure 1: Included Accessories. This image displays six soft tip darts (three blue, three red), a small bag of white replacement soft tips, and three silver mounting screws, all essential components for setting up and playing with the dartboard.
Setup
1. Mounting the Dartboard
- Choose a suitable location: Ensure there is enough clear space around the dartboard for safe play, free from obstructions.
- Determine mounting height: The center of the bullseye should be 5 feet 8 inches (1.73 meters) from the floor.
- Securely mount the dartboard using the provided mounting hardware. Use appropriate wall anchors if mounting into drywall.
Figure 2: Mounted Dartboard. The image shows the Viper Showdown Electronic Dartboard securely mounted on a white brick wall, ready for play. Darts are stored in the integrated holders on the sides of the board.
2. Installing Batteries
The Viper Showdown Electronic Dartboard is battery operated for a cord-free experience. It requires three (3) AA batteries (not included).
- Locate the battery compartment on the back or bottom of the dartboard.
- Open the battery compartment cover.
- Insert three AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Figure 3: Battery Compartment. This close-up view shows the open battery compartment of the dartboard, with two AA batteries visible, illustrating where power is supplied.
3. Setting the Throw Line
Use the included throw line and measuring tape to mark the proper throwing distance.
- For soft tip darts, the standard throwing distance is 8 feet (2.44 meters) from the face of the dartboard.
- Use the throw line measuring tape to accurately mark this distance on the floor.
- Apply the throw line to the floor at the marked distance.
Operating Instructions
Powering On/Off
Press the On/Off button located on the control panel to power the dartboard on or off.
Figure 4: Control Panel. This image provides a close-up of the dartboard's control panel, highlighting the clearly labeled buttons for power, navigation, game selection, and player management.
Selecting Games and Options
The dartboard offers 32 pre-programmed games with over 590 scoring options.
- After powering on, the LCD display will show the default game.
- Use the Page Up and Page Down buttons to scroll through the available games.
- Press the Enter button to select a game.
- Follow the on-screen prompts to select game options (e.g., number of players, scoring variations).
Figure 5: LCD Display. A detailed view of the dartboard's LCD screen, showing current scores and game progress, ensuring clear visibility during play.
Playing a Game
- Once a game is selected and options are set, the display will indicate the current player.
- Throw your darts at the board. The automatic scoring system will register hits.
- If a dart does not register, press the Miss button to manually advance to the next throw or player.
- Press the Next Player button to switch turns after all darts have been thrown for the current player.
- The dartboard supports up to 8 players for multiplayer games.
Games
The Viper Showdown Electronic Dartboard includes 32 pre-programmed games. Some popular games include:
- 01 Games (301, 501, 701, 901)
- Cricket (Standard, No Score, Killer)
- Count Up
- Shanghai
- High Score
- Shoot-Out
- And many more variants.
Figure 6: Games List. This image shows a partial list of the 32 games available on the dartboard, printed directly on the board's surface for easy reference during play.
Maintenance
Cleaning
Wipe the dartboard surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the electronic components or the board's finish.
Replacing Soft Tips
The soft tips on your darts may wear down or break over time. Replace them as needed using the included replacement tips or standard 2BA soft tips.
Figure 7: Tip Storage. This image shows the convenient built-in storage compartment on the dartboard, designed to hold extra soft tips, ensuring they are always within reach.
Dart Storage
The dartboard features built-in dart holders on the sides for convenient storage of up to six fully assembled darts when not in use.
Figure 8: Built-in Dart Holders. A close-up view of the dartboard's side, illustrating the integrated holders where darts can be securely stored when not in play.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dartboard does not power on. | Batteries are dead or incorrectly installed. | Check battery polarity. Replace with new AA batteries. |
| Darts do not register on the board. | Worn or broken soft tips. Dart not thrown firmly enough. | Replace soft tips. Ensure darts are thrown with sufficient force to penetrate the segment holes. |
| Incorrect scoring. | Multiple darts hitting the same segment simultaneously. | Ensure only one dart hits a segment at a time for accurate scoring. If issue persists, try resetting the board. |
| Display is dim or flickering. | Low battery power. | Replace batteries. |
Specifications
- Brand: Viper
- Model Name: Showdown
- Model Number: 42-0002
- Material: Plastic
- Color: Black
- Product Dimensions: 19.5"W x 22"H (approx. 49.5 cm W x 55.9 cm H)
- Item Weight: 4 Pounds (approx. 1.81 kg)
- Target Area Size: 15.5 inches (regulation size)
- Number of Games: 32
- Scoring Options: Over 590
- Max Players: 8
- Power Source: 3 x AA Batteries (not included)
- Included Components: Showdown Electronic Dartboard, 6 Soft Tip Darts, Mounting Hardware, Throw Line, Throw Line Measuring Tape, Game Manual.
Figure 9: Product Dimensions. This diagram illustrates the overall dimensions of the dartboard, indicating it is 22 inches tall and 19.5 inches wide, providing a clear understanding of its size.
Figure 10: Tournament Target. A close-up of the dartboard's 15.5-inch tournament-sized target area, emphasizing its regulation dimensions for competitive play.
Figure 11: Durable Segments and Ultra-Thin Spider. This diagram highlights the dartboard's durable, precision-engineered segments and ultra-thin spider, designed to minimize bounce-outs and maximize scoring area.
Figure 12: Large Catch Ring. A close-up view of the dartboard's extended catch ring, which helps to protect the surrounding wall from missed darts.
Warranty and Support
The Viper Showdown Electronic Dartboard comes with a 30-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
For warranty claims, technical support, or replacement parts, please contact GLD Products customer service. Refer to the contact information provided on the product packaging or visit the official Viper website for the most up-to-date support details.
Manufacturer: GLD Products
Model: 42-0002
