Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Spigen A251 000CD20875 Bicycle Phone Mount. Please read this manual thoroughly before use to ensure proper functionality and safety.
Safety Information
- Ensure the mount is securely attached to the bicycle handlebar before placing a device.
- Always verify that your smartphone is firmly secured in the mount before riding.
- Do not operate your smartphone while riding. Pull over to a safe location if you need to interact with your device.
- Avoid over-tightening the clamp, which could damage your handlebar.
- This product is not water-resistant. Avoid exposure to rain or excessive moisture.
Setup and Installation
-
Attach the Mount to the Handlebar: Open the clamp mechanism on the back of the mount. Position the mount on your bicycle handlebar. Tighten the screw until the mount is firmly secured. The clamp is adjustable to fit handlebars with diameters between 0.7 and 1.5 inches.
The handlebar clamp is adjustable to fit handlebars with diameters between 0.7 and 1.5 inches, ensuring versatile usage.
-
Adjust for Device Size: The mount features an adjustable grip. Gently pull the side arms outwards to expand the mount. Place your smartphone into the mount and allow the arms to retract, securing your device. The mount is designed to hold smartphones between 4 to 5.6 inches.
The mount features an adjustable grip to securely hold smartphones ranging from 4 to 5.6 inches.
-
Secure with Flexible Strap: For enhanced security, stretch the flexible silicone strap over the corners of your smartphone. This provides an additional layer of stability, especially on uneven terrain.
The flexible silicone strap provides an additional layer of security, keeping your phone firmly in place even on bumpy rides.
-
Final Check: Ensure both the mount and your smartphone are securely fastened before beginning your ride.
Once installed, the mount provides a stable platform for your smartphone during bicycle rides.
Operating Instructions
-
Placing Your Device: Gently expand the mount's arms, insert your smartphone, and allow the arms to grip the device. Then, stretch the silicone strap over the corners of your phone for maximum security.
For enhanced security, the mount includes a flexible silicone strap and soft silicone padded grips to prevent scratches and ensure a firm hold.
-
Adjusting Viewing Angle: The mount features a 360-degree rotatable joint. Loosen the adjustment knob slightly, rotate your device to the desired horizontal or vertical orientation, and then tighten the knob to lock it in place.
The mount allows for 360-degree rotation, enabling optimal viewing angles for your device.
- Removing Your Device: First, remove the flexible silicone strap from your phone's corners. Then, gently expand the mount's arms and carefully lift your smartphone out.
Maintenance
- Cleaning: Wipe the mount with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and moving parts for tightness and wear. Ensure the silicone strap is free from tears or damage.
- Storage: Store the mount in a cool, dry place away from direct sunlight when not in use.
Troubleshooting
- Mount is loose on handlebar: Ensure the clamp screw is fully tightened. If the handlebar is too thin, consider adding a rubber shim (not included) for a tighter fit.
- Phone is not secure in the mount: Verify that the phone is within the compatible size range (4 to 5.6 inches). Ensure the flexible silicone strap is properly stretched over all four corners of the phone.
- Mount rotates freely: Tighten the adjustment knob located at the back of the mount to lock the viewing angle.
Specifications
| Brand | Spigen |
| Model Name | A251 000CD20875 |
| Part Number | A251 |
| Compatible Devices | Smartphones (Pixel, LG G7, Google Pixel, Moto Z2, OnePlus, Note 9, iPhone, Moto, LG G6, Moto E4) |
| Mounting Type | Bicycle Handlebar Mount |
| Special Features | Adjustable, 360-degree Rotation, Magnetic (for mount base) |
| Material | Silicone Rubber |
| Item Dimensions (LxWxH) | 25.4 x 5.1 x 38.1 cm (Approximate Package Dimensions) |
| Water Resistance Level | Not Water Resistant |
| Compatible Vehicle Type | Bicycle |
Warranty
This product is sold without an explicit warranty. Please refer to the retailer's return policy for any issues upon receipt.
Support
For further assistance or inquiries regarding your Spigen A251 000CD20875 Bicycle Phone Mount, please contact Spigen customer support or visit the official Spigen website.