deleyCON Universal Projector Ceiling Mount MK-W-52 Instruction Manual

1. Introduction

Thank you for choosing the deleyCON Universal Projector Ceiling Mount MK-W-52. This mount is designed to provide a secure and adjustable solution for mounting your projector to the ceiling. It features height adjustment, 360° rotation, and ±15° tilt, accommodating most standard projectors with a hole distance between 210mm and 330mm and supporting a weight of up to 13.5 kg. Please read this manual carefully before installation and use to ensure proper setup and safe operation.

Key Features:

• Universal Compatibility: Fits projectors with mounting hole distances from 210mm to 330mm.
• Adjustable Height: Telescopic pole allows height adjustment from 380mm to 580mm.
• Flexible Positioning: Features 360° rotation and ±15° tilt for optimal viewing angles.
• High Load Capacity: Safely supports projectors up to 13.5 kg (30 lbs).
• Integrated Cable Management: Internal cable routing for a clean and organized setup.
• Durable Construction: Made from robust materials for long-lasting stability.

2. Safety Information

• Ensure the ceiling structure can support the combined weight of the mount and your projector. Consult a professional if unsure.
• Do not exceed the maximum load capacity of 13.5 kg (30 lbs).
• Use appropriate tools and follow all installation steps carefully.
• Keep children and pets away from the installation area.
• Periodically check all screws and connections to ensure they remain secure.
• Do not attempt to modify the mount.

3. Package Contents

Before beginning installation, please verify that all parts are present and undamaged.

Figure 3.1: All included parts for the deleyCON projector ceiling mount.

• 1x Projector Ceiling Mount Assembly
• 1x Ceiling Mounting Plate
• 1x Projector Mounting Plate
• 4x Adjustable Projector Arms
• Mounting Hardware Kit (various screws, washers, anchors for ceiling and projector attachment)
• 1x Hex Key (Allen wrench)
• Illustrated Instruction Manual

Note: The mounting hardware kit includes screws for projector attachment (4x M3x8, 4x M4x10, 4x M5x10, 4x M6x10). Please check your projector's requirements to use the correct screws.

4. Setup and Installation

Follow these steps for secure installation of your projector ceiling mount.

4.1 Tools Required (Not Included):

• Drill
• 10mm Drill Bit (for concrete/brick ceilings)
• Phillips Head Screwdriver
• Pencil
• Measuring Tape
• Stud Finder (for wooden ceilings)

4.2 Attaching the Mount to the Ceiling:

1. Select Mounting Location: Choose a suitable location on the ceiling, ensuring it is structurally sound and free from electrical wires or pipes.
2. Mark Drill Holes: Hold the ceiling mounting plate against the ceiling at the desired position. Use a pencil to mark the four drill holes.
3. Drill Holes: Drill holes at the marked positions. For concrete or brick ceilings, use a 10mm drill bit and insert the provided wall anchors. For wooden ceilings, drill pilot holes and ensure you are drilling into a joist.
4. Secure Ceiling Plate: Attach the ceiling mounting plate to the ceiling using the provided screws and washers. Ensure it is firmly secured.

Figure 4.1: Ceiling mounting plate secured to the ceiling.

4.3 Assembling the Projector Mount:

1. Attach Projector Arms: Secure the four adjustable projector arms to the projector mounting plate using the small screws and washers.
2. Adjust Arm Length: Adjust the length of the arms to match the mounting holes on your projector. The arms are designed to accommodate hole distances between 210mm and 330mm.
3. Attach Projector: Carefully lift your projector and align its mounting holes with the adjusted arms. Use the appropriate screws (M3x8, M4x10, M5x10, or M6x10) from the hardware kit to secure the projector to the arms. Do not overtighten.

Figure 4.2: Projector mounting plate with adjustable arms and weight capacity.

Figure 4.3: Projector attached to the mount.

4.4 Connecting the Mount to the Ceiling Plate:

1. Assemble Pole: Connect the telescopic pole sections if they are not already assembled, ensuring the cable management channel is aligned.
2. Attach Pole to Ceiling Plate: Slide the upper part of the pole assembly into the ceiling mounting plate and secure it with the provided screws and hex key.
3. Attach Projector Assembly to Pole: Connect the projector assembly (with the projector attached) to the lower part of the telescopic pole. Secure it firmly with the designated screws and hex key.
4. Cable Management: Route all necessary cables (power, HDMI, etc.) through the internal cable management channel of the pole for a tidy installation.

5. Operating and Adjustments

The deleyCON projector mount offers various adjustment options to achieve the perfect projection angle.

Figure 5.1: Adjustment ranges of the projector mount.

5.1 Height Adjustment:

The mount allows for height adjustment between 380mm and 580mm. Loosen the locking mechanism on the telescopic pole, adjust to the desired height, and then securely tighten the mechanism to fix the position.

5.2 Tilt Adjustment:

The projector can be tilted up to ±15° (forward/backward). Loosen the tilt adjustment screws, set the desired angle, and then firmly tighten the screws to secure the tilt position.

5.3 Rotation Adjustment:

The projector can be rotated 360° horizontally. Loosen the rotation locking screw, turn the projector to the desired orientation, and then tighten the screw to lock it in place.

6. Maintenance

• Cleaning: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Periodic Inspection: Regularly check all screws and connections to ensure they are tight and secure. Over time, vibrations or adjustments may cause screws to loosen.
• Weight Check: Ensure the projector's weight does not exceed the mount's maximum capacity.

7. Troubleshooting

7.1 Projector Not Stable / Sags:

• Check Weight: Verify that your projector's weight does not exceed the 13.5 kg (30 lbs) limit.
• Tighten Screws: Ensure all screws, especially those connecting the projector to the arms and the pole sections, are securely tightened.
• Ceiling Connection: Confirm the ceiling mounting plate is firmly attached to a structurally sound part of the ceiling.

7.2 Difficulty Adjusting Tilt/Rotation:

• Loosen Locking Screws: Ensure the relevant locking screws for tilt or rotation are sufficiently loosened before attempting to adjust.
• Lubrication: If movement is stiff, a small amount of silicone-based lubricant can be applied to moving parts (avoiding electrical components), but this should rarely be necessary.

7.3 Cables Not Fitting Through Management Channel:

• Cable Diameter: The channel is designed for standard cables. Very thick or multiple bulky cables may not fit. Consider using thinner cables or external cable ties if necessary.
• Routing: Ensure cables are routed smoothly without kinks or sharp bends.

8. Specifications

9. Warranty and Support

deleyCON products are manufactured with quality and reliability in mind. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official deleyCON website for detailed warranty terms and conditions.

Customer Support:

If you encounter any issues during installation or operation, or if you have questions about your deleyCON projector mount, please contact our customer support team:

• Email: info@deleycon.de
• Website: Visit the official deleyCON website for FAQs and further assistance.

Please have your model number (MK-W-52) and purchase information ready when contacting support.