1. Introduction
This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Alpine KIT-801T5 8-inch installation kit. This kit is designed to facilitate the integration of an 8-inch Alpine navigation or multimedia system into specific Volkswagen T5 and T6 vehicle models, ensuring a seamless and professional fit.
Please read this manual thoroughly before beginning the installation process to ensure correct setup and to prevent damage to the product or your vehicle.
2. Safety Information
- Always disconnect the vehicle's battery before starting any electrical work to prevent short circuits and electrical shock.
- Ensure all connections are secure and properly insulated to avoid electrical hazards.
- Do not modify the kit components. Unauthorized modifications can lead to malfunction, damage, or injury.
- If you are unsure about any part of the installation process, consult a qualified professional installer.
- Route all cables carefully to avoid interference with vehicle controls, pedals, or airbags.
3. Package Contents
Verify that all components listed below are present in your package before beginning installation:
Figure 3.1: Overview of the Alpine KIT-801T5 installation kit components. This image displays the various parts included in the kit, such as the metal mounting brackets, multiple wiring harnesses for power and signal, an antenna adapter, and the main plastic trim frame designed to integrate an 8-inch display into the vehicle's dashboard.
- Main Installation Frame (Plastic Trim)
- Metal Mounting Brackets (Left and Right)
- Vehicle-Specific Wiring Harnesses (Power, Speaker, CAN-Bus)
- Antenna Adapter
- Small Hardware (Screws, clips)
- Instruction Manual (This document)
4. Setup and Installation
This section outlines the general steps for installing the Alpine KIT-801T5. Specific vehicle disassembly instructions are not covered here and should be referenced from your vehicle's service manual or a professional guide.
4.1. Pre-Installation Steps
- Disconnect Battery: Before starting, disconnect the negative terminal of your vehicle's battery.
- Remove Factory Radio/Trim: Carefully remove the existing factory radio and any surrounding trim panels to access the radio cavity.
- Inspect Vehicle Wiring: Familiarize yourself with the vehicle's existing wiring harnesses and antenna connection.
4.2. Assembling the Head Unit with the Kit
- Attach Mounting Brackets: Secure the provided metal mounting brackets to your Alpine 8-inch head unit using the screws supplied with the head unit or the kit. Ensure they are firmly attached and aligned correctly.
- Connect Wiring Harnesses: Connect the vehicle-specific wiring harnesses from the KIT-801T5 to your Alpine head unit. This typically involves connecting the main power/speaker harness, CAN-Bus interface (if applicable), and antenna adapter.
- Integrate Trim Frame: Carefully attach the plastic trim frame to the assembled head unit and brackets. This frame is designed to provide a factory-like finish in your dashboard.
4.3. Installation into Vehicle Dashboard
- Route Cables: Carefully route all necessary cables (power, speaker, antenna, USB, GPS, etc.) from the head unit assembly through the dashboard opening.
- Connect to Vehicle: Connect the KIT-801T5 wiring harnesses to the corresponding vehicle harnesses. Connect the antenna adapter to the vehicle's antenna cable.
- Slide Head Unit into Place: Gently slide the entire head unit and kit assembly into the dashboard opening. Ensure no wires are pinched. Secure the unit using the vehicle's mounting points or the kit's securing mechanisms.
- Reassemble Trim: Reinstall any removed trim panels, ensuring they snap securely into place and do not obstruct the head unit or its controls.
- Reconnect Battery: Reconnect the negative terminal of your vehicle's battery.
4.4. Examples of Installed Systems
Figure 4.1: Alpine 8-inch system (e.g., X802D-U) installed in a Volkswagen T5 using the KIT-801T5, displaying a navigation map. This image demonstrates the integrated appearance of the head unit within the T5 dashboard.
Figure 4.2: Alpine 8-inch system (e.g., X802D-U) installed in a Volkswagen T5 using the KIT-801T5, displaying a multimedia interface with various app icons. This view highlights the seamless fit and user interface of the installed system.
Figure 4.3: Alpine 8-inch system (e.g., X802D-U) installed in a Volkswagen T6 using the KIT-801T5, displaying a navigation map. This image illustrates the professional integration of the head unit into the T6 dashboard.
Figure 4.4: Another view of the Alpine 8-inch system (e.g., X802D-U) installed in a Volkswagen T6 using the KIT-801T5, showing a navigation map from a slightly different angle. This provides an additional perspective on the fit and finish.
Figure 4.5: Alpine 8-inch system (e.g., X802D-U) installed in a Volkswagen T6 using the KIT-801T5, displaying a multimedia interface with various app icons. This image emphasizes the modern interface and seamless integration.
5. Operating Instructions
The Alpine KIT-801T5 is an installation kit and does not have operational controls itself. Its function is to provide the necessary framework and wiring for an Alpine 8-inch head unit to be installed and operate correctly within your vehicle.
For detailed operating instructions of your Alpine 8-inch navigation or multimedia system, please refer to the specific user manual provided with your Alpine head unit (e.g., Alpine X802D-U).
6. Maintenance
The Alpine KIT-801T5 requires minimal maintenance. Once installed, ensure that the trim pieces are securely fastened and free from excessive dust or debris.
- Cleaning: Use a soft, dry cloth to wipe the plastic trim frame. Avoid abrasive cleaners or solvents, which may damage the finish.
- Inspections: Periodically check that the head unit remains securely mounted and that no cables have become loose or damaged.
7. Troubleshooting
Most issues related to the installed system will likely stem from the head unit itself or its connections. This section addresses common issues related to the installation kit.
| Problem | Possible Cause | Solution |
|---|---|---|
| Head unit does not power on after installation. | Incorrect wiring harness connection; Blown fuse; Vehicle battery not reconnected. | Check all wiring harness connections. Verify vehicle fuses and head unit fuse. Ensure vehicle battery is properly reconnected. |
| Head unit does not fit correctly in the dashboard. | Mounting brackets misaligned; Trim panel not seated properly; Incorrect kit for vehicle model. | Recheck mounting bracket alignment on the head unit. Ensure all trim clips are engaged. Confirm KIT-801T5 is compatible with your specific Volkswagen T5/T6 model year. |
| Steering wheel controls not functioning. | CAN-Bus interface not connected or configured correctly. | Ensure the CAN-Bus interface (part of the wiring harness) is correctly connected and configured according to the Alpine head unit's manual. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | KIT-801T5 |
| Compatibility | Volkswagen T5, Volkswagen T6 (specific models/years may apply) |
| Screen Size Support | 8-inch Alpine Navigation/Multimedia Systems |
| Included Components | Installation frame, mounting brackets, vehicle-specific wiring harnesses, antenna adapter |
| Manufacturer Part Number | 02001KIT802T5 (Note: KIT-801T5 is the product model, 02001KIT802T5 is listed as manufacturer model number) |
9. Warranty and Support
For warranty information regarding your Alpine KIT-801T5, please refer to the warranty card included with your purchase or visit the official Alpine website. Warranty terms and conditions may vary by region.
For technical support or assistance with installation, please contact Alpine customer service or your authorized Alpine dealer. Ensure you have your product model number (KIT-801T5) and proof of purchase available when seeking support.
