deleyCON CAT 6a 12-Port Patchpanel Instruction Manual

1. Introduction

The deleyCON CAT 6a 12-Port Patchpanel is a high-quality, fully shielded network distribution panel designed for both private and professional IT environments. It provides a centralized point for connecting and managing network cables, ensuring efficient and reliable data transmission up to 10 Gigabit Ethernet.

2. Product Overview

2.1 Key Features

• 12x RJ45 network connections on the front for connecting end devices.
• LSA+ terminals on the rear for easy network cable installation.
• Fully shielded metal housing for enhanced signal integrity and protection.
• Supports wall mounting for flexible installation.
• Pre-assembled ground cable for safe and secure connection.
• Color coding according to TIA568A and TIA568B standards.
• LSA contacts are clearly printed with TIA568B color code.
• Compatible with network cables up to 0.64mm (22-26 AWG) diameter.
• Designed for 10 Gigabit Ethernet (CAT 6a specification).
• Compact 1U height unit design.

2.2 Package Contents

Please check the package for the following items:

• 1x deleyCON CAT 6a 12-Port Patchpanel
• 1x Illustrated Instruction Manual (this document)
• 12x Cable Ties
• Mounting Material (2 screws + plugs for wall mounting)

3. Setup

3.1 Mounting the Patchpanel

The deleyCON CAT 6a 12-Port Patchpanel can be easily mounted on a wall or placed on a desktop. For wall mounting, use the provided screws and plugs.

1. Choose a suitable location for the patch panel, ensuring easy access to network cables and power if needed.
2. Mark the positions for the mounting holes on the wall using the patch panel as a template.
3. Drill holes at the marked positions and insert the wall plugs.
4. Secure the patch panel to the wall using the provided screws.

3.2 Wiring the LSA+ Connections

The rear of the patch panel features LSA+ terminals for connecting your network installation cables. It is crucial to use an LSA punch-down tool for proper and secure connections. The terminals are color-coded according to TIA568A and TIA568B standards.

1. Strip approximately 2-3 cm (0.8-1.2 inches) of the outer jacket from your network cable.
2. Untwist the wire pairs and arrange them according to either the TIA568A or TIA568B color code printed on the LSA+ terminals. Ensure consistency across all connections.
3. Place each individual wire into its corresponding LSA+ terminal slot.
4. Use an LSA punch-down tool to firmly press each wire into the terminal. The tool will also trim any excess wire.
5. Once all wires are terminated, use the provided cable ties to secure the cables to the strain relief bar on the patch panel, preventing accidental disconnections.

3.3 Grounding

The patch panel comes with a pre-assembled ground cable. For optimal shielding and safety, connect this ground cable to a suitable grounding point in your network cabinet or building infrastructure. This ensures proper electrical grounding and helps prevent interference.

4. Operating Instructions

Once the patch panel is mounted and wired, you can connect your network devices.

1. Connect your network devices (e.g., computers, switches, routers) to the RJ45 ports on the front of the patch panel using standard RJ45 patch cables.
2. Ensure that the patch cables are securely clicked into place in the RJ45 ports.
3. The patch panel facilitates a clean and organized network infrastructure, allowing for easy connection and disconnection of devices.

5. Maintenance

The deleyCON CAT 6a 12-Port Patchpanel is designed for durability and requires minimal maintenance.

• Cleaning: Periodically wipe the exterior of the patch panel with a soft, dry cloth to remove dust. Avoid using liquid cleaners directly on the ports.
• Connection Check: Occasionally inspect all RJ45 and LSA+ connections to ensure they remain secure and free from damage.
• Cable Management: Use cable ties to keep connected cables organized and reduce strain on the ports.

6. Troubleshooting

If you encounter issues with your network setup involving the patch panel, consider the following troubleshooting steps:

• No Network Connection / Intermittent Connection:
  • Verify that all LSA+ connections on the rear of the patch panel are correctly terminated and secure. Ensure wires are fully seated and trimmed.
  • Check the RJ45 patch cables connecting devices to the front of the panel. Ensure they are fully inserted and click into place. Test with known good cables.
  • Confirm that the network cables used meet the CAT 6a standard for optimal performance.
  • Inspect the ground cable connection for proper grounding.
• Slow Network Speed (e.g., limited to 100 Mbps instead of 1 Gbps/10 Gbps):
  • This issue is often caused by improper cable termination or faulty network cables. Re-check all LSA+ connections for correct wiring (TIA568A/B) and ensure all eight wires are making proper contact.
  • Ensure that all connected network devices (NICs, switches, routers) support the desired speed (e.g., Gigabit or 10 Gigabit Ethernet).
  • Verify that the network cables used are rated for CAT 6a or higher and are not damaged.
• Loose RJ45 Cables: Ensure that the RJ45 patch cables used have proper locking tabs that engage securely with the patch panel's ports. If cables feel loose, try different patch cables.

7. Specifications

8. Warranty Information

For detailed warranty information regarding your deleyCON CAT 6a 12-Port Patchpanel, please refer to the manufacturer's official website or the warranty documentation provided at the time of purchase. Warranty terms and conditions may vary by region and retailer.

9. Support

Should you require further assistance, technical support, or have questions not covered in this manual, please contact deleyCON customer support. You can typically find contact information on the official deleyCON website or through your retailer.

Online Resources: Visit the official deleyCON website for FAQs, additional product information, and support contact details.