ANLAN D828 Multifunctional Facial Machine

1. Introduction

Thank you for choosing the ANLAN D828 Multifunctional Facial Machine. This device is designed to provide various facial care functions to enhance your skin's appearance. Please read this manual thoroughly before first use to ensure proper operation, safety, and optimal performance of the product. Keep this manual for future reference.

2. Safety Information

• Read all instructions before using the device.
• Do not use this device near water or in excessively humid environments.
• This device is not intended for medical use. Consult a physician before use if you have any skin conditions, allergies, or are pregnant.
• Keep out of reach of children.
• Do not disassemble, repair, or modify the device yourself. Contact customer support for assistance.
• Use only the provided charging cable and adapter.
• Discontinue use immediately if you experience any discomfort or adverse reactions.

3. Product Overview

The ANLAN D828 is an ergonomic, handheld facial care device. It features a main body, a treatment head, control buttons, and a charging port.

Image showing the ANLAN D828 Multifunctional Facial Machine, highlighting its ergonomic design and treatment head.

Familiarize yourself with the device's components before operation:

• Treatment Head: The part that comes into contact with your skin.
• Power/Mode Button: Used to turn the device on/off and switch between different functions.
• Indicator Lights: Display current mode, intensity level, or battery status.
• Charging Port: Located at the bottom or side for connecting the charging cable.

4. Setup

4.1. Charging the Device

1. Before first use, fully charge the device.
2. Connect the charging cable to the device's charging port and plug the other end into a suitable USB power adapter (not included) or a computer's USB port.
3. The indicator light will show the charging status. A full charge typically takes approximately 3 hours.
4. Once fully charged, disconnect the charging cable. The device has a battery capacity of 1000 mAh.

4.2. Preparation for First Use

1. Gently wipe the treatment head with a soft, damp cloth to ensure it is clean.
2. Ensure your skin is clean and free of makeup before using the device.

5. Operating Instructions

The ANLAN D828 offers multiple functions for comprehensive facial care. Refer to the specific mode instructions below for optimal results.

5.1. Power On/Off

• To turn on the device, press and hold the Power/Mode button for a few seconds.
• To turn off the device, press and hold the Power/Mode button again for a few seconds.

5.2. Mode Selection

• Once the device is on, short press the Power/Mode button to cycle through the available functions.
• Indicator lights will typically show which mode is currently active.

5.3. General Usage Guidelines

• Apply a suitable skincare product (e.g., gel, serum, moisturizer) to your skin before using the device, as recommended for the specific mode.
• Gently move the treatment head across your skin in upward and outward motions.
• Avoid prolonged use on a single area.
• Follow the recommended duration for each mode as indicated by the device's timer or your skincare routine.

6. Maintenance

6.1. Cleaning

1. After each use, turn off the device.
2. Wipe the treatment head and the device body with a soft, slightly damp cloth.
3. Do not use abrasive cleaners, alcohol, or harsh chemicals, as these can damage the device.
4. Ensure the device is completely dry before storing it.

6.2. Storage

• Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep the device away from moisture.

7. Troubleshooting

8. Specifications

9. Warranty & Support

For warranty information, technical support, or any questions regarding your ANLAN D828 Multifunctional Facial Machine, please refer to the warranty card included with your purchase or contact ANLAN customer service through the official website or your retailer.