HJC HJ-26

Download PDF
Contents

HJC HJ-26 RPHA 11 Motorcycle Helmet Visor User Manual

Model: HJ-26 | Part Number: 30026005

1. Introduction

This user manual provides essential information for the proper installation, care, and maintenance of your HJC HJ-26 RPHA 11 Motorcycle Helmet Replacement Spare Visor. This dark smoke visor is specifically designed for HJC RPHA 11 and RPHA 70 series helmets, offering enhanced sun protection and a sleek appearance. Please read this manual thoroughly before attempting any installation or maintenance procedures to ensure safe and correct usage.

2. Safety Precautions

  • Always ensure your helmet is securely placed on a stable surface before attempting to remove or install the visor.
  • Use only genuine HJC replacement parts to maintain the helmet's safety standards and warranty.
  • Avoid using abrasive cleaners or materials on the visor, as this can scratch the surface and impair visibility.
  • Dark smoke visors are intended for daytime use only. Do not use this visor at night or in low-light conditions, as it significantly reduces visibility.
  • If the visor is scratched, cracked, or damaged in any way, replace it immediately to ensure clear vision and safety.

3. Installation Guide

Follow these steps to properly install your new HJC HJ-26 visor:

  1. Preparation: Place your HJC RPHA 11 or RPHA 70 helmet on a soft, clean surface to prevent scratches.
  2. Visor Removal (if applicable):
    • Open the existing visor fully.
    • Locate the quick-release mechanisms on both sides of the helmet, near the visor pivots.
    • Press the release button or lever on each side and gently pull the visor away from the helmet. The visor should detach easily.
  3. New Visor Installation:
    • Align the pivot points of the new HJ-26 visor with the corresponding slots on the helmet's base plates.
    • Gently push the visor into place until you hear a click on both sides, indicating it is securely locked.
    • Once installed, slowly open and close the visor a few times to ensure it operates smoothly and is properly seated.
HJC HJ-26 Dark Smoke Visor

Figure 1: The HJC HJ-26 Dark Smoke Visor, ready for installation. This image shows the visor's shape and the pivot mechanisms, which are crucial for proper alignment during installation.

4. Care and Maintenance

Proper care extends the life of your visor and maintains optical clarity:

  • Cleaning:
    • Use a soft, clean microfiber cloth and lukewarm water to clean the visor.
    • For stubborn dirt or insects, place a wet cloth over the affected area for a few minutes to soften the debris before gently wiping it away.
    • Avoid using harsh chemicals, ammonia-based cleaners, or window cleaners, as these can damage the visor's coating.
  • Drying: Air dry the visor or gently pat it dry with a clean, soft cloth. Do not rub vigorously.
  • Storage: When not in use, store your helmet and visor in a protective helmet bag to prevent scratches and dust accumulation.
  • Inspection: Regularly inspect the visor for any signs of damage, such as deep scratches, cracks, or haziness, which can impair vision.

5. Troubleshooting

ProblemPossible CauseSolution
Visor does not close properly.Incorrect installation; debris in pivot mechanism.Re-install the visor ensuring both sides click into place. Clean the pivot mechanism.
Visor is loose or wobbly.Not fully engaged in pivot points.Press firmly on both sides of the visor near the pivots until it clicks securely.
Reduced visibility.Scratches, dirt, or improper cleaning.Clean the visor according to instructions. If scratched, replace the visor. Ensure it's not used in low light.

6. Product Specifications

  • Brand: HJC
  • Visor Model: HJ-26
  • Compatible Helmet Models: HJC RPHA 11, HJC RPHA 70 series helmets
  • Color: Dark Smoke
  • Material: Polycarbonate
  • Manufacturer Part Number: 30026005
  • Item Weight: 3.2 ounces
  • Product Dimensions: 3.94 x 3.94 x 3.94 inches

7. Warranty and Support

HJC visors are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the official HJC website or contact their customer service. Keep your purchase receipt as proof of purchase for any warranty claims.

Return Policy: This product typically has a 30-day return policy from the date of purchase, subject to the seller's terms and conditions.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.