Bushnell 202421

Bushnell Performance Opt 202421 Elite 1-Mile ARC Laser Rangefinder User Manual

Model: 202421 | Brand: Bushnell

Introduction

This manual provides comprehensive instructions for the proper use, setup, operation, and maintenance of your Bushnell Performance Opt 202421 Elite 1-Mile ARC Laser Rangefinder. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

The Bushnell Elite 1-Mile ARC Laser Rangefinder is designed for precision distance measurement, featuring Angle Range Compensation (ARC) technology for accurate readings in varied terrain. It is suitable for hunting, golf, and other outdoor activities requiring precise distance information.

Safety Information

WARNING:

  • Do not look directly into the sun or any bright light source through the rangefinder, as this can cause permanent eye damage.
  • This device emits invisible Class 1 laser radiation. Avoid direct eye exposure to the laser beam.
  • Keep out of reach of children.
  • Do not attempt to disassemble or modify the rangefinder. Unauthorized modifications can void the warranty and pose safety risks.

Package Contents

Verify that all items are present in the package:

  • Bushnell Performance Opt 202421 Elite 1-Mile ARC Laser Rangefinder
  • Carrying Case
  • Neck Strap
  • Cleaning Cloth
  • CR2 Battery
  • Quick Start Guide

Setup

1. Battery Installation

  1. Locate the battery compartment cover on the side or bottom of the rangefinder.
  2. Twist or slide the cover to open it.
  3. Insert one CR2 3-volt lithium battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
  4. Replace the battery compartment cover securely.

2. Attaching the Neck Strap

Thread the neck strap through the designated loops on the rangefinder and secure it to prevent accidental drops.

3. Adjusting the Eyepiece

Rotate the eyepiece diopter until the reticle and display appear sharp and clear to your eye.

Operating Instructions

1. Powering On/Off

Press the POWER/FIRE button once to turn on the unit. The unit will automatically power off after 10 seconds of inactivity to conserve battery life.

2. Measuring Distance

  1. With the unit powered on, aim the reticle at the target.
  2. Press and hold the POWER/FIRE button. The rangefinder will emit a laser pulse and display the distance to the target.
  3. Release the button to complete the measurement.

3. Scan Mode

For continuous measurement of multiple targets or moving targets, press and hold the POWER/FIRE button and slowly pan across the targets. The display will update with continuous distance readings.

4. ARC (Angle Range Compensation) Modes

The Elite 1-Mile ARC features different ARC modes for specific applications. Press the MODE button to cycle through the available modes:

  • Regular Mode: Displays line-of-sight distance.
  • Bow Mode: Provides true horizontal distance from 5-99 yards.
  • Rifle Mode: Displays holdover/bullet drop in inches, MOA, or MIL.

5. Unit of Measure

To switch between Yards (Y) and Meters (M), press and hold the MODE button for approximately 5 seconds while the unit is powered on, until the unit of measure changes.

Maintenance

1. Cleaning the Lenses

Gently wipe the lenses with the included cleaning cloth or a soft, lint-free cloth. Do not use abrasive materials or harsh chemicals. For stubborn dirt, use a lens cleaning fluid specifically designed for optics.

2. Battery Replacement

When the battery indicator appears on the display, replace the CR2 battery as described in the "Battery Installation" section. Always dispose of used batteries responsibly.

3. Storage

Store the rangefinder in its protective carrying case in a cool, dry place when not in use. Avoid exposing the device to extreme temperatures or high humidity for extended periods.

Troubleshooting

ProblemPossible CauseSolution
No display/Unit won't turn onDead or incorrectly installed batteryReplace battery, ensuring correct polarity.
Inaccurate readingsDirty lenses, unstable aiming, target too small/reflectiveClean lenses. Ensure stable aim. Target larger, less reflective objects.
"E" or "Err" displayedMeasurement error, target out of rangeRe-aim at target. Ensure target is within the rangefinder's operational limits.

If problems persist, please contact Bushnell Customer Service for assistance.

Specifications

  • Model: Bushnell Performance Opt 202421 Elite 1-Mile ARC Laser Rangefinder
  • Range: 5-1760 yards (5-1609 meters)
  • Accuracy: +/- 1 yard
  • Magnification: 7x (typical)
  • Objective Lens Diameter: 24mm (typical)
  • Battery Type: 3-volt CR2 Lithium (1)
  • Water Resistance: Rainproof/Waterproof (refer to product packaging for specific rating)
  • Weight: 0.01 ounces

    Note: The provided item weight of 0.01 ounces appears to be a data entry error. Actual weight for a laser rangefinder of this type is typically around 6-8 ounces (170-227 grams).

  • UPC: 792745448390

Warranty and Customer Support

For warranty information, product registration, or technical support, please visit the official Bushnell website or contact their customer service department.

Bushnell Official Website: www.bushnell.com

Contact Information: Refer to the Bushnell website for the most current contact details, including phone numbers and email support.

© 2024 Bushnell. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.