1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Aruba 7010 Controller. The Aruba 7010 is a compact, high-performance network controller designed for enterprise environments, offering robust connectivity and management capabilities for wireless access points and wired clients.
1.1 Product Overview
The Aruba 7010 (US) is a 16-port controller featuring 150W PoE+ capabilities, 10/100/1000BASE-T Ethernet ports, and 1G BASE-X SFP ports. It supports up to 32 access points and 2000 clients, making it suitable for medium to large-scale network deployments.
Figure 1: Front view of the Aruba 7010 Controller, showing the Ethernet ports, SFP ports, USB ports, and status indicators.
1.2 What's in the Box
Upon unpacking, verify that all items are present and undamaged:
- Aruba 7010 Controller (Model: JW679A)
- Power cable
- Rack-mount kit
- Console cable
Figure 2: Top-down view of the Aruba 7010 Controller, highlighting its compact form factor and port layout.
2. Safety Information
WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Always adhere to the following safety guidelines to prevent injury or damage to the device:
- Ensure proper grounding for all electrical connections.
- Do not expose the device to moisture or extreme temperatures.
- Use only the power cable supplied with the device.
- Avoid blocking ventilation openings to prevent overheating.
- Refer to qualified service personnel for all servicing.
3. Setup
3.1 Physical Installation
The Aruba 7010 Controller can be installed on a desktop or mounted in a standard 19-inch equipment rack using the provided rack-mount kit.
- Desktop Installation: Place the controller on a flat, stable surface with adequate ventilation. Ensure no objects obstruct the air vents.
- Rack Installation: Attach the rack-mount brackets to the sides of the controller using the supplied screws. Secure the controller into the rack using appropriate rack screws.
3.2 Connecting the Controller
- Power Connection: Connect the supplied power cable to the power inlet on the rear of the controller and then to a grounded AC power outlet.
- Network Connections:
- Connect your network devices (e.g., access points, computers, servers) to the 10/100/1000BASE-T Ethernet ports. These ports support Power over Ethernet (PoE+) for compatible devices.
- For high-speed uplinks, insert appropriate 1G BASE-X SFP transceivers into the SFP ports and connect fiber optic cables.
- Console Connection: For initial configuration or troubleshooting, connect the supplied console cable from the controller's console port to a serial port on your computer. Use a terminal emulation program (e.g., PuTTY, Tera Term) to access the command-line interface (CLI).
- USB Ports: The controller includes USB ports for potential future use, such as connecting external storage or USB-based management tools.
4. Operating the Controller
Once powered on and connected, the Aruba 7010 Controller will initiate its boot sequence. The front panel LEDs will indicate the system status. Initial configuration is typically performed via the console port or a web-based management interface accessible through a connected network port.
4.1 Initial Configuration
Refer to the ArubaOS documentation for detailed instructions on initial setup, including IP address assignment, network settings, and access point provisioning. This controller is designed to manage Aruba access points and provide centralized control over your wireless network.
4.2 Network Management
The controller provides advanced features for network management, including:
- Centralized management of access points and wireless clients.
- Policy enforcement and security features.
- Guest access management.
- Network monitoring and reporting.
For comprehensive operational details, consult the official ArubaOS User Guide and Command Line Interface Reference Guide available from the manufacturer's support website.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your Aruba 7010 Controller.
5.1 Cleaning
Periodically clean the exterior of the controller with a soft, dry cloth. Do not use liquid or aerosol cleaners directly on the device. Ensure ventilation openings are free from dust and debris.
5.2 Firmware Updates
It is recommended to regularly check for and apply firmware updates from the manufacturer's support website. Firmware updates often include performance enhancements, security patches, and new features.
5.3 Environmental Considerations
Maintain the operating environment within the specified temperature and humidity ranges to prevent hardware failure. Ensure proper airflow around the device.
6. Troubleshooting
This section provides basic troubleshooting steps for common issues. For more complex problems, refer to the detailed troubleshooting guides available on the manufacturer's support portal or contact technical support.
- No Power:
- Verify the power cable is securely connected to both the controller and the power outlet.
- Ensure the power outlet is functional.
- Network Connectivity Issues:
- Check Ethernet cable connections to ensure they are properly seated.
- Verify network configuration settings (IP address, subnet mask, gateway).
- Check status LEDs on the ports for link activity.
- Access Point Not Connecting:
- Ensure the access point is powered on (via PoE or external power).
- Verify the access point is compatible with the controller's firmware version.
- Check controller logs for any error messages related to AP provisioning.
7. Specifications
| Feature | Description |
|---|---|
| Model Number | JW679A |
| Brand | Hpe (Aruba) |
| Switch Type | Managed, Fixed, PoE |
| Number of Ports | 16 (10/100/1000BASE-T with PoE+) |
| SFP Ports | 1G BASE-X SFP |
| PoE+ Power | 150W |
| Max APs Supported | 32 |
| Max Clients Supported | 2000 |
| Item Weight | 10.65 pounds (4.83 kg) |
| Product Dimensions (LxWxH) | 17.1 x 15.7 x 4.7 inches (43.4 x 39.9 x 11.9 cm) |
| Voltage | 3.5E+2 Volts (AC) |
| Case Material | Plastic |
| Interface Type | RJ45 |
| Color | Grey |
| Compatible Devices | Desktop, Laptop, Printer (as network clients) |
| Date First Available | September 8, 2016 |
| UPC | 190017027340 |
8. Warranty and Support
Warranty information for the Aruba 7010 Controller is typically provided at the time of purchase or can be found on the official Hpe (Aruba) website. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the manufacturer's support portal.
For technical support, software downloads, and additional documentation, please visit the official HP Store or the dedicated Aruba support website.
