ECONTROLLY NEW TV REMOTE AKB72914238

User Manual

ECONTROLLY AKB72914238 Remote Control

Introduction

This manual provides instructions for the ECONTROLLY AKB72914238 Replacement Remote Control, designed for use with various LG TV models. This remote control is a direct replacement and requires no programming for operation.

Package Contents:

  • 1 x ECONTROLLY AKB72914238 Remote Control

Compatibility

This remote control is compatible with the following LG TV models:

  • LG TV 42PJ350
  • LG TV 42PJ350-UB
  • LG TV 50PJ350
  • Substitutes for AKB72914201, AKB72914238, AKB72914207, AKB72914209, AKB73615322

Setup

To begin using your ECONTROLLY AKB72914238 remote control, follow these simple steps:

  1. Battery Installation:

    2. Locate the battery compartment on the back of the remote control. Slide the battery cover downwards to open it.

    Back view of the remote control with the battery compartment open, showing slots for two AAA batteries.

    Image: Rear view of the remote control with the battery cover removed, revealing the battery slots.

    Insert two (2) new AAA alkaline batteries into the compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.

    Close the battery cover by sliding it back into place until it clicks securely.

  2. Initial Use:

    3. No programming is required. Once batteries are installed, the remote control is ready for immediate use with compatible LG TV models.

Operating Instructions

The ECONTROLLY AKB72914238 remote control features standard buttons for navigating your LG TV. Refer to the image below for button layout and descriptions.

Front view of the AKB72914238 remote control, showing all buttons and their labels.

Image: Front view of the ECONTROLLY AKB72914238 remote control, displaying all functional buttons.

Remote Control Button Functions
ButtonFunction
POWER (●)Turns the TV On or Off.
ENERGY SAVINGAdjusts the TV's energy saving mode.
AV MODECycles through various AV modes.
INPUTSelects the input source (HDMI, AV, Component, etc.).
TVSwitches to TV mode.
Number Buttons (0-9)Directly selects TV channels.
LISTDisplays the channel list.
FLASHBKReturns to the previously viewed channel.
VOL +/-Adjusts the volume level.
CH +/-Changes the TV channel up or down.
MUTEMutes or unmutes the TV sound.
MENUOpens the main TV menu.
Q.MENUOpens the Quick Menu for common settings.
Navigation Arrows (Up, Down, Left, Right)Navigates through menu options.
ENTERConfirms a selection in menus.
BACKReturns to the previous screen or menu.
INFODisplays information about the current program or input.
EXITExits the current menu or function.
Color Buttons (Red, Green, Yellow, Blue)Perform specific functions depending on the TV menu or application.
Media Control Buttons (Play, Pause, Stop, Rewind, Fast Forward)Controls playback of media content.

Maintenance

To ensure the longevity and optimal performance of your remote control, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe the surface of the remote control. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote.
  • Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA alkaline batteries.
  • Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote.
  • Avoid Extreme Conditions: Do not expose the remote control to direct sunlight, high temperatures, humidity, or water. Avoid dropping the remote or subjecting it to strong impacts.

Troubleshooting

If you encounter issues with your remote control, try the following troubleshooting steps:

Common Issues and Solutions
ProblemSolution
Remote control is not working.
  • Ensure batteries are inserted correctly with the correct polarity (+/-).
  • Replace old batteries with new AAA alkaline batteries.
  • Check for any obstructions between the remote control and the TV's infrared receiver.
  • Ensure you are within the effective range of the TV's IR receiver.
Some buttons are not responding.
  • Check if the button is stuck or dirty. Clean the remote as per maintenance instructions.
  • Ensure the remote is pointed directly at the TV's IR sensor.
  • Verify that the TV model is listed under the compatible models.
Remote control works intermittently.
  • Batteries may be low. Replace them with new ones.
  • Ensure there is no strong light source (like direct sunlight or bright fluorescent lights) interfering with the IR signal.

Specifications

FeatureDetail
Model NumberAKB72914238 (NEW TV REMOTE AKB72914238)
BrandECONTROLLY
Connectivity TechnologyInfrared (IR)
Compatible DevicesLG Televisions (Specific models listed in Compatibility section)
Power Source2 x AAA Batteries (not included)
Product Dimensions7 x 2 x 0.65 inches (approx.)
Item Weight3.2 ounces (approx.)
Special FeatureErgonomic design

© 2024 ECONTROLLY. All rights reserved.

For support, please refer to your product's purchase documentation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.