Klipsch Reference RSB-11 Sound Bar with Wireless Subwoofer User Manual

Introduction

The Klipsch Reference RSB-11 is a high-performance sound bar system designed to elevate your home audio experience. This system includes a sound bar and a wireless subwoofer, providing rich, dynamic sound for movies, music, and games. Its wireless connectivity and easy setup make it a versatile addition to any entertainment setup.

What's in the Box

Upon unpacking, please ensure all components are present:

• Klipsch Reference RSB-11 Sound Bar
• Wireless Subwoofer
• Remote Control
• Power Cords (for sound bar and subwoofer)
• HDMI Cable
• Optical Cable

Image: The Klipsch Reference RSB-11 system, showing the long, slender sound bar, the cubic wireless subwoofer, and the compact remote control. The sound bar is positioned in front of the subwoofer, with the remote control in the foreground.

Setup

1. Placement

• Sound Bar: Place the sound bar directly below your television, centered for optimal audio alignment. Ensure there are no obstructions in front of the sound bar.
• Wireless Subwoofer: Position the wireless subwoofer anywhere in the room. For best bass response, experiment with different locations, typically near a wall or in a corner.

2. Connections

Connect the sound bar to your television using either the HDMI or Optical cable provided.

• HDMI (ARC): For the best audio quality and control, connect the HDMI cable from the sound bar's HDMI ARC port to your TV's HDMI ARC port. This allows your TV remote to control the sound bar's volume.
• Optical: If your TV does not have an HDMI ARC port, connect the Optical cable from the sound bar's OPTICAL IN port to your TV's Optical Digital Audio Out port.

3. Powering On

• Connect the power cord to the sound bar and then to a wall outlet.
• Connect the power cord to the wireless subwoofer and then to a wall outlet. The subwoofer will automatically pair with the sound bar.
• Press the Power button on the sound bar or remote control to turn on the system.

Operating Instructions

Basic Controls

• Power: Press the power button on the sound bar or remote to turn the system on or off.
• Volume: Use the Volume Up (+) and Volume Down (-) buttons on the remote or sound bar to adjust the audio level.
• Input Selection: Press the Input button on the remote or sound bar to cycle through available inputs (HDMI, Optical, Bluetooth).
• Subwoofer Level: Use the Subwoofer Level buttons on the remote to adjust the bass output.

Bluetooth Pairing

To connect a Bluetooth device:

1. Press the Bluetooth button on the remote or sound bar. The Bluetooth indicator light will flash.
2. On your mobile device, enable Bluetooth and select "Klipsch RSB-11" from the list of available devices.
3. Once connected, the Bluetooth indicator light will glow solid. You can now stream audio from your device.

Maintenance

To ensure the longevity and optimal performance of your Klipsch RSB-11 system:

• Cleaning: Use a soft, dry cloth to wipe down the sound bar and subwoofer. Avoid using liquid cleaners or abrasive materials.
• Ventilation: Ensure proper ventilation around both units to prevent overheating. Do not block any vents.
• Environment: Keep the system away from direct sunlight, heat sources, and excessive moisture.

Troubleshooting

Specifications

Warranty Information

This Klipsch product is covered by a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Klipsch website for detailed terms and conditions regarding coverage, duration, and claims procedures. Keep your proof of purchase for warranty service.

Support

For further assistance, technical support, or to view the complete product manual, please visit the official Klipsch support website:

www.klipsch.com/support

You may also find helpful FAQs and community forums on their website.