Product Overview
Image: The Dynasty Hardware Augusta Commercial Passage Lever in Satin Chrome.
The Dynasty Hardware Augusta Commercial Passage Lever is an ADA compliant, Grade 2 commercial duty door lever designed for areas requiring free passage without locking. This lever features a durable zinc alloy construction with a satin chrome finish, suitable for high-traffic environments.
- Commercial Grade 2 Durability: ANSI Grade 2 certified for dependable performance in hallways, closets, and common areas where no locking is required. Heavy-duty internal springs and a reinforced zinc alloy lever body ensure smooth, consistent operation and long-lasting durability under frequent daily use.
- Passage Function: Both exterior and interior levers remain unlocked at all times, allowing free passage without keys or locking. Ideal for hallways, closets, conference rooms, and other interior doors where secure locking is not needed.
- ADA Compliant & Non-Handed Design: Fully ADA compliant for barrier-free accessibility. Non-handed lever fits both left- and right-swing doors, simplifying installation.
- Standard Commercial Door Fit: Designed for standard 161 door prep with a 2-1/8″ bore. Fits doors 1-3/8″ to 1-3/4″ thick and includes a UL 3-hour fire-rated 2-3/4″ backset latch (optional 2-3/8″ backset sold separately).
- Complete Installation Kit: Includes lever, thru bolts, strike plate, latch, dust box, screw packs, mounting template, and instructions. Optional through-bolt installation helps prevent lever sag.
Setup and Installation
Before beginning installation, ensure all components are present and refer to the included mounting template for precise drilling. A standard 161 door prep with a 2-1/8" bore is required.
Components Included:
- Door Levers (Interior and Exterior)
- Latch Assembly (2-3/4" backset standard)
- ASA Strike Plate
- Dust Box
- Thru Bolts (Optional use)
- Screw Packs
- Installation Template
Installation Steps:
- Prepare the Door: Use the provided template to mark and drill holes for the latch and lever assembly. Ensure the door has a 2-1/8" bore for the lever and a 1" bore for the latch.
- Install the Latch: Insert the latch assembly into the edge of the door. Secure it with screws. Ensure the latch bolt faces the correct direction for door closure.
Image: Detail of the latch mechanism, showing the standard 2-3/4 inch backset. An optional 2-3/8 inch backset is sold separately.
- Assemble the Levers: Connect the interior and exterior lever assemblies through the door. Ensure the spindle engages correctly with the latch mechanism.
Image: Exploded view of the lever components, illustrating how the internal parts connect.
- Secure the Levers: Fasten the levers using the provided screws. For added stability and to prevent lever sag, utilize the optional thru-bolts by passing them through the door and securing them.
Image: Internal view of the lever assembly highlighting the individual spring and optional thru-bolts for enhanced durability and to prevent lever sag.
- Install the Strike Plate and Dust Box: Install the dust box into the door frame, followed by the ASA strike plate. Secure with screws.
Image: The complete lever assembly shown with the ASA strike plate, ready for installation.
- Test Operation: Verify that both levers operate smoothly and the latch retracts and extends properly.
Installation Video Guide:
Video: Dynasty Hardware August Commercial Door Lever - Features. This video provides an overview of the lever's features and may assist with understanding components during installation.
Video: Dynasty Augusta Commercial Door Lock Functions Explained. This video explains the various functions of Dynasty Augusta door locks, which can be helpful for understanding the passage lever's operation.
Operating Instructions
The Dynasty Hardware Augusta Commercial Passage Lever is designed for simple, unrestricted access. It does not feature a locking mechanism.
- To open the door, simply depress either the interior or exterior lever handle.
- The latch bolt will retract, allowing the door to open.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
This passage function is ideal for doors that do not require security, such as hallway doors, closet doors, or connecting doors within an office suite.
Care and Maintenance
Proper care ensures the longevity and appearance of your Dynasty Hardware Augusta Commercial Passage Lever.
- Cleaning: Clean the satin chrome finish with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishing agents, as these can damage the finish.
- Lubrication: Periodically, a small amount of silicone-based lubricant can be applied to the latch bolt mechanism to ensure smooth operation. Do not use oil-based lubricants, which can attract dust and debris.
- Inspection: Regularly check all screws and fasteners for tightness. Re-tighten if necessary to prevent lever sag or loose operation.
- Environmental Factors: While durable, extreme moisture or corrosive environments may affect the finish over time.
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| Lever is loose or sags | Mounting screws or thru-bolts are loose. | Tighten all visible mounting screws. If thru-bolts were used, ensure they are securely fastened. |
| Latch bolt does not retract smoothly | Accumulation of dirt or lack of lubrication in the latch mechanism. | Clean the latch bolt and apply a silicone-based lubricant. Check for any obstructions in the door frame. |
| Door does not close properly | Strike plate misalignment or door frame issues. | Check the alignment of the strike plate with the latch bolt. Adjust the strike plate position if necessary. Inspect the door frame for warping or damage. |
| Lever does not return to horizontal position | Internal spring issue or improper installation. | Ensure the lever assembly is installed correctly and the internal springs are not obstructed. If the problem persists, the unit may require replacement. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | AUG-30-26D |
| Function | Passage (Non-locking) |
| Material | Zinc Alloy |
| Finish | Satin Chrome (26D) |
| ANSI Grade | Grade 2 Commercial Duty |
| ADA Compliant | Yes |
| Door Thickness | 1-3/8" to 1-3/4" (35mm to 44mm) |
| Door Prep (Bore) | 2-1/8" (54mm) diameter hole |
| Backset | 2-3/4" (70mm) standard (2-3/8" optional, sold separately) |
| Latch Front | 1-1/8" x 2-1/4" Square Corner |
| Strike Plate | ANSI (4-7/8" x 1-1/4") |
| Rosette Diameter | 3-5/16" (85mm) |
| Handing | Non-handed (Reversible) |
| Fire Rating | UL 3-hour fire-rated latch |
| Item Weight | 0.27 g (Note: This value appears to be a data entry error. Actual weight will be significantly higher.) |
Image: Dimensional drawing of the Augusta lever, indicating measurements such as 3-5/16" rosette diameter and 4-3/4" lever projection.
Warranty Information
Dynasty Hardware products are manufactured to high-quality standards. Specific warranty details may vary. Please refer to the packaging or contact Dynasty Hardware directly for comprehensive warranty information regarding your Augusta Commercial Passage Lever.
Generally, door hardware is covered against defects in material and workmanship under normal use. Keep your proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact Dynasty Hardware customer service.
- Online Resources: Visit the official Dynasty Hardware Store on Amazon for product information and additional resources.
- Contact Information: Refer to the product packaging or the Dynasty Hardware website for the most current contact details.