1. Introduction
The DEWALT DWV2759 5-Piece Dust Extractor Accessory Kit is designed to complement your DEWALT dust extractor system, aiding in maintaining a clean work environment. This kit provides various cleanup accessories for use with compatible DEWALT dust extractors.
Image 1.1: The DEWALT DWV2759 Dust Extractor Accessory Kit, showing all five components.
Kit Contents:
- Floor Sweeper
- Rubber Squeegees for Floor Sweeper (set)
- Steel Extension Wands (2 pieces)
- Crevice Tool
- Brush Tool
- AirLock Adaptor
2. Setup and Assembly
This accessory kit is designed for quick and easy attachment to compatible DEWALT dust extractors. The AirLock Adaptor ensures a secure connection to the dust extractor hose.
Connecting the AirLock Adaptor:
- Ensure your DEWALT dust extractor (models DWV012 and DWV010 are compatible) is turned off and unplugged.
- Attach the AirLock Adaptor to the hose of your dust extractor. The adaptor is designed for a secure, twist-and-lock connection.
- Verify the adaptor is firmly seated to prevent air leaks and maintain optimal suction.
Attaching Accessories:
- Steel Extension Wands: Connect the steel extension wands to the AirLock Adaptor or directly to the dust extractor hose if applicable. These wands can be connected to each other to extend reach.
- Floor Sweeper: Attach the floor sweeper to the end of an extension wand. The rubber squeegees can be inserted into the floor sweeper for wet pickup or removed for dry debris.
- Crevice Tool: For narrow spaces and tight corners, attach the crevice tool to an extension wand or directly to the AirLock Adaptor.
- Brush Tool: Use the brush tool for dusting surfaces or agitating stubborn debris. Attach it to an extension wand or the AirLock Adaptor.
Note: Some users have reported that certain accessory connections rely on friction and may require a firm push to ensure a secure fit. Ensure all connections are tight before operation to prevent loss of suction.
3. Operating Instructions
Once the desired accessory is attached, operate your DEWALT dust extractor according to its specific instructions. The accessories are designed to enhance the versatility of your dust extraction system for various cleaning tasks.
Accessory Usage:
- Floor Sweeper: Ideal for large area cleanup of dry debris on hard floors, tile, hardwood, and bare floor surfaces. For wet pickup, ensure the rubber squeegees are installed.
- Steel Extension Wands: Use these to extend your reach for floor cleaning or accessing high areas.
- Crevice Tool: Perfect for vacuuming dust and debris from tight spaces, corners, edges, and upholstery seams.
- Brush Tool: Effective for cleaning delicate surfaces, dashboards, or dislodging embedded dirt from carpets and fabrics before vacuuming.
Always ensure the dust extractor's filter is clean and properly installed for optimal performance when using these accessories.
4. Maintenance
Regular maintenance of your accessory kit will ensure longevity and consistent performance.
- Cleaning: After each use, especially when picking up fine dust or wet debris, clean the accessories. Wipe down plastic and steel components with a damp cloth.
- Rubber Squeegees: Inspect the rubber squeegees on the floor sweeper for wear or damage. Replace if necessary to maintain effective wet pickup.
- Brush Tool: Remove any tangled hair or debris from the bristles of the brush tool.
- Storage: Store all components in a clean, dry place to prevent damage and corrosion.
5. Troubleshooting
If you encounter issues while using the accessory kit, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Loss of Suction | Loose accessory connection; clogged accessory; dust extractor filter issues. | Ensure all accessories are firmly attached. Clear any blockages in the wands or tools. Check and clean/replace the dust extractor filter. |
| Accessories Detach During Use | Connections not secure (friction fit); wear on connection points. | Push connections together firmly. If connections become too loose over time, consider using tape for a temporary fix or replacing worn components. |
| Ineffective Floor Sweeper | Worn or missing rubber squeegees (for wet pickup); bristles clogged (for dry pickup). | Inspect and replace rubber squeegees if damaged. Clean bristles of any debris. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | DEWALT |
| Model Name | DWV2759 |
| Included Components | Floor Sweeper, Rubber Squeegees, Steel Extension Wands, Crevice Tool, Brush Tool, AirLock Adaptor |
| Compatibility | DEWALT Dust Extractors DWV012 and DWV010 |
| Surface Recommendation | Hard Floor, Tile Floor, Hardwood, Bare Floor |
| Number of Items | 5-Piece Kit (includes multiple items within some categories, e.g., 2 wands, set of squeegees) |
| GTIN/UPC | 885911333566 |
7. Warranty and Support
DEWALT products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your original dust extractor or visit the official DEWALT website. For technical support or assistance with replacement parts, please contact DEWALT customer service.
You can find contact information and further resources on the official DEWALT website: www.dewalt.com