UpBright 3-Prong 42V AC/DC Adapter User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your UpBright 3-Prong 42V AC/DC Adapter. This power supply is designed to be compatible with various models of the Hover-1 Rocket Electric Scooter, specifically those requiring a 42V output for their 35.2V/36V 2.0Ah Lithium-ion (Li-ion) batteries.

Please read this manual thoroughly before using the adapter to ensure proper operation and to prevent damage to the product or connected devices.

2. Important Safety Information

• Compatibility Check: This adapter provides a 42V output and features a 3-Prong connector. It is crucial to verify that your device, specifically your Hover-1 Rocket Electric Scooter, requires a 42V input and has a compatible 3-Prong charging port. This adapter is NOT for 29.4V or 25.2V versions of devices. Using an incompatible adapter can cause severe damage to your device and pose safety risks.
• Protection Features: The adapter is equipped with Over Voltage output Protection (OVP), Over Current output Protection (OCP), and Short Circuit output Protection (SCP) to safeguard both the adapter and your device from electrical hazards.
• Indoor Use Only: This adapter is designed for indoor use in dry conditions. Do not expose it to rain, moisture, or extreme temperatures.
• Ventilation: Ensure adequate ventilation around the adapter during use. Do not cover it or place it in an enclosed space that could impede airflow.
• Handle with Care: Avoid dropping or subjecting the adapter to strong impacts. Do not attempt to open or modify the adapter. Refer all servicing to qualified personnel.
• Cord Safety: Always handle the adapter by the plug, not the cord. Do not pull the cord to disconnect from the outlet. Keep the cord away from heat sources, sharp edges, and moving parts.
• Children and Pets: Keep the adapter and its cord out of reach of children and pets.

3. Package Contents

Upon opening your package, please ensure all items listed below are present and in good condition:

• 1 x UpBright 3-Prong 42V AC/DC Adapter
• 1 x 3-Prong Connector (integrated with the adapter cable)

Image 1: The UpBright 3-Prong 42V AC/DC Adapter with its integrated cable and 3-prong connector. This is the main component included in the package.

4. Setup Instructions

Follow these steps to properly set up your UpBright AC/DC Adapter:

1. Inspect the Adapter: Before connecting, visually inspect the adapter and its cable for any signs of damage, such as frayed wires or cracked casing. Do not use if damaged.
2. Identify the Charging Port: Locate the charging port on your Hover-1 Rocket Electric Scooter. It should be a circular port with three pins inside and a convex slot.
3. Connect the Adapter to the Scooter: Align the 3-Prong connector of the UpBright adapter with the charging port on your scooter. The groove on the adapter's connector must match the convex slot on the scooter's charging port. Gently push the connector in until it is firmly seated. Do not force the connection.


Image 2: Detailed view of the 3-Prong inline female connector and the corresponding charging port. Note the groove on the connector and the convex slot on the port, which must align for proper connection. The connector measures approximately 8 mm (0.31 inch) in diameter.

4. Connect to Power Outlet: Plug the AC plug of the adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
5. Verify Connection: Once connected, the charging indicator on your scooter (if available) should illuminate, indicating that charging has begun.

5. Operating Instructions

The UpBright 3-Prong 42V AC/DC Adapter is designed for straightforward operation:

• Charging Process: Once properly connected to both the scooter and a power outlet, the adapter will automatically begin charging the scooter's battery.
• Charging Indicators: Refer to your Hover-1 Rocket Electric Scooter's user manual for specific information regarding its charging indicator lights (e.g., red for charging, green for fully charged). The UpBright adapter itself does not typically feature external charging indicator lights.
• Charging Time: Charging time will vary depending on the battery's current charge level and capacity. Avoid overcharging by disconnecting the adapter once the scooter's battery is fully charged, as indicated by the scooter's charging system.
• Disconnection: To disconnect, first unplug the adapter from the wall outlet, then gently remove the 3-Prong connector from the scooter's charging port.

Image 3: Various models of the Hover-1 Rocket Electric Scooter, including DSA-RCKT-GRN, DSA-RCKT-PRP, DSA-RCKT-BLU, DSA-RCKT-BLK, and DSA-RCK2-PNK. This adapter is compatible with these models that use a 35.2V/36V 2.0Ah Li-ion battery and require a 42V input.

6. Care and Maintenance

Proper care will extend the life of your UpBright AC/DC Adapter:

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly winding the cable to prevent damage.
• Avoid Physical Stress: Do not bend the cable sharply, pull on it excessively, or place heavy objects on it.

7. Troubleshooting

If you encounter issues with your UpBright AC/DC Adapter, consider the following common solutions:

• No Charging Indication:
  • Ensure the adapter is securely plugged into both the wall outlet and the scooter's charging port.
  • Try plugging the adapter into a different wall outlet to rule out a faulty outlet.
  • Verify that the scooter's charging port is clean and free of debris.
• Scooter Not Charging / Battery Not Accepting Charge:

  Rechargeable batteries have a finite lifespan, typically 1 to 3 years. If your scooter's battery is old or dead, it may no longer accept a charge, even if the charger is functioning correctly. This is a common issue and does not necessarily indicate a faulty charger.

  • If possible, test the charger's output voltage with a voltmeter to confirm it is providing the correct 42V output.
  • Consider the age and condition of your scooter's battery. If it's old, it might need replacement.
• Adapter Overheating:
  • Ensure the adapter is in a well-ventilated area and not covered.
  • Disconnect the adapter and allow it to cool down. If overheating persists, discontinue use and contact support.

If these steps do not resolve the issue, please refer to the Warranty and Support section for further assistance.

8. Product Specifications

9. Warranty and Support

UpBright stands behind the quality of its products:

• Refund Policy: UpBright offers a 30-day refund policy from the date of purchase.
• Exchange Policy: The product is covered by a 24-month exchange policy for manufacturing defects.
• Warranty Certificate: This product comes with an UpBright Limited Warranty Certificate. Please refer to the certificate for full terms and conditions.

Image 4: This image displays the UpBright Limited Warranty Certificate, indicating the product's warranty coverage. It also shows examples of international outlet adapters (AU, EU, UK) that may be provided for international orders to ensure compatibility with local power outlets.

For support inquiries, please visit the official UPBRIGHT Store on Amazon or contact their customer service directly.