MPOWER B01LG5ZEFS

Download PDF
Contents

MPOWER Credit Card Diamond Sharpener Stone User Manual

Model: B01LG5ZEFS

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of your MPOWER Double-Sided Credit Card Diamond Stone. This versatile sharpening tool features Diamond Cross technology, offering exceptional abrasion and durability for various sharpening tasks.

The stone is designed with a stainless steel core, ensuring it is 100% rustproof, and includes a clever removable grip for enhanced ergonomics and control during use.

2. Product Overview

2.1 Key Features

  • Dual Grit Design: Features both 300-grit (coarse) and 600-grit (fine) surfaces for versatile sharpening needs.
  • Diamond Cross Technology: Ensures unparalleled abrasion rate and outstanding durability.
  • Stainless Steel Core: Provides 100% rustproof performance.
  • Removable Grip: Enhances ergonomics and control, allowing for comfortable and secure handling.
  • Compact Size: Designed in a credit card format for portability and ease of storage.

2.2 Components

The MPOWER Credit Card Diamond Sharpener Stone consists of:

  • One double-sided diamond sharpening stone (300-grit and 600-grit).
  • One removable ergonomic grip.
MPOWER Credit Card Diamond Sharpener Stone, 600 grit side

Figure 1: The MPOWER Credit Card Diamond Sharpener Stone showing the 600 grit side with the removable grip attached.

MPOWER Credit Card Diamond Sharpener Stone, 300 grit side

Figure 2: The MPOWER Credit Card Diamond Sharpener Stone showing the 300 grit side with the removable grip attached.

3. Setup

The MPOWER Diamond Stone is ready for use directly out of the packaging. No assembly is required.

  1. Identify Grit Sides: The stone has two distinct sides:
    • The 300-grit (coarse) side is for initial sharpening of very dull or damaged edges, or for rapid material removal.
    • The 600-grit (fine) side is for refining the edge after coarse sharpening, or for general maintenance of moderately dull tools.
  2. Attach Grip (Optional): The removable grip can be attached to either side of the stone for improved handling and comfort during sharpening. Ensure it is securely fastened.

4. Operating Instructions

Always exercise caution when sharpening to prevent injury. Wear appropriate safety gear, such as cut-resistant gloves, if necessary.

4.1 General Sharpening Principles

  • Angle Consistency: Maintain a consistent angle between the tool's edge and the sharpening stone throughout the sharpening process.
  • Light Pressure: Apply light, consistent pressure. Excessive pressure does not speed up sharpening and can damage the stone or the tool.
  • Lubrication: While diamond stones can be used dry, a small amount of water or light oil can help float away swarf (metal particles) and keep the stone clean, improving sharpening efficiency.
  • Burr Formation: Sharpen one side until a burr (a slight curl of metal) forms along the opposite edge. Then, switch sides and repeat the process.

4.2 Sharpening Procedure

  1. Select Grit: For very dull or damaged edges, begin with the 300-grit (coarse) side. For general maintenance or refining, start with the 600-grit (fine) side.
  2. Position Tool: Hold the tool firmly, ensuring the edge is presented to the stone at the desired sharpening angle.
  3. Stroke Motion: Using smooth, controlled strokes, move the tool's edge across the diamond surface. You can use a push-pull motion or strokes in one direction, depending on the tool and your preference. Ensure the entire edge makes contact with the stone.
  4. Repeat and Refine: Continue sharpening on the coarse side until the edge is restored and a burr is felt. Then, switch to the 600-grit (fine) side to remove the burr and further refine the edge for a sharper finish. Reduce pressure as you move to the finer grit.
  5. Check Sharpness: Carefully test the sharpness of the tool. Repeat the process if further sharpening is needed.
Person using MPOWER Credit Card Diamond Sharpener Stone on a saw blade

Figure 3: Demonstrating the use of the MPOWER Credit Card Diamond Sharpener Stone on a saw blade, highlighting its versatility for various tools.

5. Maintenance

Proper maintenance will ensure the longevity and effectiveness of your MPOWER Diamond Stone.

  • Cleaning: After use, especially if using oil or water, wipe the stone clean with a damp cloth to remove any metal particles (swarf) or residue. For dry use, a stiff brush can help clear debris from the diamond surface.
  • Storage: Store the sharpener in a dry place to prevent any potential buildup of grime, although the stainless steel core is rustproof. The compact size allows for easy storage in a toolbox, drawer, or pocket.
  • No Flattening Required: Unlike traditional abrasive stones, diamond stones do not dish or wear unevenly, so they do not require flattening.

6. Troubleshooting

If you encounter issues with your MPOWER Diamond Stone, consider the following:

  • Tool not getting sharp:
    • Ensure you are using the correct sharpening angle for your tool.
    • Verify you are starting with the appropriate grit (coarse for very dull, fine for maintenance).
    • Check for burr formation; if no burr is forming, you may not be removing enough material or maintaining a consistent angle.
  • Stone feels clogged:
    • Clean the stone thoroughly with water and a brush, or a mild detergent if necessary, to remove embedded metal particles.
    • Consider using a light lubricant (water or oil) during sharpening to help prevent clogging.

7. Specifications

AttributeValue
Model Number (ASIN)B01LG5ZEFS
UPC815521000404
Grit Types300 (Coarse), 600 (Fine)
MaterialStainless Steel, Diamond Abrasive
Product Dimensions2.95 x 2.64 x 0.47 inches
Item Weight3.2 ounces
ManufacturerM Power Tools Ltd

8. Warranty and Support

The MPOWER Credit Card Diamond Sharpener Stone is backed by M.POWER’S Three-Year Guarantee, as stated in the product description.

For warranty claims, technical support, or any inquiries regarding your product, please contact MPOWER Tools directly through their official website or the retailer from whom you purchased the product.

Manufacturer: M Power Tools Ltd

Brand: MPOWER

For the most up-to-date contact information, please visit the official MPOWER Tools website or refer to your purchase documentation.

© 2024 MPOWER. All rights reserved. This manual is for informational purposes only.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.