1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Yardworks Dual-Line String Trimmers Replacement Spool. Please read this manual thoroughly before use to ensure safe and efficient operation.
2. Safety Information
WARNING: Always prioritize safety when working with power tools and their accessories. Failure to follow these instructions may result in serious injury.
- Use with caution to avoid contact with flying debris.
- Wear appropriate safety gear during operation, including eye protection, gloves, and sturdy footwear.
- Ensure the string trimmer is turned off and disconnected from its power source (battery removed or unplugged) before attempting to replace the spool.
- Battery-powered tools may pose risks related to battery leakage or explosion. Refer to your trimmer's specific safety guidelines for battery handling.
- Keep children and bystanders away from the work area.
3. Product Overview
The Yardworks Dual-Line String Trimmers Replacement Spool is designed to provide a continuous supply of cutting line for compatible Yardworks string trimmers. It features a dual-line system for efficient trimming.
An image showing the Yardworks Dual-Line String Trimmer Replacement Spool. The spool is black with blue trimmer line wound around it, packaged in clear plastic with a grey and yellow cardboard backing. The packaging indicates '20' Length (6.1 m)' and '0.065" Diameter (1.65 mm)'.
Key Features:
- Dual-Line System: Provides two cutting lines for improved efficiency.
- Line Length: 20 feet (6.1 meters) of cutting line.
- Line Diameter: 0.065 inches (1.65 mm).
- Compatibility: Designed for specific Yardworks string trimmer models (060-2259, 060-2279, or 060-2288).
4. Setup / Installation
Replacing the spool requires careful attention to ensure proper function and safety. Refer to your string trimmer's specific user manual for detailed instructions on accessing the trimmer head.
Installation Steps:
- Disconnect Power: Ensure the string trimmer is completely powered off and disconnected from its power source (e.g., remove battery pack or unplug from outlet).
- Remove Trimmer Head Cap: Locate the release tabs or buttons on the trimmer head and press them to remove the cap or cover.
- Remove Old Spool: Carefully lift out the empty or damaged spool from the trimmer head. Note its orientation for correct installation of the new spool.
- Install New Spool: Place the new Yardworks Dual-Line Replacement Spool into the trimmer head, ensuring the lines are properly aligned with any guides or eyelets. Make sure the spool clicks securely into place.
- Replace Trimmer Head Cap: Reattach the trimmer head cap, ensuring it is firmly secured. You should hear a click if it locks into place.
- Check Line Extension: Gently pull on the trimmer lines to ensure they extend freely from the head.
5. Operating Instructions
Once the replacement spool is installed, the string trimmer is ready for operation. The spool automatically feeds line as needed during use, or can be manually advanced depending on your trimmer model.
Line Feeding:
- Automatic Feed: Many trimmers feature an automatic line feed system that extends the line as it wears down.
- Bump Feed: Some trimmers require a gentle tap on the ground while operating to advance the line. Refer to your trimmer's manual for its specific line feeding mechanism.
- Manual Feed: In some cases, you may need to manually pull out the line after pressing a release button on the trimmer head.
Always ensure the line is extended to the proper cutting length before and during operation for optimal performance.
6. Maintenance
Proper care of your replacement spool can extend its lifespan and ensure consistent performance.
- Storage: Store unused spools in a cool, dry place away from direct sunlight and extreme temperatures. This helps prevent the trimmer line from becoming brittle.
- Cleanliness: Keep the spool and trimmer head free from debris, dirt, and grass clippings.
- Inspection: Periodically inspect the spool for any damage or excessive wear. Replace if necessary.
7. Troubleshooting
If you encounter issues with your replacement spool, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Line not feeding | Line tangled on spool; Spool incorrectly installed; Debris in trimmer head; Line fused together. | Remove spool and untangle line; Reinstall spool correctly; Clean trimmer head; Try to separate fused line or replace spool. |
| Line breaks too frequently | Hitting hard surfaces; Line too old/brittle; Incorrect line diameter for trimmer. | Avoid hitting concrete, rocks, etc.; Store spools properly; Ensure this spool is the correct diameter (0.065") for your trimmer. |
| Trimmer vibrates excessively | Spool not seated correctly; Damaged spool. | Reinstall spool, ensuring it clicks into place; Replace spool if damaged. |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Yardworks |
| Item Model Number | 060-2259, 060-2279, or 060-2288 |
| ASIN | B01LFDDAC0 |
| UPC | 772418427181 |
| Line Type | Dual-Line |
| Line Length | 20 feet (6.1 meters) |
| Line Diameter | 0.065 inches (1.65 mm) |
| Colour | Black (spool) / Blue (line) |
| Parcel Dimensions | 18 x 11.4 x 3 cm; 80 g |
| Assembly Required | Yes (installation into trimmer) |
| Date First Available | Sept. 2 2016 |
9. Warranty and Support
For information regarding warranty coverage or technical support for your Yardworks Dual-Line String Trimmers Replacement Spool, please refer to the documentation provided with your original string trimmer or contact Yardworks customer service directly. Specific warranty terms may vary.
