Introduction
Thank you for choosing the Beautyrest Duke Luxury Oversize Electric Throw Blanket. This manual provides important information regarding the safe operation, maintenance, and care of your new heated throw. Please read all instructions carefully before use and retain this manual for future reference.
This electric throw features Secure Comfort heated technology, which adjusts the temperature based on overall, spot, and ambient room temperatures for consistent warmth. It also emits virtually no electromagnetic field emissions, ensuring a comfortable and confident user experience.
Image: The Beautyrest Duke Electric Throw Blanket in Champagne color, draped over a sofa.
Important Safety Information
To reduce the risk of burns, electric shock, fire, or injury, this product must be used in accordance with the following instructions:
- Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
- Do not use if the blanket is wet.
- Do not use with pins or other metallic objects.
- Do not use if the power cord or controller is damaged.
- Always unplug the blanket when not in use.
- Do not dry clean this product. Cleaning solvents may damage the insulation of the heating element.
- Do not tuck in, pinch, or fold the power cord.
- Ensure the controller is not covered or placed under the blanket during use to prevent overheating.
Setup Instructions
- Unpack: Carefully remove the electric throw from its packaging. Inspect the blanket and controller for any signs of damage.
- Connect Controller: Locate the connector on the blanket and the corresponding plug on the controller cord. Firmly push the plug into the connector until it clicks securely into place. Ensure a tight connection.
- Placement: Lay the electric throw flat on your bed or couch. Ensure there are no kinks or folds in the heating wires.
- Power Connection: Plug the power cord into a standard 120V AC electrical outlet.
Image: A person comfortably using the electric throw blanket on a sofa.
Operating Instructions
Your Beautyrest Duke Electric Throw Blanket is designed for ease of use with a simple controller.
- Power On: Press the 'ON/OFF' button on the controller to turn on the blanket. The indicator light will illuminate.
- Select Heat Setting: Use the 'HEAT' button to cycle through the 3 available heat settings (Low, Medium, High). Select your desired warmth level.
- Auto Shut-Off: The blanket features a 2-hour automatic shut-off function for safety and energy conservation. After approximately 2 hours of continuous use, the blanket will automatically turn off. To restart, simply press the 'ON/OFF' button again.
- Power Off: Press the 'ON/OFF' button to turn off the blanket when no longer needed. Always unplug the blanket from the wall outlet when not in use.
Video: An official product video demonstrating the features and use of the Beautyrest Heated Throw. This video highlights the 3 heat settings, 2-hour auto shut-off, virtually no EMF emissions, 5-year warranty, and machine washable design.
Care and Maintenance
Proper care ensures the longevity and safe operation of your electric throw. Always disconnect the controller from the blanket and unplug the power cord from the wall outlet before cleaning.
Washing Instructions:
- Pre-soak: Pre-soak the blanket for 5-15 minutes in cold water with a small amount of mild detergent.
- Machine Wash: Machine wash on a cold, gentle cycle. Use minimal detergent. If there is no free movement in your washer, use a large capacity commercial washer.
- Rinse: Rinse thoroughly in cold water.
- Spin Dry: Remove immediately after the spin cycle to prevent creasing.
Drying Instructions:
- Tumble Dry: Tumble dry on a medium or low heat setting for no more than 5 minutes.
- Air Dry: Gently stretch the blanket to its original size and hang to finish drying.
- Do Not: Do not hang with clothespins. Do not iron. Do not dry clean.
Image: Visual guide for washing and drying the electric throw blanket.
Troubleshooting
If your electric throw is not operating correctly, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket does not heat. | Power cord not securely plugged in. Controller not connected properly. Outlet not functioning. | Ensure all connections are secure. Test the outlet with another appliance. |
| Controller light is blinking. | Error condition or internal fault. | Unplug the blanket from the wall outlet for 5 minutes, then plug it back in. If the issue persists, contact customer support. |
| Blanket feels too warm or not warm enough. | Incorrect heat setting. Ambient room temperature. | Adjust the heat setting on the controller. Allow up to 30 minutes for the blanket to reach its full temperature. |
Product Specifications
- Model Name: Duke
- Model Number: BR50-0751
- Dimensions: 50 inches (W) x 70 inches (L)
- Material: 100% Polyester (Faux Fur)
- Heat Settings: 3
- Auto Shut-Off: 2 Hours
- Care: Machine Washable
- Item Weight: 4.3 Pounds
- Color: Champagne (as per current product)
Image: Diagram showing the 50" x 70" dimensions of the throw blanket.
Warranty and Support
This Beautyrest Duke Electric Throw Blanket comes with a manufacturer's 5-year warranty. For warranty claims, technical support, or any questions not covered in this manual, please contact Beautyrest customer service. Refer to the product packaging or the official Beautyrest website for the most current contact information.
