Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your LogiLink SP0051 Bluetooth Speaker. It covers setup, usage, maintenance, and troubleshooting to ensure you get the most out of your device's Bluetooth, MP3 player, and FM radio functionalities.
Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
- Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the speaker to strong impacts.
- Do not disassemble, repair, or modify the speaker yourself. Contact qualified service personnel for any repairs.
- Keep the speaker away from water and other liquids. While it is listed as waterproof, prolonged submersion or exposure to strong jets of water should be avoided.
- Use only the provided charging cable or a certified equivalent.
- Dispose of the battery and speaker according to local regulations.
Package Contents
Please check that all items are present:
- LogiLink SP0051 Bluetooth Speaker
- USB Charging Cable (Micro USB to USB-A with 3.5mm AUX)
- User Manual (this document)
Image: The included USB charging cable, which also functions as an AUX cable.
Product Overview
Familiarize yourself with the speaker's components and controls.
Image: Front view of the LogiLink SP0051 speaker, showing the speaker grille and the LogiLink logo.
Image: Side view of the speaker displaying control buttons: Previous/Volume Down, Play/Pause/Mode, Next/Volume Up, Bluetooth indicator, and Power/MP3 switch.
Image: Side view of the speaker showing the TF (MicroSD card) slot, DC 5V charging port, and AUX input port.
Image: Another side view highlighting the built-in microphone (MIC) and the TF (MicroSD card) slot.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. The charging time is approximately 2 hours.
- Connect the Micro USB end of the charging cable to the DC 5V port on the speaker.
- Connect the USB-A end of the cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. It will turn off or change color when charging is complete.
2. Powering On/Off
- To power on: Slide the "OFF/MP3" switch to the "MP3" position. A blue indicator light will flash.
- To power off: Slide the "OFF/MP3" switch to the "OFF" position.
Image: The speaker with its blue LED indicator light illuminated, signifying power is on or Bluetooth is active.
3. Bluetooth Pairing
The speaker will automatically enter Bluetooth pairing mode when powered on if no MicroSD card is inserted or AUX cable is connected.
- Ensure the speaker is powered on and the blue indicator light is flashing rapidly, indicating it's in pairing mode.
- Enable Bluetooth on your smartphone, tablet, or other device.
- Search for available Bluetooth devices and select "SP0051" from the list.
- Once paired, the blue indicator light will stop flashing and remain solid.
4. MicroSD Card Usage (MP3 Player)
The speaker supports MicroSD (TF) cards for MP3 playback.
- Insert a MicroSD card (with MP3 files) into the TF slot on the speaker.
- The speaker will automatically switch to MP3 mode and begin playing music from the card.
5. AUX Input Usage
Connect non-Bluetooth devices using the 3.5mm AUX cable.
- Connect one end of the 3.5mm AUX cable (integrated with the charging cable) to the AUX port on the speaker.
- Connect the other end to the audio output of your device (e.g., laptop, MP3 player).
- The speaker will automatically switch to AUX mode.
6. FM Radio Setup
To use the integrated FM radio, the USB charging cable acts as an antenna.
- Connect the Micro USB end of the charging cable to the DC 5V port on the speaker. Do not connect the USB-A end to a power source if you only intend to use it as an antenna.
- Power on the speaker.
- Press the Play/Pause/Mode button repeatedly to cycle through modes until you hear static or an FM station.
- To perform an automatic station scan: In FM mode, press and hold the Play/Pause/Mode button. The speaker will scan and save available stations.
Operating the Speaker
Mode Switching
Press the Play/Pause/Mode button to switch between Bluetooth, MicroSD (MP3), AUX, and FM Radio modes.
Volume Control
- To increase volume: Press and hold the Next/Volume Up (+) button.
- To decrease volume: Press and hold the Previous/Volume Down (-) button.
Music Playback (Bluetooth/MicroSD)
- Play/Pause: Press the Play/Pause/Mode button.
- Next Track: Press the Next/Volume Up (+) button briefly.
- Previous Track: Press the Previous/Volume Down (-) button briefly.
Hands-Free Calling (Bluetooth Mode)
When connected via Bluetooth, you can use the speaker for hands-free calls.
- Answer Call: Press the Play/Pause/Mode button briefly when a call comes in.
- End Call: Press the Play/Pause/Mode button briefly during a call.
- Reject Call: Press and hold the Play/Pause/Mode button when a call comes in.
FM Radio Operation
- Change Station: After an automatic scan, press the Next/Volume Up (+) or Previous/Volume Down (-) buttons briefly to cycle through saved stations.
- Automatic Scan: Press and hold the Play/Pause/Mode button to initiate a new scan.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is discharged. | Charge the speaker for at least 2 hours. |
| Cannot pair via Bluetooth. | Speaker is not in pairing mode; device Bluetooth is off; speaker is already connected to another device. | Ensure speaker is on and blue light is flashing. Turn on Bluetooth on your device. Disconnect from other devices. |
| No sound from MicroSD card. | MicroSD card not inserted correctly; no MP3 files on card; speaker not in MP3 mode. | Reinsert MicroSD card. Ensure card contains MP3 files. Press Mode button to switch to MP3 mode. |
| Poor FM radio reception. | Charging cable not connected (acting as antenna); weak signal. | Ensure the USB charging cable is connected to the speaker's DC 5V port. Perform an automatic station scan. Try repositioning the speaker. |
| Sound distortion. | Volume too high; low battery; interference. | Reduce volume. Charge the speaker. Move speaker away from other electronic devices. |
Specifications
| Model Name | SP0051 |
| Bluetooth Version | V3.0 |
| Bluetooth Range | Up to 10 meters |
| Battery Capacity | 400mAh |
| Play Time | Up to 5 hours |
| Charging Time | Approximately 2 hours |
| Speaker Maximum Output Power | 25 Watts |
| Audio Output Mode | Stereo |
| Compatible Devices | MicroSD (TransFlash), MicroSDHC |
| Dimensions | 6 x 6 x 5 cm |
| Weight | 230 g |
| Special Features | Bluetooth 3.0 + EDR, Volume Control, Built-in Microphone, Micro SD Card Reader, FM Radio, Hands-free Function, Bass Xpansion System (BXS) |
| Material | Metal |
| Is Waterproof | True |
Warranty Information
LogiLink products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For detailed warranty information, please refer to the warranty card included with your product or visit the official LogiLink website.
Support
If you encounter any issues or have questions regarding your LogiLink SP0051 Bluetooth Speaker that are not addressed in this manual, please contact LogiLink customer support or visit our website for further assistance.
Website: www.logilink.eu