Soundmaster UR190 Digital Clock Radio Instruction Manual

1. Introduction

Thank you for purchasing the Soundmaster UR190 Digital Clock Radio. This manual provides detailed instructions for the setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure proper functionality and to maximize your listening experience.

2. Safety Information

• Ensure the power adapter voltage matches your local power supply.
• Do not expose the unit to rain, moisture, or extreme temperatures.
• Avoid placing the unit near heat sources or in direct sunlight.
• Do not open the casing; refer all servicing to qualified personnel.
• Keep the unit away from strong magnetic fields.
• Dispose of batteries responsibly according to local regulations.

3. Package Contents

Please check that all items are present:

• Soundmaster UR190 Digital Clock Radio
• AC Power Adapter
• Instruction Manual (this document)

4. Product Overview

Familiarize yourself with the controls and features of your Soundmaster UR190.

Figure 1: Front View of the Soundmaster UR190 Digital Clock Radio. This image displays the front of the radio, featuring a large speaker grille on the left, a digital display in the center, and two rotary knobs for 'VOLUME' and 'SELECT' functions. The 'Soundmaster' logo is visible above the display. The unit has a brown wood-grain finish with a light-colored bezel.

Front Panel Controls:

• Volume Knob: Rotate to adjust audio volume. Press to mute/unmute.
• Select Knob: Rotate to navigate menus or tune radio stations. Press to confirm selections.
• Digital Display: Shows time, date, radio station information, and menu options.
• Speaker Grille: Audio output.

Top Panel Controls:

• Buttons (e.g., Preset, Mode, Alarm): Specific functions for radio presets, changing modes (DAB+/FM), and alarm settings. (Note: Exact button labels are not visible in the provided image, refer to your unit for precise labels.)

Rear Panel / Side Panel:

• Power Input: Connect the AC power adapter here.
• USB Charging Port: For charging external devices.
• Battery Compartment: For backup batteries (1 AAA battery required).
• Antenna: For radio reception.

5. Setup

5.1 Power Connection

1. Connect the supplied AC power adapter to the DC IN port on the back of the unit.
2. Plug the adapter into a standard wall outlet.
3. The unit will power on or enter standby mode.

5.2 Battery Backup

To retain time and alarm settings during a power outage, install a backup battery.

1. Locate the battery compartment on the unit.
2. Insert 1 AAA battery, observing the correct polarity (+/-).
3. Close the battery compartment cover securely.

5.3 Initial Setup (First Use)

Upon first power-on, the unit may prompt you to set the language, time, and date. Follow the on-screen instructions using the Select Knob to navigate and confirm.

6. Operating Instructions

6.1 Power On/Off

Press the Power button (usually on the top panel) to turn the unit on or off (standby mode).

6.2 Radio Operation (DAB+/FM/PLL)

1. Press the Mode button to switch between DAB+, FM, or other available radio modes.
2. Auto Scan: In DAB+ or FM mode, press and hold the Select Knob to initiate an auto-scan for available stations.
3. Manual Tuning: Rotate the Select Knob to manually tune to a frequency.
4. Saving Presets: Once a station is tuned, press the Preset button (if available) and use the Select Knob to choose a preset number, then press again to save.
5. Recalling Presets: Press the Preset button briefly and use the Select Knob to select a saved station.

6.3 Setting the Clock and Date

If not set during initial setup, or to adjust:

1. In standby mode, press and hold the Time Set or Menu button.
2. Use the Select Knob to adjust hours, minutes, day, month, and year.
3. Press the Select Knob to confirm each setting.

6.4 Setting Alarms (Dual Alarm Function)

The UR190 features a dual alarm function, allowing two separate alarm times.

1. Press the Alarm 1 or Alarm 2 button.
2. Use the Select Knob to set the desired alarm time (hour and minute). Press to confirm.
3. Select the alarm source: Buzzer or Radio. If Radio, select the desired station.
4. Choose the alarm frequency: Daily, Weekdays, Weekends, or Once.
5. Confirm all settings. The alarm icon will appear on the display.

6.5 Snooze and Alarm Off

• Snooze: When the alarm sounds, press the Snooze button (often a large button on top) to temporarily silence it for a few minutes.
• Alarm Off: To turn off the alarm completely, press the Alarm 1 or Alarm 2 button again, or the Power button.

6.6 USB Charging Port

Connect your mobile device's USB charging cable to the USB port on the unit to charge it. Note that charging speed may vary depending on the device.

6.7 Display Dimmer

Press the Dimmer button (if available) or navigate through the menu settings to adjust the brightness of the digital display.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the unit. Do not use abrasive cleaners or solvents.
• Storage: If storing the unit for an extended period, disconnect it from power and remove the backup battery.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Soundmaster website. Keep your proof of purchase for warranty claims.

Online Resources: www.soundmaster.de