1. Introduction
The Total Control URC1785 is an 8-in-1 universal remote control designed to simplify your home entertainment experience by consolidating up to eight different device remote controls into one. This remote is compatible with a wide range of brands and device types, including televisions, DVD/Blu-ray players, VCRs, satellite receivers, cable boxes, DVB-T tuners, home theater systems, audio amplifiers, and auxiliary devices. This manual provides essential information for setting up, operating, and maintaining your URC1785 remote control.
2. Product Overview
The URC1785 remote control features a user-friendly layout with dedicated buttons for various functions and device selection. Its infrared technology ensures broad compatibility with most electronic devices. The remote is pre-programmed for ease of setup, and a comprehensive code list is typically included with the product for manual programming.
Figure 1: Front view of the Total Control URC1785 Universal Remote Control, highlighting its array of buttons for various functions and device selection.
Figure 2: The Total Control URC1785 Universal Remote Control displayed in its retail packaging, emphasizing its '8-in-1' capability and compatibility with various device types like TV, DVD, SAT, and Audio.
3. Setup
3.1. Battery Installation
The URC1785 remote control requires two (2) AA batteries for operation. Batteries are not typically included with the product.
- Open the battery compartment cover located on the back of the remote control.
- Insert two AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
3.2. Device Programming
The URC1785 is pre-programmed for many common devices. For other devices or if the pre-programmed codes do not work, manual programming is required. Refer to the detailed configuration guide included with your remote for specific programming instructions and device codes.
Generally, programming involves:
- Turning on the device you wish to control.
- Pressing and holding the 'SETUP' button on the remote until the indicator light illuminates.
- Pressing the device button (e.g., TV, DVD, SAT) you want to program.
- Entering the 3 or 4-digit code for your device's brand from the provided code list.
- Testing the remote's functions. If the device responds, press 'SETUP' again to save the code. If not, try the next code for your brand.
4. Operating Instructions
Once programmed, operating your devices with the URC1785 is straightforward.
4.1. Selecting a Device
To control a specific device, press the corresponding device button at the top of the remote (e.g., TV, VCR, DVD, SAT, AMP, HI-FI, DVB-T, AUX). The indicator light will briefly flash to confirm the selection.
4.2. Basic Functions
- Power (⑂): Turns the selected device on or off.
- Volume (+/-): Adjusts the volume of the selected audio device or TV.
- Channel (CH +/-): Changes channels on the selected TV, SAT, or DVB-T device.
- Number Buttons (0-9): For direct channel entry or menu navigation.
- OK / Navigation Arrows: Used for menu selection and navigation.
- MENU / GUIDE / INFO / EXIT: Accesses device menus, program guides, information displays, or exits current menus.
- Playback Controls (Play, Pause, Stop, Rewind, Fast Forward): Controls media playback on DVD/Blu-ray players or VCRs.
5. Troubleshooting
If you encounter issues with your URC1785 remote control, consider the following:
- Remote not responding:
- Check if the batteries are correctly inserted and have sufficient charge. Replace them if necessary.
- Ensure there is no obstruction between the remote and the device's infrared receiver.
- Specific functions not working:
- Verify that the correct device mode button (e.g., TV, DVD) is selected for the device you are trying to control.
- Some advanced functions of original remotes may not be supported by universal remotes.
- Re-program the device using a different code from the provided list, as some codes may offer better compatibility for certain functions.
- Device not programming:
- Ensure you are following the programming steps precisely as outlined in the configuration guide.
- Try all available codes for your device's brand.
- Confirm the device is powered on during the programming process.
6. Specifications
| Brand | Total Control (Manufacturer), TP-Link (Brand as per some specifications) |
| Model Number | URC1785 |
| Color | Black |
| Product Type | Universal Remote Control |
| Connectivity Technology | Infrared |
| Special Features | Universal Compatibility |
| Compatible Devices | TV, Audio, DVD, Blu-ray, VCR, SAT, Cable, DVB-T, Home Theater, AMP, AUX |
| Maximum Supported Devices | 8 |
| Maximum Range | 10 Meters |
| Batteries Required | 2 x AA batteries |
7. Maintenance
To ensure the longevity and optimal performance of your URC1785 remote control:
- Clean the remote regularly with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
- Do not expose the remote to extreme temperatures, direct sunlight, or high humidity.
- Remove batteries if the remote will not be used for an extended period to prevent leakage.
8. Warranty and Support
Information regarding product warranty, technical support, and replacement parts is typically provided within the product packaging or can be found on the official website of the manufacturer, Total Control, or the brand, TP-Link. Please retain your proof of purchase for warranty claims.
