Kymate RPC-Y1-U

Kymate CT106 CT42 USB Programming Interface Cable User Manual

Model: RPC-Y1-U

Introduction

The Kymate CT106 CT42 USB Programming Interface Cable (Model: RPC-Y1-U) provides a reliable connection between your computer and compatible YAESU or Vertex two-way radios. This cable facilitates programming radio settings, frequencies, and other parameters using appropriate software. It is designed for use with various operating systems, ensuring broad compatibility for radio enthusiasts and professionals.

Setup

Package Contents

  • 1 x Kymate CT106 CT42 USB Programming Cable
  • 1 x CD with USB Driver

Driver Installation

  1. Insert the Driver CD: Place the included CD into your computer's optical drive.
  2. Run the Installer: Locate and run the driver installation program from the CD. Follow the on-screen prompts to complete the installation.
  3. Operating System Compatibility: The drivers support 32-bit and 64-bit operating systems, including Windows 2000, Windows XP, Server 2003, Vista, Server 2008, Windows 7, Windows 8, Windows 10, and Mac OS. For Windows 10, the operating system may automatically install the necessary drivers upon first connection.
  4. Verify Installation: After installation, connect the USB cable to your computer. Open Device Manager (on Windows) and check for a new COM port entry under 'Ports (COM & LPT)'. Note the assigned COM port number.

Connecting the Cable

Connect the USB Type-A end of the programming cable to an available USB port on your computer. Connect the 3.5mm jack end of the cable to the programming port on your compatible YAESU or Vertex radio.

USB Type-A connector end of the programming cable

Image: USB Type-A connector for computer connection.

3.5mm jack connector end of the programming cable

Image: 3.5mm jack connector for radio connection.

Programming Software

Note: This product includes only the programming cable and drivers. Programming software is not included and must be obtained separately. Compatible software options include, but are not limited to, RT Systems software, CHIRP, and ADMS software, depending on your specific radio model.

Operating Instructions

Once the drivers are installed and the cable is connected, you can proceed with programming your radio. The general steps are as follows:

  1. Launch Programming Software: Open your chosen radio programming software (e.g., RT Systems, CHIRP, ADMS).
  2. Select COM Port: Within the software settings, select the COM port number identified during driver installation.
  3. Prepare Radio for Programming: Refer to your radio's instruction manual to put it into programming or clone mode. This often involves holding specific buttons while powering on the radio.
  4. Read/Write Data: Use the software to read the current configuration from your radio, make desired changes, and then write the new configuration back to the radio.

Specific Radio Programming Tips

  • YAESU FT-50R: This cable has been successfully used with RT Systems FT50 Programmer v3.70.22 software on Windows 10.
  • YAESU FT-60: The cable works effectively with Chirp-next software on Windows 10. Windows 10 typically performs automatic setup for the cable.
  • YAESU VX-2R (with CHIRP or VX Commander):
    • To Read: Power on the radio while holding the FW button down. The radio will display "CLONE". Start the "Read from radio" function in CHIRP. When it appears to stall, press the BAND button on the radio to initiate the data transfer.
    • To Write: Power on the radio while holding the FW button down again. Press the V/M button, and the radio will display "WAIT". Start the "Write to radio" function in CHIRP.
  • YAESU VX-3R: This cable is compatible with ADMS-VX3 software. The driver installation creates a USB to Serial port bridge, allowing ADMS-3 to detect the cable and port.

Maintenance

To ensure the longevity and proper function of your programming cable, follow these maintenance guidelines:

  • Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cleaning: Keep the connectors clean and free from dust and debris. Use a soft, dry cloth to wipe the cable if necessary.
  • Handling: Avoid bending or twisting the cable excessively, especially near the connectors, to prevent internal wire damage. Do not pull the cable by the wire; always grasp the connector when plugging or unplugging.

Troubleshooting

  • Cable Not Recognized by Computer:
    • Ensure drivers are correctly installed from the provided CD or automatically by the operating system.
    • Check Device Manager for any unknown devices or driver errors. Reinstall drivers if necessary.
    • Try a different USB port on your computer.
  • Programming Software Cannot Connect to Radio:
    • Verify that the correct COM port is selected in your programming software.
    • Ensure the radio is securely connected to the cable and is powered on.
    • Confirm the radio is in the correct programming or clone mode as per its manual.
    • Ensure your programming software is compatible with your specific radio model and version.
  • Data Transfer Errors:
    • Temporarily disable antivirus or firewall software that might interfere with communication.
    • Ensure no other applications are using the same COM port.

Specifications

  • Model: RPC-Y1-U
  • Brand: Kymate
  • Connector Type: USB Type A (computer end), 3.5mm jack (radio end)
  • Cable Type: USB
  • Cable Length: 1 meter (3.3 feet)
  • Compatible Operating Systems: Windows 2000, Windows XP, Server 2003, Vista, Server 2008, Windows 7, Windows 8, Windows 10, Mac (32-bit and 64-bit)
  • Special Feature: Data Transfer
  • Compatible Radios (YAESU/Vertex): FT-10R, FT-40R, FT-50R, FT-60R, FT1D, FT250, VX-1R, VX-2R, VX-3R, VX-5R, VX-10, VX-14, VX-17, VX-110, VX-130, VX-131, VX-132, VX-150, VX-151, VX-152, VX-160, VX-168, VX-180, VX-210, VX-210A, VX-231, VX-234, VX-300, VX-350, VX-351, VX-354, VX-400, VX-410, VX-414, VX-417, VX-420, VX-424, VX-427, VX428, VX-450, VX-451, VX-454, VX-459, VX530, VX534, EVX-261, EVX-264, EVX-351, EVX-354, EVX-531, EVX-534, EVX-539.

Warranty Information

Specific warranty details for this product are not provided in the available information. Please refer to the seller or manufacturer's official website for current warranty terms and conditions. Retain your proof of purchase for any warranty claims.

Support

For technical assistance or further inquiries regarding the Kymate CT106 CT42 USB Programming Interface Cable, please contact the retailer from whom you purchased the product or visit the Kymate official support channels if available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.