Introduction
This manual provides detailed instructions for the Hormann HSE1 868-BS BiSecur Handheld Transmitter, model 4511728. This device is designed for secure and convenient control of various garage doors and gates equipped with Hormann BiSecur radio technology. Please read this manual thoroughly before initial use to ensure proper setup and operation.
Image: Hormann HSE1 868-BS BiSecur Handheld Transmitter, showcasing its black chrome design and single button.
Key Features:
- Aesthetic Black Chrome Design: Features a modern black chrome structure for visual elegance and a pleasant tactile feel.
- Versatile Button Functions: Allows easy control of various gates and doors with a single button. Includes an integrated key ring eyelet for portability.
- Maximum Security with BiSecur Technology: Advanced BiSecur wireless technology ensures secure and encrypted communication, protecting against unauthorized access.
- Broad Compatibility: Ideal for controlling Hormann SupraMatic E/P, SuperMatic HT, ProMatic, ProMatic Battery, RollMatic, RotaMatic/P/PL, RotaMatic Solar Battery, VersaMatic/P, VersaMatic Solar Battery, LineaMatic/P, and LineaMatic Solar Battery systems. Note: Not suitable for Liftronic garage door operators.
- Easy Installation and Use: Simple installation and programming process for quick readiness.
Setup
1. Battery Installation
The handheld transmitter comes with a lithium-metal battery. If the battery needs to be installed or replaced, follow these steps:
- Carefully open the transmitter casing.
- Insert the new lithium-metal battery, ensuring correct polarity.
- Close the casing securely.
Video: Demonstrates the process of installing or replacing the battery in the handheld transmitter.
2. Programming the Transmitter
The HSE1 868-BS transmitter can be programmed in two primary ways: directly from a compatible control panel or by copying the code from an existing, already programmed BiSecur handheld transmitter.
Programming from a Control Panel:
Refer to your garage door or gate operator's manual for specific instructions on how to put the control panel into programming mode. Generally, this involves pressing a 'PROG' button on the operator. Once in programming mode, activate the button on your new HSE1 868-BS transmitter to pair it.
Video: Illustrates the programming procedure using a compatible control panel.
Programming from another BiSecur Handheld Transmitter:
To copy the code from an existing BiSecur transmitter to your new HSE1 868-BS:
- Hold the new transmitter (receiver) and the existing transmitter (sender) close to each other (within 0-2 cm).
- Press and hold the desired button on the existing transmitter.
- While still holding the button on the existing transmitter, press and hold the button on the new transmitter.
- Wait for the indicator light on the new transmitter to confirm successful programming (e.g., a rapid flash followed by a steady light).
- Release both buttons.
Video: Shows how to program the HSE1 868-BS by copying the code from another BiSecur handheld transmitter.
Operating Instructions
Once programmed, operating the Hormann HSE1 868-BS handheld transmitter is straightforward:
- Ensure you are within the maximum operating range of 30 meters from your garage door or gate operator.
- Press the single button on the transmitter to activate the programmed function (e.g., open, close, or stop the door/gate).
- The indicator light on the transmitter will illuminate during transmission.
Maintenance
Battery Replacement
The HSE1 868-BS handheld transmitter uses a lithium-metal battery. When the transmitter's range decreases significantly or the indicator light becomes dim or fails to illuminate, it is likely time to replace the battery. Please refer to the 'Battery Installation' section under Setup for detailed steps on how to replace the battery.
Always dispose of used batteries responsibly according to local regulations.
Troubleshooting
- Transmitter not working: Check if the battery is correctly installed and has sufficient charge. Replace the battery if necessary.
- Reduced range: This often indicates a low battery. Replace the battery. Ensure there are no significant obstructions between the transmitter and the receiver.
- Door/gate not responding: Verify that the transmitter is correctly programmed to your operator. If unsure, repeat the programming steps. Ensure the operator itself has power and is functioning correctly.
- Interference: Strong radio signals from other devices might interfere with the transmitter's operation. Try operating from a slightly different position.
If problems persist after following these steps, please contact Hormann customer support.
Specifications
| Brand | Hormann |
| Model Name | 4511728 (HSE1 868-BS) |
| Color | Black |
| Connectivity Technology | Radio Frequency (BiSecur) |
| Special Features | Ergonomic design |
| Compatible Devices | Garage door operators, gate operators (Hormann BiSecur systems) |
| Battery Composition | Lithium Metal |
| Rechargeable Battery | No |
| Number of Buttons | 1 |
| Controller Type | Button Control |
| Maximum Range | 30 Meters |
| Country of Origin | Germany |
Warranty Information
Specific warranty information for the Hormann HSE1 868-BS BiSecur Handheld Transmitter is not provided in the product details. Please refer to the warranty documentation included with your purchase or contact Hormann customer service for details regarding warranty coverage and terms.
Customer Support
For technical assistance, troubleshooting beyond this manual, or inquiries about your Hormann HSE1 868-BS BiSecur Handheld Transmitter, please contact Hormann customer support. Contact details can typically be found on the manufacturer's official website or on the product packaging.
