ZING Green at Work Sign Instruction Manual

Product Overview

The ZING 0034-4PK Green at Work Sign is designed to promote water conservation in the workplace by encouraging the tight shut-off of water taps. This sign is part of the Green at Work initiative, emphasizing sustainable practices.

Manufactured from 70% post-consumer recycled plastic, this product supports environmental sustainability and is UL Validated for its recycled content, aligning with various green building standards such as LEED.

Image 1: Front view of the ZING Green at Work Sign, displaying the message "Shut Off Water Taps Tightly" and indicating it's made from recycled plastic.

What's Included

• Four (4) ZING 0034-4PK Green at Work Signs
• Self-adhesive pads for mounting (pre-applied or included)

Setup and Installation

The ZING Green at Work Sign is designed for easy installation using the included self-adhesive pads. Follow these steps for optimal placement and adhesion:

1. Select Location: Choose a visible, flat, and clean surface near water taps or in areas where water conservation is encouraged. Ensure the surface is dry and free of dust, grease, or debris.
2. Prepare Surface: Clean the chosen surface thoroughly with a mild cleaner and allow it to dry completely.
3. Apply Sign: Remove the protective backing from the self-adhesive pads on the back of the sign. Carefully position the sign on the prepared surface.
4. Press Firmly: Once positioned, press the sign firmly against the surface for at least 30 seconds to ensure strong adhesion.

For best results, avoid repositioning the sign after initial application.

Operating Principle

This sign operates as a visual reminder and educational tool. Its primary function is to encourage individuals to consciously shut off water taps tightly, thereby contributing to water conservation efforts within the facility. The clear, concise message aims to promote responsible water usage habits.

Maintenance and Care

To ensure the longevity and readability of your ZING Green at Work Sign, follow these simple maintenance guidelines:

• Cleaning: Wipe the sign periodically with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners or harsh chemicals, as these may damage the sign's surface or fade the print.
• Inspection: Regularly check the sign for any signs of damage or wear. Ensure it remains securely adhered to its surface.

Troubleshooting

As a passive informational sign, troubleshooting is generally limited to its visibility and adhesion.

• Sign Not Visible: If the sign is not effectively conveying its message, consider relocating it to a more prominent or eye-level position. Ensure it is not obstructed by other objects.
• Sign Not Adhering: If the sign begins to peel or fall, the surface may not have been adequately cleaned or prepared during installation. Re-clean the surface thoroughly and reapply with new adhesive pads if necessary. Ensure the surface is smooth and non-porous.

Product Specifications

Image 2: Certification mark indicating UL Validation for ZING Green@Work environmental signs, confirming a minimum of 70% recycled content.

Warranty and Support

Specific warranty details for the ZING 0034-4PK Green at Work Sign are not provided in this manual. For information regarding product warranty, returns, or technical support, please contact Zing Green Products directly or refer to their official website.

You can typically find contact information on the manufacturer's packaging or by visiting the ZING Store on Amazon or their corporate website.