Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Scosche BT102 Rechargeable Bluetooth Wireless Earbuds. Designed for wireless audio streaming, these earbuds feature an in-line microphone, music control buttons, and noise-isolating ear cushions, offering a seamless audio experience. The IPX4 rating ensures protection against sweat and splashes, making them suitable for various activities.
Package Contents
Please verify that all items are present in your package:
- Scosche BT102 Bluetooth Wireless Earbuds
- Micro USB Charging Cable
- Multiple Sizes of Noise Isolating Ear Cushions
- Lapel Clip
Product Overview
Familiarize yourself with the components of your Scosche BT102 earbuds.
Figure 1: Scosche BT102 Bluetooth Wireless Earbuds. This image displays the overall design of the earbuds, featuring two black earpieces connected by a cable, with a small rectangular control module located on the cable.
Figure 2: In-line Control Module and Features. This image highlights the control module with its integrated microphone and music control buttons (+, call, -). It also shows the Bluetooth 4.2 logo and an included lapel clip for securing the cable.
Figure 3: IPX4 Water Resistance. This image illustrates the earbuds' IPX4 rating, showing water droplets on the earpieces, signifying their resistance to sweat and splashes.
Charging the Earbuds
Before first use, fully charge your earbuds. A full charge takes approximately 3 hours.
- Locate the Micro USB charging port on the in-line control module.
- Connect the Micro USB end of the charging cable to the earbuds and the USB-A end to a compatible USB power source (e.g., wall adapter, computer USB port).
- The LED indicator on the control module will flash red when the battery is low and turn solid red to indicate that the battery is charging.
- Once fully charged, the LED indicator will turn solid blue. Disconnect the charging cable.
Setup: Bluetooth Pairing
Follow these steps to pair your Scosche BT102 earbuds with your Bluetooth-enabled device.
- Power On: Press and hold the multi-function button (usually the center button on the in-line control) until the LED indicator begins to flash repeatedly blue. This indicates the earbuds are in pairing mode.
- Activate Bluetooth: On your smartphone or other audio device, enable Bluetooth.
- Search for Devices: Scan for available Bluetooth devices. You should see "Scosche BT102" or a similar name appear in the list.
- Connect: Select "Scosche BT102" from the list to initiate pairing.
- Confirmation: Once successfully paired, the LED indicator will flash blue once every second. The earbuds are now ready for use.
The earbuds utilize Bluetooth 4.2 technology and can maintain a stable connection up to 33 feet (10 meters) from your device.
Operating Instructions
The in-line control module provides easy access to music playback and call management.
Music Control:
- Play/Pause: Press the multi-function button once.
- Next Track: Press and hold the '+' button.
- Previous Track: Press and hold the '-' button.
- Volume Up: Short press the '+' button.
- Volume Down: Short press the '-' button.
Call Management:
- Answer/End Call: Press the multi-function button once during an incoming call or active call.
- Reject Call: Press and hold the multi-function button during an incoming call.
- Redial Last Number: Double-press the multi-function button when not on a call.
The integrated microphone allows for hands-free calling.
Maintenance and Care
Proper care will extend the lifespan of your earbuds.
- Cleaning: Use a soft, dry cloth to wipe the earbuds. For ear cushions, remove them and clean with a mild soap solution, then rinse and dry thoroughly before reattaching.
- Water Resistance: The earbuds are IPX4 rated, meaning they are resistant to sweat and splashes. Do not submerge them in water or expose them to heavy rain.
- Storage: Store the earbuds in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery: To preserve battery life, charge the earbuds regularly, even if not in frequent use. Avoid fully depleting the battery for extended periods.
Troubleshooting
If you encounter issues with your earbuds, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Earbuds do not power on. | Low battery. | Charge the earbuds for 3 hours. |
| Cannot pair with device. | Earbuds not in pairing mode; Bluetooth off on device; device too far. | Ensure earbuds are flashing blue rapidly (pairing mode). Turn Bluetooth on your device. Move device within 33 feet (10 meters) of earbuds. Forget previous pairings on your device and try again. |
| No sound or distorted sound. | Volume too low; earbuds not connected; audio source issue. | Increase volume on both earbuds and connected device. Re-pair the earbuds. Check if the audio is playing correctly from the source device. |
| Battery drains quickly. | Normal wear and tear; continuous high volume use. | Battery life is approximately 3 hours of continuous use. Ensure earbuds are fully charged. Reduce volume if possible. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | BT102-XWSP2 |
| Connectivity Technology | Wireless |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Version | 4.2 |
| Bluetooth Range | 33 Feet (10 meters) |
| Battery Life | 3 Hours (playback) |
| Charging Time | 3 Hours |
| Water Resistance Level | IPX4 (Sweat and Splash Resistant) |
| Item Weight | 1.44 ounces (approx. 0.09 pounds) |
| Special Features | Microphone Included, Noise Isolation |
| Headphones Jack | Micro USB (for charging) |
| Ear Placement | In Ear |
Warranty and Support
Your Scosche BT102 earbuds come with a 3-year warranty, protecting against defects in materials and workmanship under normal use.
For technical support, warranty claims, or further assistance, please contact Scosche customer service. Visit the official Scosche website for contact information and additional resources.
Scosche Official Website: www.scosche.com
