Atomic Beam 11217

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Atomic Beam LED Flashlight User Manual

Model: 11217

Introduction

Thank you for choosing the Atomic Beam LED Flashlight. This tactical flashlight is designed for durability and powerful illumination, making it an essential tool for various situations, from everyday use to emergencies. This manual provides detailed instructions to help you get the most out of your new flashlight.

Atomic Beam LED Flashlight

Figure 1: Atomic Beam LED Flashlight

Product Features

  • Ultra-Bright Illumination: Equipped with powerful LED bulbs for superior brightness compared to ordinary flashlights.
  • Adjustable Focus: Easily switch between a concentrated spotlight and a wide floodlight beam.
  • Multiple Beam Modes: Features 5 distinct modes: High, Medium, Low, S.O.S., and Strobe for versatile use.
  • Durable Construction: Made with tough-grade aluminum casing, designed to be weather-resistant (not waterproof) and shock-resistant.
  • Compact and Lightweight: Easy to carry and store, ideal for emergency kits, camping, and daily tasks.
  • Flexible Power Options: Operates on 3 AAA batteries or 1 rechargeable 3.7V lithium-ion battery (batteries not included).
Key features of the Atomic Beam Tactical Flashlight

Figure 2: Diagram highlighting key features like aluminum casing, push switch, and beam modes.

Setup

Battery Installation

  1. Unscrew the tail cap of the flashlight by turning it counter-clockwise.
  2. Insert 3 AAA batteries into the battery holder, ensuring correct polarity (+/-) as indicated inside the holder. Alternatively, insert one 3.7V rechargeable lithium-ion battery directly into the flashlight body with the positive (+) end facing the head of the flashlight.
  3. Screw the tail cap back on clockwise until it is securely tightened.

Operating Instructions

Power On/Off

Press the rubberized button located on the tail cap to turn the flashlight ON or OFF.

Changing Beam Modes

With the flashlight ON, lightly press the tail cap button repeatedly to cycle through the 5 available beam modes:

  • High: Maximum brightness for powerful illumination.
  • Medium: Moderate brightness for general use.
  • Low: Reduced brightness for extended battery life or close-up tasks.
  • S.O.S.: Flashes the Morse code signal for distress (three short, three long, three short).
  • Strobe: Rapid flashing light for signaling or disorientation.

Adjusting Focus (Spotlight to Floodlight)

To adjust the beam focus, gently slide the head of the flashlight forward or backward. Sliding it forward will narrow the beam into a concentrated spotlight, while sliding it backward will widen it into a broad floodlight.

Man demonstrating the brightness of the Atomic Beam Flashlight

Figure 3: User demonstrating the flashlight's bright output.

Maintenance

  • Cleaning: Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Battery Care: Remove batteries if the flashlight will not be used for an extended period to prevent leakage and damage.
  • Storage: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Flashlight does not turn on.Dead or incorrectly installed batteries.Replace batteries or ensure correct polarity.
Light is dim or flickers.Low battery power or loose connections.Replace batteries. Ensure tail cap and head are tightly screwed.
Cannot change beam modes.Button not fully pressed or internal issue.Ensure full press of the button. If issue persists, contact support.

Specifications

AttributeDetail
BrandAtomic Beam
Model Number11217
Light Source TypeLED
Brightness5000 Lumens / 5000 Lux
Power SourceBattery Powered
Battery Type3 AAA batteries or 1 rechargeable 3.7V Lithium Ion battery (not included)
MaterialMetal (Tough-Grade Aluminum Casing)
Special FeaturesAdjustable, Durable, Lightweight
Water Resistance LevelWater Resistant (not waterproof)
Item Weight0.32 ounces
Product Dimensions9"D x 6"W x 2"H

Safety Information

  • Do not look directly into the LED light when it is on, as it can cause temporary vision impairment.
  • Keep out of reach of children.
  • Do not mix old and new batteries, or different types of batteries.
  • Dispose of batteries properly according to local regulations.

Warranty and Support

This product comes with a manufacturer's warranty. For specific warranty details or technical support, please refer to the product packaging or contact Atomic Beam customer service. Keep your purchase receipt for warranty claims.

© 2025 Atomic Beam. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.