GSW WR-GV

Download PDF
Contents

GSW WR-GV Copper Gas Valve Instruction Manual

Model: WR-GV | Brand: GSW

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of the GSW WR-GV Copper Gas Valve. This valve is designed for use in commercial wok range applications. Please read this manual thoroughly before installation or use and retain it for future reference.

Important: Installation and service must be performed by a qualified installer, service agency, or gas supplier.

2. Safety Information

Adherence to safety guidelines is paramount when working with gas appliances. Failure to follow these instructions could result in property damage, personal injury, or death.

  • Always ensure the gas supply is turned off before attempting any installation, maintenance, or repair.
  • Verify all connections are properly sealed to prevent gas leaks. Use appropriate leak detection methods (e.g., soap solution).
  • Do not use open flames to check for gas leaks.
  • Ensure adequate ventilation in the work area.
  • Comply with all local and national codes and regulations for gas appliance installation.
  • If you smell gas, immediately turn off the main gas supply, open windows and doors, and evacuate the area. Do not operate electrical switches or phones. Contact your gas supplier or fire department.

3. Product Overview

The GSW WR-GV is a durable copper gas valve designed for precise control of gas flow to commercial wok ranges. It features a robust construction and a user-friendly handle for operation.

GSW WR-GV Copper Gas Valve with Handle, front view.

This image displays the GSW WR-GV Copper Gas Valve with its handle, viewed from the front. The valve body is copper-toned, and the handle is silver-toned with 'GSW' branding.

Key Features:

  • Material: Copper construction for durability and corrosion resistance.
  • Connections: 1/2" NPT inlet and outlet for standard gas line compatibility.
  • Pressure Rating: Designed for a maximum operating pressure of 0.5 PSI.
  • CSA Approved: Certified to meet safety and performance standards.
  • Handle: Ergonomic handle for easy gas flow control.

4. Installation Instructions

Installation of the GSW WR-GV gas valve should only be performed by a certified professional to ensure safety and compliance with all applicable codes.

Required Tools and Materials:

  • Pipe wrench or adjustable wrench
  • Pipe thread sealant (gas-rated)
  • Leak detection solution
  • Appropriate personal protective equipment (PPE)

Installation Steps:

  1. Turn Off Gas Supply: Locate the main gas shut-off valve and turn off the gas supply to the appliance or building.
  2. Prepare Connections: Ensure the gas lines are clean and free of debris. Apply a suitable gas-rated pipe thread sealant to the male NPT threads of the valve.
  3. Connect Valve: Thread the GSW WR-GV valve onto the gas supply line and then connect the appliance's gas line to the valve's outlet. Tighten connections securely with a pipe wrench, but do not overtighten.
  4. Check for Leaks: Slowly turn on the main gas supply. Apply a leak detection solution (e.g., soapy water) to all new connections. Bubbles indicate a gas leak. If a leak is detected, turn off the gas supply immediately, tighten the connection, and re-test. Repeat until no leaks are present.
  5. Verify Operation: Once all connections are secure and leak-free, proceed to the operating instructions.
Close-up view of the GSW WR-GV Copper Gas Valve body.

A detailed close-up of the copper valve body, highlighting the threaded NPT connections and markings such as '1/2 PSI' and 'CSA' certification.

Commercial wok range with gas valves installed.

An image showing a commercial kitchen setup with multiple wok ranges, demonstrating where gas valves like the GSW WR-GV would be installed to control gas flow to the burners.

5. Operating Instructions

The GSW WR-GV gas valve is designed for simple on/off operation using its handle.

To Turn Gas ON:

Rotate the handle 90 degrees until it is aligned with the direction of the gas flow (typically parallel to the gas pipe). This position allows gas to flow through the valve to the appliance.

To Turn Gas OFF:

Rotate the handle 90 degrees until it is perpendicular to the direction of the gas flow. This position shuts off the gas supply through the valve.

GSW WR-GV Copper Gas Valve handle indicating 90-degree turn for operation.

This image illustrates the 90-degree rotation required for the GSW WR-GV gas valve handle to switch between ON and OFF positions. An arrow indicates the direction of movement.

6. Maintenance

Regular inspection and maintenance can extend the lifespan of your GSW WR-GV gas valve and ensure safe operation.

  • Periodic Inspection: Visually inspect the valve and connections regularly for any signs of wear, corrosion, or damage.
  • Leak Checks: Periodically perform a leak check on all gas connections using a leak detection solution.
  • Handle Operation: Ensure the handle turns smoothly and fully between the ON and OFF positions. If the handle becomes stiff or difficult to turn, do not force it. Contact a qualified technician for inspection.
  • Cleaning: Keep the exterior of the valve clean and free from grease or debris. Use a damp cloth for cleaning; avoid harsh chemicals.
  • Professional Service: Any internal issues or significant damage should be addressed by a qualified gas technician. Do not attempt to disassemble the valve yourself.

7. Troubleshooting

This section addresses common issues you might encounter with your gas valve.

Issue: Gas Leak Detected

  • Symptom: Smell of gas, bubbling when leak detection solution is applied to connections.
  • Action: Immediately turn off the main gas supply. Ensure the area is ventilated. Re-tighten connections. If the leak persists, contact a qualified gas technician immediately. Do not use the appliance until the leak is resolved.

Issue: Valve Handle is Stiff or Stuck

  • Symptom: Difficulty rotating the valve handle between ON and OFF positions.
  • Action: Do not force the handle. Forcing it can damage the valve or cause a leak. Contact a qualified gas technician for inspection and potential replacement.

Issue: No Gas Flow to Appliance

  • Symptom: Appliance does not receive gas, even when the valve handle is in the ON position.
  • Action: Verify that the main gas supply to the building is on. Check that the valve handle is fully in the ON position. If the issue persists, there may be an obstruction or internal valve failure. Contact a qualified gas technician.

8. Specifications

Detailed technical specifications for the GSW WR-GV Copper Gas Valve.

Dimensions of the GSW WR-GV Copper Gas Valve.

A diagram showing the key dimensions of the GSW WR-GV Copper Gas Valve, including the handle length (5-1/4 inches), overall height (2-1/8 inches), and connection spacing (13/16 inches).

SpecificationDetail
Model NumberWR-GV
BrandGSW
MaterialCopper
Exterior FinishCopper
Inlet Connection Size0.5 Inches
Inlet Connection TypeNational Pipe Tapered (NPT)
Outlet Connection Size0.5 Inches
Outlet Connection TypeNPS
Maximum Operating Pressure0.5 PSI (Pound per Square Inch)
Number of Ports2
Specification MetCSA Approved, CSA Certified
Part NumberWR-GV/GVH
Item Weight1.02 pounds
Package Dimensions5.67 x 5.55 x 1.42 inches
UPC737079602964
CSA Certified logo.

The CSA (Canadian Standards Association) certification logo, indicating that the product meets applicable safety and performance standards.

9. Warranty and Support

For information regarding warranty coverage, please refer to the product packaging or contact GSW directly. GSW is committed to providing quality products and support.

Contact Information:

For technical assistance, replacement parts, or warranty inquiries, please visit the official GSW website or contact your authorized dealer.

GSW Brand Store: Visit GSW Store on Amazon

© 2025 GSW. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.