1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Titan Wagner Speeflo 550-240 Whip Hose. Please read these instructions carefully before use to ensure safe and efficient operation and to prolong the life of your equipment. This whip hose is designed as an accessory for airless paint sprayers, providing increased flexibility and reduced fatigue during spraying operations.
2. Product Overview
The Titan Wagner Speeflo 550-240 Whip Hose is a genuine OEM accessory designed to connect to your main airless sprayer hose. It features 1/4" NPSM (Female x Male) ends and is rated for a maximum pressure of 3300 PSI. Its 3-foot length and 3/16" diameter provide enhanced maneuverability and reduce strain on the main hose, making it easier to handle the spray gun.
Image 1: The Titan Wagner Speeflo 550-240 Whip Hose, featuring its red urethane construction and metal fittings with spring guards at both ends.
3. Setup
Follow these steps to properly connect the whip hose to your airless paint sprayer system:
- Safety First: Always ensure your airless paint sprayer is depressurized and disconnected from power before attempting any connections or disconnections.
- Inspect Connections: Verify that the main airless hose and the spray gun fittings are clean and free of debris.
- Connect to Main Hose: Attach the female end of the whip hose (with the swivel nut) to the male fitting on your main airless sprayer hose. Tighten securely with a wrench, but do not overtighten.
- Connect to Spray Gun: Attach the male end of the whip hose to the female fitting on your airless spray gun. Tighten securely with a wrench.
- Check Compatibility: This whip hose features 1/4" NPSM fittings. Ensure your main hose and spray gun also use 1/4" NPSM fittings for proper compatibility. Note that this hose may not be compatible with all Wagner models, such as the Wagner Control Pro 170, which may use different fitting sizes. Always consult your specific sprayer's manual for fitting requirements.
- Pressure Test: After connecting, slowly pressurize the system and check for any leaks at the connections. Address any leaks immediately by depressurizing and re-tightening.
4. Operating Instructions
The whip hose is designed to enhance the flexibility and reach of your airless spray gun. Once properly installed, operate your airless sprayer according to its manufacturer's instructions. The whip hose will provide a more agile connection between the main hose and the gun, reducing the stiffness and weight at the gun handle. Always maintain a firm grip on the spray gun and be aware of the hose's movement.
- Do not exceed the maximum pressure rating of 3300 PSI for this whip hose.
- Avoid kinking or sharply bending the hose during operation, as this can damage the hose and restrict flow.
- Keep the hose away from sharp objects, hot surfaces, and moving parts.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your whip hose:
- Cleaning: After each use, flush the whip hose thoroughly with appropriate cleaning solvents (e.g., water for latex paints, mineral spirits for oil-based paints) as per your paint sprayer's cleaning procedure. Ensure all paint residue is removed from the interior.
- Inspection: Regularly inspect the entire length of the hose for cuts, abrasions, bulges, or other signs of wear or damage. Check the fittings for cracks, corrosion, or stripped threads. Replace the hose immediately if any damage is found.
- Storage: Store the whip hose in a cool, dry place, away from direct sunlight, extreme temperatures, and harsh chemicals. Coil the hose loosely to prevent kinking.
6. Troubleshooting
If you encounter issues with your whip hose, consider the following:
- Leaks at Connections: Ensure fittings are clean and tightened securely. Check for damaged O-rings or threads. Depressurize the system before attempting to tighten or inspect.
- Reduced Flow/Pressure: Check for kinks in the hose. Ensure the hose is thoroughly cleaned and free of dried paint or obstructions. Verify that the main sprayer system is functioning correctly.
- Hose Damage: Any visible damage such as cuts, bulges, or severe abrasions indicates the hose should be replaced immediately to prevent rupture under pressure.
For issues related to the airless sprayer itself, refer to the sprayer's instruction manual.
7. Specifications
| Specification | Detail |
|---|---|
| Brand | Titan |
| Model Number | 550-240 |
| Part Number | 550-240 (also 0291004) |
| Material | Solid Urethane |
| Item Length | 3 Feet (36 inches) |
| Inside Diameter | 3/16 inches |
| Outside Diameter | 0.19 Inches |
| Nominal Wall Thickness | 0.12 inches |
| Maximum Pressure | 3300 PSI (Pound per Square Inch) |
| Fittings | 1/4" NPSM (Female x Male) |
| Item Weight | 11.2 ounces |
| UPC | 735548957454 |
8. Warranty and Support
For specific warranty information regarding your Titan Wagner Speeflo 550-240 Whip Hose, please refer to the documentation provided with your original purchase or contact Titan customer support directly. Warranty terms typically cover manufacturing defects for a specified period. Keep your proof of purchase for any warranty claims.
For technical assistance or further inquiries, please contact the manufacturer or your authorized dealer.
