Snow Joe SJ615E Electric Walk-Behind Single-Stage Snow Blower Instruction Manual

1. Introduction

The Snow Joe SJ615E Electric Walk-Behind Single-Stage Snow Blower is designed for efficient snow removal on mid-sized driveways and walkways. This electric unit combines powerful performance with user-friendly features, eliminating the need for gas, oil, or complex tune-ups. Its compact design and lightweight construction make it easy to maneuver and store.

2. Important Safety Information

WARNING: Always keep hands and other body parts away from the auger while the machine is in operation. Wear appropriate protective clothing, including gloves and eye protection. Be aware of the machine's weight and handle it with care to prevent instability. Always unplug the machine before performing any maintenance or cleaning.

Read and understand all safety instructions in this manual before operating the snow blower. Failure to follow these instructions can result in serious injury.

3. Product Features

• Ideal Use: For quick snow pickups on mid-sized driveways and walkways.
• Maintenance-Free: No gas, oil, or tune-ups required, ensuring effortless starting and maintenance.
• Powerful Motor: Equipped with an 11-amp motor capable of moving up to 440 lbs (200 kg) of snow per minute.
• Durable Auger: Features a 2-blade cold- and abrasion-resistant plastic auger that cuts a path 15 inches (38 cm) wide and 8 inches (20 cm) deep with each pass.
• Adjustable Chute: 180° directional chute allows precise control over snow discharge, throwing snow up to 20 feet (6 meters).
• Scraper Bar: Plastic scraper bar at the base clears snow right to the ground without damaging surfaces.

4. Setup and Assembly

The Snow Joe SJ615E is designed for easy assembly. Follow these general steps:

1. Handle Assembly: Attach the upper and lower handles securely using the provided hardware. Ensure all bolts and knobs are tightened.
2. Chute Attachment: Secure the discharge chute to the main unit. The 180° adjustable chute allows you to direct snow as needed.
3. Cord Management: Ensure the power cord is properly routed and secured to prevent it from interfering with operation or becoming damaged. Use a suitable outdoor extension cord (refer to specifications for gauge recommendations based on length).

5. Operating Instructions

Before starting, ensure the area to be cleared is free of debris that could be thrown by the auger. Wear appropriate safety gear.

1. Starting the Unit: Connect the snow blower to a suitable outdoor extension cord. Press the safety button and then squeeze the trigger to start the motor.
2. Clearing Snow: Push the snow blower forward at a steady pace. For deeper or heavier snow, take smaller passes to avoid overloading the unit. The 15-inch clearing width and 8-inch clearing depth are designed for efficient removal.
3. Directing Snow: Use the crank handle to adjust the 180° directional chute, allowing you to throw snow up to 20 feet away from your clearing path.
4. Surface Protection: The plastic scraper bar ensures you can clear snow down to the ground without damaging delicate surfaces like decks or pavers.

6. Maintenance

Regular maintenance ensures optimal performance and extends the life of your snow blower.

• Always Unplug: Disconnect the power cord before performing any inspection, cleaning, or maintenance.
• Clean After Use: After each use, clear any snow or ice buildup from the auger housing and discharge chute. Use a non-abrasive tool to prevent damage.
• Inspect for Damage: Periodically check the auger blades, scraper bar, and power cord for any signs of wear or damage. Replace worn or damaged parts immediately.
• Storage: Store the snow blower in a dry, covered area when not in use. The folding handle allows for compact storage.

7. Troubleshooting

If your Snow Joe SJ615E encounters issues, refer to these common troubleshooting tips:

• Unit Does Not Start: Ensure the power cord is securely plugged into a working outlet and the unit. Check if the safety button is pressed before squeezing the trigger. Verify the circuit breaker has not tripped.
• Snow Not Discharging: Unplug the unit immediately. Check the auger housing and discharge chute for clogs. Carefully remove any obstructions using a clearing tool, never your hands.
• Reduced Performance: Ensure you are not attempting to clear snow deeper or heavier than the unit's capacity in a single pass. Take smaller, slower passes. Check for worn auger blades or a damaged scraper bar.

8. Specifications

9. Warranty

The Snow Joe SJ615E Electric Walk-Behind Single-Stage Snow Blower is backed by Snow Joe's full two-year warranty. Please refer to the warranty card included with your product for complete details and registration information.

10. Support

For technical assistance, replacement parts, or customer service, please visit the official Snow Joe website or contact their customer support line. Have your model number (SJ615E) and purchase date ready when contacting support.

Online Support: www.snowjoe.com

Customer Service: Refer to your product manual or the Snow Joe website for the most current contact information.