STORKCRAFT 04526-519
Contents
Graco Solano 4-in-1 Convertible Crib Instruction Manual
Model: 04526-519
Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Graco Solano 4-in-1 Convertible Crib. Please read this manual thoroughly before assembly and use to ensure safe and proper operation. This crib is designed to convert from a crib to a toddler bed, day bed, and full-size bed, adapting to your child's growth.
Safety Information
WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death.
- Always ensure all bolts and screws are securely tightened. Do not overtighten.
- Do not use this crib if any parts are missing, damaged, or broken. Contact the manufacturer for replacement parts.
- Do not substitute parts. Use only manufacturer-supplied parts.
- Keep all small parts and assembly hardware out of reach of children.
- Do not place the crib near windows where cords from blinds or drapes could strangle a child.
- Do not place items with a string or cord around a child's neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or attach strings to toys.
- The mattress used with this crib must be at least 5 inches thick and fit snugly without gaps.
- Discontinue use of the crib when the child begins to climb out or reaches 35 inches (89 cm) in height.
- Regularly check the crib for loose hardware, worn parts, or sharp edges.
Package Contents
Before beginning assembly, ensure all components are present and undamaged. Refer to the included parts list for identification.
- Crib Headboard and Footboard
- Side Rails (2)
- Mattress Support
- Hardware Pack (screws, bolts, barrel nuts, Allen wrench)
- Premium Mattress

Image: Graco Solano 4-in-1 Convertible Crib with included mattress, showing the main components.
Setup and Assembly
Assembly requires two adults and a Phillips head screwdriver (not included). Follow these steps carefully.
- Step 1: Attach Side Rails to Headboard. Align the holes on the side rails with the pre-drilled holes on the headboard. Insert the appropriate bolts and tighten with the provided Allen wrench. Ensure the Graco logo on the side rail faces outwards.

Image: Close-up of crib assembly, showing the connection point of a side rail to the headboard.
- Step 2: Attach Footboard. Once both side rails are secured to the headboard, attach the footboard in the same manner, ensuring all connections are firm.
- Step 3: Install Mattress Support. Position the mattress support within the crib frame. The crib offers three adjustable mattress heights. Select the desired height and secure the mattress support using the provided hardware. For infants, the highest position is recommended for easier access.

Image: Crib interior showing the mattress support installed at a higher setting, suitable for infants.
- Step 4: Place Mattress. Carefully place the included premium mattress onto the mattress support. Ensure it fits snugly without any gaps around the edges.

Image: Crib with the white mattress placed inside, ready for use.
Operating (Conversion)
The Graco Solano crib is designed to convert into a toddler bed, day bed, and full-size bed. Conversion kits (sold separately for toddler and full-size beds) may be required.
Converting to a Toddler Bed
To convert to a toddler bed, remove the front side rail and replace it with a toddler guard rail (sold separately). Ensure the mattress is at the lowest setting for safety.
Converting to a Day Bed
To convert to a day bed, simply remove the front side rail. The mattress should be at the lowest setting.
Converting to a Full-Size Bed
To convert to a full-size bed, remove both side rails and the mattress support. Attach full-size bed rails (sold separately) to the headboard and footboard. A standard full-size mattress and box spring (not included) will be required.

Image: The Graco Solano crib frame configured as a full-size bed, demonstrating its versatility.
Maintenance
- Cleaning: Clean the crib regularly with a damp cloth and mild soap. Do not use abrasive cleaners or strong detergents.
- Inspections: Periodically check all screws, bolts, and fasteners to ensure they are tight. Do not overtighten. Inspect for any signs of damage, splinters, or loose parts.
- Storage: If storing the crib, disassemble it carefully and store all parts in a dry, temperate environment to prevent warping or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Crib feels wobbly or unstable. | Loose hardware. | Check and tighten all screws and bolts. Do not overtighten. |
| Mattress does not fit snugly. | Incorrect mattress size or improper installation of mattress support. | Ensure the mattress is the correct size (standard crib mattress). Re-check mattress support installation. |
| Parts missing or damaged upon arrival. | Shipping damage or packaging error. | Do not assemble. Contact customer support immediately for replacement parts. |
Specifications
- Model Number: 04526-519
- Product Dimensions: 142.24 x 76.2 x 105.41 cm (56 x 30 x 41.5 inches)
- Product Weight: 22.68 kg (50 pounds)
- Maximum Recommended Weight: 50 pounds
- Material: Wood
- Finish: Espresso
- Included Components: 4-in-1 Convertible Crib, Mattress
- Assembly Required: Yes
Warranty and Support
For warranty information, replacement parts, or further assistance, please contact STORKCRAFT customer support. Refer to the contact information provided with your product packaging or visit the official STORKCRAFT website.
Online Support: www.storkcraft.com/support
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.