1. Introduction
Thank you for choosing the Superfish Pond Eco Plus RC 15000 electronic filter pump. This high-quality, energy-efficient pump is designed for use in koi and fish ponds, offering reliable water circulation and filtration. It features remote control functionality for convenient flow regulation and includes run-dry protection for enhanced durability. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance of your pump.
The image displays the Superfish Pond Eco Plus RC 15000 electronic filter pump, packaged in its retail box. The box highlights key features such as energy saving, very low power consumption, and the inclusion of a remote control. The pump itself is visible, along with its remote, emphasizing its design for pond filtration.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage:
- Ensure the pump is always connected to a grounded outlet.
- Do not operate the pump if the power cord or plug is damaged.
- Never handle the pump or power cord with wet hands.
- Disconnect the pump from the power supply before performing any maintenance or cleaning.
- Keep children and pets away from the pond area and electrical components.
- The pump is suitable for both submerged and dry-mounted use. Follow specific installation guidelines for each method.
- Do not use the pump for purposes other than those specified in this manual.
3. Package Contents
Please check that all items are present in the package:
- Superfish Pond Eco Plus RC 15000 Pump Unit
- Remote Control
- Power Cable
- Hose Connectors/Fittings
- User Manual (this document)
4. Setup
4.1 Placement
The Pond Eco Plus RC 15000 pump can be installed either submerged in the pond or dry-mounted outside the pond.
- Submerged Installation: Place the pump on a stable, level surface at the deepest part of the pond, away from heavy sludge accumulation. Ensure it is fully submerged in water.
- Dry-Mounted Installation: Position the pump on a firm, level surface outside the pond, ensuring it is below the water level to allow for gravity-fed water intake. Protect the pump from direct sunlight and harsh weather conditions.
4.2 Connections
- Hose Connection: Attach the appropriate hose connectors to the pump's inlet and outlet ports. Secure hoses with clamps to prevent leaks.
- Electrical Connection: Connect the power cable to the pump. Ensure the power outlet is suitable for outdoor use, grounded, and protected by a Residual Current Device (RCD). Do not plug the pump into the power supply until all other connections are secure and the pump is correctly positioned.
5. Operating Instructions
Once the pump is installed and connected, it is ready for operation.
- Power On: Plug the pump into the electrical outlet. The pump will start automatically.
- Remote Control Usage: Use the provided remote control to adjust the pump's flow rate. Refer to the remote control's specific instructions for detailed button functions (e.g., increase/decrease flow, on/off).
- Run Dry Protection: The pump is equipped with a run-dry protection feature. If the water level drops too low or the pump runs without water, it will automatically shut off to prevent damage. The pump will restart once sufficient water is detected.
6. Maintenance
Regular maintenance ensures the longevity and efficiency of your pump.
- Cleaning the Impeller: Periodically disconnect the pump from power and remove the pump housing to access and clean the impeller. Remove any debris, algae, or calcium buildup.
- Filter Cleaning: If your setup includes an external filter, ensure it is cleaned regularly according to its own manual. A clogged filter can reduce pump performance.
- Winterization: In freezing conditions, remove the pump from the pond, clean it thoroughly, and store it in a frost-free location. Do not allow the pump to freeze with water inside.
7. Troubleshooting
If you encounter issues with your pump, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power supply; Impeller jammed; Run-dry protection activated | Check power connection and RCD; Clean impeller; Ensure pump is submerged in water. |
| Reduced flow rate | Clogged intake/impeller; Kinked hose; Remote control setting | Clean intake and impeller; Straighten hose; Adjust flow rate with remote control. |
| Pump stops intermittently | Run-dry protection activated; Overheating | Check water level; Ensure proper ventilation (for dry-mounted); Clean pump. |
8. Specifications
Key technical specifications for the Superfish Pond Eco Plus RC 15000 pump:
| Feature | Detail |
|---|---|
| Brand | Superfish |
| Model Number | 676198 |
| Item Weight | 0.2 Kilograms (7 ounces) |
| Product Dimensions (LxWxH) | 4.33 x 4.33 x 4.33 inches |
| Style | Submersible |
| Control | Remote Controlled Electronic |
| Special Feature | Run Dry Protection |
9. Warranty and Support
The Superfish Pond Eco Plus RC 15000 pump comes with a 2-year warranty. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your Superfish retailer or visit the official Superfish website for contact information.
