eXuby Diamond Tip Record Player Needle (3-Pack) Instruction Manual

Introduction

This manual provides instructions for the installation, use, and maintenance of your eXuby Diamond Tip Record Player Needle 3-Pack. Designed for superior sound quality and extended record life, these diamond-tipped needles offer a durable replacement for standard record player styluses.

Image: The eXuby Diamond Tip Record Player Needle, emphasizing its benefits for sound quality, record preservation, and durability.

Image: Packaging of the eXuby 3-pack Premium Diamond Head Stylus Needle replacement.

Compatibility

Before installation, it is essential to verify compatibility with your existing record player stylus. Please compare the dimensions of your current needle with the specifications provided below and visually inspect against the product images.

• Needle Dimensions: Length: 18mm, Front Width: 9mm, Rear Width: 10mm, Front Height: 3mm, Rear Height: 4mm.

This needle is compatible with many record players from brands such as:

• Crosley
• Jensen
• Pyle
• Philco
• Emerson
• Zenith
• Detrola
• ION
• Leetac
• And many more.

Image: Logos of various record player brands compatible with the eXuby diamond tip needle.

Installation

The eXuby Diamond Tip Needle is designed for quick and easy installation without the need for special tools.

1. Power Off: Ensure your record player is powered off and unplugged before beginning installation.
2. Remove Old Needle: Gently grasp the old needle and pull it straight out from the cartridge. Avoid bending or twisting.
3. Install New Needle: Align the new eXuby diamond needle with the cartridge. Carefully push it into place until it snaps securely. Do not force the needle.
4. Verify: Double-check that the new needle is firmly seated in the cartridge.

Image: Four eXuby diamond tip record player needles, illustrating the product's design.

Operation

Once installed, your eXuby Diamond Tip Needle is ready for use. The diamond tip ensures accurate tracking and superior sound reproduction from your vinyl records.

• Always handle your records by the edges to avoid transferring oils and dirt to the playing surface.
• Gently lower the tonearm onto the record to prevent damage to both the needle and the record.
• Ensure your record player is on a stable, level surface to prevent skips and uneven wear.

Maintenance

Proper maintenance of your record player needle is crucial for preserving your vinyl collection and maintaining optimal sound quality.

• Cleaning: Periodically clean the needle tip using a soft brush designed for stylus cleaning. Brush gently from back to front.
• Replacement: The eXuby Diamond Tip Needle is designed for a lifespan of up to 1000 hours of playback. Unlike ordinary needles that dull after approximately 100 hours, the diamond tip maintains its sharpness longer.
• Record Protection: A worn or dull needle can cause irreversible damage to your records' grooves. Replace your needle promptly when you notice a decrease in sound quality or after approximately 1000 hours of use to protect your valuable vinyl.

Image: Visual comparison illustrating the extended sharpness and durability of the eXuby diamond needle compared to an ordinary needle.

Troubleshooting

If you experience issues with sound quality, consider the following:

• Distorted Sound or Skips: This can often indicate a worn needle. Check the needle for visible wear or consider replacing it if it has reached its estimated lifespan.
• Poor Tracking: Ensure the needle is correctly seated in the cartridge and that the tonearm's tracking force is set according to your record player's specifications.
• Dust and Debris: A dirty needle can affect sound quality. Clean the stylus carefully as described in the Maintenance section.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the manufacturer's official website or contact eXuby customer service directly. Contact details are typically found on the product packaging or the official eXuby website.