1. Product Overview
The PERLESMITH Full Motion TV Wall Mount (Model PSLFK1) is designed to provide a versatile and secure mounting solution for most 37-82 inch LED, LCD, Flat, and Curved TVs weighing up to 132 lbs. It features dual articulating arms, offering extensive tilt and extension capabilities, and is compatible with VESA patterns from 200x100mm to 600x400mm. This mount is engineered for optimal viewing experience and space-saving convenience.
Key Features:
- Universal Design: Fits most 37-82 Inch TVs with VESA 200X100mm to 600X400mm. Compatible with major brands like Samsung, LG, TCL, Vizio, Sony, Panasonic, Thomson, Toshiba, Sharp, Philips, JVC, and more.
- Sturdy and Safe: Constructed from high-quality steel materials with dual articulating arms, supporting TVs up to 132 lbs. Tested with up to 4x the rated weight limit for enhanced safety.
- Optimal Viewing Experience: TV bracket tilts TV up 5° and down 15° to reduce glare and eye strain. Features +/-45° swivel for flexible viewing angles.
- Space Saver: Retracts to a mere 2.8" from the wall for a low-profile look and extends up to a maximum of 16" from the wall, providing ample space underneath.
2. Package Contents
Please verify that all components are present before beginning installation:
- 1x TV wall mount
- 1x Standard mounting hardware + Wall anchors + TV lag bolts
- 1x User manual (for full details, refer to the PDF linked on the product page)
- 1x Magnetic bubble level
- 3x Cable ties
3. Setup & Installation
Follow these general steps for installation. For detailed instructions, always refer to the included user manual and consider watching the official installation videos.
- Check TV Screws: Ensure you use the correct length screws for your TV. Screws that are too short will not secure the TV, and screws that are too long can damage the TV.
- Attach Brackets to TV: Secure the TV brackets to the back of your television using the provided hardware. Ensure VESA compatibility (Max: 600x400mm, Min: 200x100mm).
- Mount Arm Assembly on Wall: Locate suitable wall studs (16-inch spacing recommended for wood studs) or use appropriate anchors for concrete/brick walls. Do not install on drywall alone. Secure the wall plate firmly. Use the included magnetic bubble level to ensure proper alignment.
- Hang TV on Arm Assembly: Carefully lift and hang the TV (with attached brackets) onto the arm assembly. Ensure it is securely seated.
- Secure TV to Mount: Engage any safety locks or screws on the mount to prevent accidental dislodgement of the TV.
Installation Visuals:
Official Installation Videos:
4. Operating Instructions
The PERLESMITH Full Motion TV Wall Mount offers various adjustments to achieve your desired viewing angle:
- Tilt Adjustment: The TV bracket allows tilting the TV up 5° and down 15°. This feature helps in reducing glare from lights or windows and optimizing viewing comfort. To adjust, loosen the tilt knobs on the side of the TV plate, set to the desired angle, and re-tighten securely.
- Swivel Adjustment: The dual articulating arms enable a swivel range of +/-45°. This allows you to turn the TV left or right to accommodate different seating positions in the room. Gently push or pull the TV to the desired swivel angle.
- Extension and Retraction: The mount can extend up to 16 inches from the wall, providing flexibility for viewing from various distances or for accessing cables behind the TV. It can also retract to a slim 2.8 inches from the wall for a clean, low-profile appearance when not in use. Gently push or pull the TV to extend or retract the arms.
- Level Adjustment: After installation, the TV can be leveled +/-3° to ensure a perfectly horizontal display. This adjustment is typically made by loosening specific screws on the TV plate, leveling the TV, and then re-tightening.
5. Maintenance
To ensure the longevity and safe operation of your TV wall mount, perform the following maintenance:
- Regular Cleaning: Dust the mount periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
- Check Connections: Annually, or if you notice any movement, check all screws and bolts to ensure they are securely tightened. Pay particular attention to the wall mounting bolts and the screws attaching the TV to the brackets.
- Inspect for Wear: Periodically inspect the articulating arms and joints for any signs of wear, damage, or corrosion. If any issues are found, contact customer support.
6. Troubleshooting
If you encounter issues with your PERLESMITH TV Wall Mount, consider the following common troubleshooting tips:
- TV is not level: Ensure the wall plate is level during installation. Use the built-in level adjustment feature (+/-3°) by loosening the appropriate screws, adjusting, and re-tightening.
- Mount feels loose or unstable: Re-check all mounting bolts and screws, both to the wall and to the TV. Ensure they are tightened to the recommended specifications. Verify that the mount is installed into solid wood studs or appropriate concrete/brick with correct anchors.
- Difficulty with movement (tilt/swivel/extension): Check for any obstructions. Ensure all adjustment knobs or screws are sufficiently loosened before attempting to move the TV, and re-tighten them once the desired position is achieved.
- Missing parts or damaged components: Refer to the "Package Contents" section. If any parts are missing or damaged upon arrival, contact PERLESMITH customer service immediately.
For more complex issues or if troubleshooting steps do not resolve the problem, please refer to the comprehensive user manual (PDF) or contact PERLESMITH customer support.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand | PERLESMITH |
| Model Number | PSLFK1 |
| TV Size Compatibility | 37-82 Inches |
| Maximum Load Capacity | 132 lbs (60 kg) |
| VESA Compatibility | 200x100mm to 600x400mm |
| Tilt Angle | +5° / -15° |
| Swivel Angle | +/-45° |
| Level Adjustment | +/-3° |
| Extension from Wall | 2.8" (retracted) to 16" (extended) |
| Material | Alloy Steel |
| Item Weight | 11.99 pounds |
| Color | Black |
8. Warranty & Support
PERLESMITH is committed to providing high-quality products and excellent customer service.
- Warranty: This product comes with a 5-year warranty. Additionally, protection plans (2-Year and 3-Year) are available for extended coverage. Please refer to your purchase documentation for specific terms and conditions.
- Customer Service: Our US-based customer care team is available 7 days a week to assist with pre-purchase questions, installation inquiries, and any other support needs.
- Contact Information: For support, please visit the official PERLESMITH website or refer to the contact details provided in your product packaging.
