Instruction Manual

1. Introduction

The Makita SK105DZ 12V max CXT Lithium-Ion Cordless Self-Leveling Cross-Line Red Beam Laser is designed for precise leveling, alignment, and plumb applications in various construction and renovation tasks. This tool provides a cordless solution for professionals seeking accuracy and efficiency.

The laser offers a bright 635 nm Class II red laser with high accuracy, making it suitable for diverse working environments. Its self-leveling feature ensures quick setup and increased productivity.

Figure 1: Makita SK105DZ Self-Leveling Cross-Line Red Beam Laser

2. Safety Information

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury.

Laser Safety

This product is a Class 2 laser product. Power Output <1mW.

• DO NOT stare directly into the laser beam.
• DO NOT intentionally direct the laser beam at people or animals.
• DO NOT use optical instruments (e.g., binoculars, telescopes) to view the laser beam.
• Ensure the laser is turned off or in a safe mode when not in use to prevent accidental exposure.
• Keep out of reach of children.

General Safety Precautions

• Always operate the laser level in a stable and secure environment.
• Avoid exposing the tool to water or excessive moisture.
• Use only Makita 12V max CXT Lithium-Ion batteries and chargers.
• Store the tool in a dry, secure place when not in use.

3. Product Features

The Makita SK105DZ laser level boasts several key features designed for professional use:

• Selectable Horizontal/Vertical Cross Reference Lines: Essential for various level, align, and plumb applications.
• 12V max CXT Battery Compatibility: Offers the convenience of a rechargeable tool battery, providing up to 40 hours of continuous run-time (battery not included).
• Extended Red Line Visibility: Range up to 82 feet depending on ambient light, and detectable up to 262 feet with a Makita laser detector (sold separately).
• High Accuracy: Bright 635 Nm Class II red laser with +/-1/8 inch at 33 feet for best-in-class precision.
• Wide Fan Angle Coverage: Laser line fan angle spans past the 180° horizontal line and 160° vertical line positions for full reference line coverage.

Figure 2: 12V max CXT Lithium-Ion Battery System

4. Setup

4.1 Unpacking

Carefully remove the laser level and all included accessories from the packaging. Verify that all components are present:

• Makita SK105DZ Laser Level
• Magnetic L-Adapter (LE00870131)
• Magnetic Red Target Plate (LE00785638)
• Storage Pouch

4.2 Battery Installation

The SK105DZ is a tool-only product and requires a Makita 12V max CXT Lithium-Ion battery (sold separately).

1. Ensure the laser level is turned off.
2. Locate the battery compartment on the tool.
3. Align the battery with the battery slot, ensuring the ribs on the battery align with the grooves in the housing.
4. Slide the battery into place until it clicks securely.
5. To remove, press the battery release button and slide the battery out.

4.3 Mounting the Laser Level

The laser level can be placed on a flat, stable surface or mounted using the Magnetic L-Adapter.

• On a Surface: Place the laser level on a level, vibration-free surface.
• Using L-Adapter: Attach the Magnetic L-Adapter to the bottom of the laser level. The adapter allows for attachment to metallic surfaces or a tripod (tripod not included) via its threaded mount.

Figure 3: Side view of the laser level, showing mounting points.

5. Operation

5.1 Powering On and Self-Leveling

1. Ensure a charged 12V max CXT battery is installed.
2. Slide the power switch to the 'ON' position. The laser will emit a red beam.
3. The tool will automatically self-level within approximately 3 seconds. If the tool is outside its self-leveling range, the laser lines will blink rapidly. Adjust the tool's position until the lines become steady.

5.2 Selecting Laser Modes

The SK105DZ offers different laser line configurations:

• Press the mode button (usually marked with a laser icon) to cycle through the available modes:
  • Horizontal line only
  • Vertical line only
  • Cross-line (horizontal and vertical lines simultaneously)
• Select the mode appropriate for your application.

5.3 Using the Target Plate

The Magnetic Red Target Plate (LE00785638) enhances the visibility of the laser beam, especially in bright conditions or over longer distances. Place the target plate at the desired measurement point to clearly see the laser line.

5.4 Pulse Mode (for Laser Detector)

For outdoor use or when working over very long distances (up to 262 feet), the laser level can be used with a Makita Laser Detector (sold separately). Activate the pulse mode on the laser level (refer to the tool's specific button for this function, often indicated by a pulse icon) to enable detection by the receiver.

6. Maintenance

6.1 Cleaning

• Regularly clean the laser lens and housing with a soft, dry cloth.
• Do not use harsh chemicals or abrasive cleaners, as they may damage the lens or housing.
• Ensure the laser aperture is free from dust and debris for optimal performance.

6.2 Storage

• When not in use, store the laser level in its provided storage pouch to protect it from dust and impact.
• Store the tool in a cool, dry place, away from direct sunlight and extreme temperatures.
• Remove the battery if the tool will not be used for an extended period.

7. Troubleshooting

8. Specifications

9. Warranty and Support

9.1 Warranty Information

The Makita SK105DZ laser level comes with a 3-year limited warranty. This warranty covers defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims.

For full details regarding warranty terms and conditions, please refer to the official Makita warranty statement included with your product or visit the Makita website.

9.2 Customer Support

If you have any questions, require technical assistance, or need to arrange for service, please contact Makita customer support:

• Visit the official Makita website for contact information and service center locations.
• Refer to the contact details provided in the original product packaging.

Figure 4: Makita's commitment to engineering and design.