1. Introduction
Thank you for choosing the CAMBRIDGE Clark Double Reclining Loveseat. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions thoroughly before beginning assembly and retain them for future reference.
Image 1.1: The CAMBRIDGE Clark Double Reclining Loveseat, showcasing its design and brown polyester upholstery.
2. Safety Information
- Always assemble the loveseat on a soft, clean surface to prevent damage.
- Ensure all bolts and screws are securely tightened before use. Periodically check and retighten as necessary.
- Keep children and pets away from the reclining mechanism during operation to prevent injury.
- Do not stand on the loveseat or use it as a step stool.
- Do not exceed the maximum weight limit of 250 pounds per seat.
- Avoid placing hot items directly on the upholstery.
- Use caution when reclining to avoid pinching fingers or clothing.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support immediately.
- Loveseat Base (1)
- Backrests (2)
- Assembly Hardware (bolts, washers, nuts, etc.)
- Instruction Manual (1)
- Warranty Information (1)
4. Setup and Assembly
Assembly is required for this loveseat. It is recommended that two adults perform the assembly.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, soft surface to prevent scratches.
- Attach Backrests: Align the metal brackets on the backrests with the corresponding receivers on the loveseat base. Slide the backrests down firmly until they click into place. Ensure both backrests are securely locked.
- Connect Reclining Mechanisms (if separate): Some models may require connecting a cable or lever for the reclining function. Refer to specific diagrams if included with your hardware.
- Final Check: Once assembled, gently rock the loveseat to ensure stability. Verify that all connections are secure.
Image 4.1: Rear view of the loveseat, illustrating the attachment points for the backrests during assembly.
5. Operating Instructions
The Clark Double Reclining Loveseat features independent reclining mechanisms for each seat.
- To Recline: Locate the reclining lever on the side of the loveseat (typically on the outer arm). Pull the lever firmly to release the footrest and recline the backrest. Lean back gently to achieve your desired reclining position.
- To Return to Upright Position: Push your body forward and use your legs to push the footrest down until it locks into place. The backrest will return to its upright position. Ensure the footrest is fully closed before exiting the loveseat.
Image 5.1: Detail of the reclining lever located on the side of the loveseat arm.
Image 5.2: The loveseat with one seat fully reclined, demonstrating the adjustable settings.
6. Maintenance and Care
- Cleaning Upholstery: The loveseat is upholstered in durable polyester. For general cleaning, vacuum regularly to remove dust and loose particles. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild soap solution and a damp cloth, then blot dry. Test any cleaning solution on an inconspicuous area first.
- Frame Care: Avoid exposing the loveseat to direct sunlight or extreme temperatures, which can cause fading or material degradation.
- Mechanism Care: Periodically check the reclining mechanism for smooth operation. If it becomes stiff, a small amount of silicone-based lubricant can be applied to moving parts (avoiding upholstery).
- Hardware Check: Routinely inspect all bolts and screws to ensure they remain tight. Retighten as needed.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reclining mechanism is stiff or not engaging. | Mechanism may need lubrication or adjustment; obstruction. | Check for obstructions under the loveseat. Apply silicone lubricant to moving parts. Ensure the lever is fully pulled. |
| Loveseat feels unstable or wobbly. | Loose assembly hardware. | Check and tighten all bolts and screws. Ensure backrests are fully engaged. |
| Footrest does not fully close. | Obstruction; mechanism needs adjustment. | Check for objects obstructing the footrest. Apply gentle pressure to close. If issue persists, contact support. |
8. Specifications
Image 8.1: Key dimensions of the Clark Double Reclining Loveseat.
| Feature | Detail |
|---|---|
| Brand | CAMBRIDGE |
| Model | Clark Double Reclining Loveseat |
| Product Dimensions (D x W x H) | 42"D x 65"W x 40"H |
| Item Weight | 195 Pounds |
| Seat Height | 19.5 Inches |
| Weight Limit (per seat) | 250 Pounds |
| Upholstery Fabric Type | Polyester |
| Color | Brown |
| Special Feature | Recliner |
| Assembly Required | Yes |
| Number of Pieces | 1 (Loveseat) |
| UPC | 013964870169 |
9. Warranty Information
The CAMBRIDGE Clark Double Reclining Loveseat comes with a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal household use. It does not cover damage resulting from misuse, abuse, accidents, commercial use, or unauthorized repairs. Please retain your proof of purchase for warranty claims.
For full warranty terms and conditions, please refer to the separate warranty document included with your purchase or contact CAMBRIDGE customer support.
10. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact CAMBRIDGE customer support.
- Website: Visit the CAMBRIDGE Store on Amazon
- Email: Refer to your warranty document for specific contact email.
- Phone: Refer to your warranty document for specific contact phone number.
Please have your model number (Clark Double Reclining Loveseat) and proof of purchase ready when contacting support.
