SONGMICS BCB001A

SONGMICS BCB001A Telescopic Bathroom Shower Shelf User Manual

Model: BCB001A

1. Product Overview

The SONGMICS BCB001A is a versatile telescopic bathroom shower shelf designed for efficient storage in wet environments. It features a tension-mounted system, eliminating the need for drilling, and offers adjustable height and shelf positions to suit various bathroom layouts.

Key Features:

  • Adjustable Height: Extends from 85 cm to 305 cm to fit most floor-to-ceiling or bathtub-to-ceiling spaces.
  • 4 Adjustable Shelves: Triangular shelves made of durable PP plastic, each with a maximum load capacity of 3 kg.
  • Rust-Resistant Construction: Powder-coated steel tubes ensure longevity in humid bathroom conditions.
  • Easy Installation: No drilling or screws required, utilizing a spring-loaded telescopic mechanism.
  • Integrated Hooks: One shelf includes hooks for hanging towels, loofahs, or other accessories.
SONGMICS BCB001A Telescopic Bathroom Shower Shelf installed in a shower corner
Image 1.1: The SONGMICS BCB001A Telescopic Bathroom Shower Shelf installed in a shower corner, showcasing its four shelves and space-saving design.

2. Safety Information

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in product damage or personal injury.

  • Ensure the product is installed on a stable, flat surface (floor and ceiling/bathtub).
  • Do not exceed the maximum load capacity of 3 kg per shelf. Overloading can cause the shelf to collapse.
  • Regularly check the stability of the telescopic pole and shelves. Re-tighten if necessary.
  • Keep small parts away from children during assembly to prevent choking hazards.
  • Avoid placing heavy or fragile items on the top shelves where they could fall and cause injury.
  • Do not hang from or climb on the shelf.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • 1 x Telescopic Pole (multiple sections)
  • 4 x Triangular Shelves (PP plastic)
  • Rubber Rings/Fasteners for shelf adjustment
  • 1 x Instruction Manual

4. Setup and Installation

Follow these steps for proper assembly and installation of your shower shelf. No tools are required.

  1. Measure Height: Determine the desired installation height (between 85 cm and 305 cm) in your shower or bathtub area.
  2. Assemble Pole Sections: Connect the telescopic pole sections. You may omit one rod section if a smaller height is required. Ensure all connections are secure.
  3. Attach Shelves: Slide the rubber rings onto the pole at your desired shelf heights. Then, place the triangular shelves onto these rubber rings. The shelves should rest firmly on the rings.
  4. Position the Pole: Place the assembled pole in the desired corner. The top end of the pole has a spring mechanism.
  5. Tension Installation: Extend the top section of the pole until it firmly clamps between the floor and ceiling (or bathtub and ceiling). Ensure the pole is vertical and stable. The spring mechanism provides the necessary tension.
  6. Final Adjustment: Adjust the height and position of each shelf as needed. Ensure all shelves are level and securely fastened by their rubber rings.
Diagram showing the adjustable height range of the telescopic shower shelf from 85 cm to 305 cm
Image 4.1: The telescopic pole can be adjusted from 85 cm to 305 cm to fit various ceiling heights. The image also illustrates the simple push-and-lock mechanism for extending the pole.
Detailed dimensions of the shower shelf and its components
Image 4.2: This image provides detailed dimensions, showing the triangular shelf side lengths (25 cm and 35 cm) and the overall height adjustment range.
Close-up of shelf adjustment mechanism and pole details
Image 4.3: Close-up views demonstrating how to adjust the shelves using rubber rings, the stability of items on the shelves, and the design of the pole's base.

5. Operating Instructions

Once installed, the SONGMICS BCB001A shower shelf is ready for use. Its design allows for flexible organization of your bathroom essentials.

  • Shelf Adjustment: To reposition a shelf, simply lift it slightly, slide the rubber rings to the new desired height, and then lower the shelf back onto the rings. Ensure the shelf is stable before placing items on it.
  • Using Hooks: One of the shelves is equipped with integrated hooks. Use these hooks to hang items such as washcloths, loofahs, or small brushes for easy access.
  • Drainage: The shelves feature drainage holes to prevent water accumulation, keeping your items dry and clean.
Close-up of a shower shelf with integrated hooks and items
Image 5.1: A close-up of one of the shelves, demonstrating the practical hooks for hanging accessories like a loofah and a towel.
Close-up of shelf drainage holes
Image 5.2: This image highlights the drainage holes on the shelves, designed to prevent water from pooling and to keep stored items dry.

6. Maintenance

Proper maintenance will ensure the longevity and continued functionality of your SONGMICS shower shelf.

  • Cleaning: Clean the shelves and pole regularly with a mild soap and water solution. Avoid abrasive cleaners or scouring pads, which can damage the finish. The PP plastic shelves are easy to wipe clean.
  • Rust Prevention: The steel tubes are powder-coated for rust resistance. However, wipe down any standing water to further prevent corrosion, especially in areas where the coating might be compromised.
  • Stability Check: Periodically check the tension of the pole to ensure it remains securely clamped between the floor and ceiling. Re-adjust if any wobbling is detected.

7. Troubleshooting

If you encounter any issues with your shower shelf, refer to the following common problems and solutions.

  • Problem: The shelf feels unstable or wobbly.
    Solution: Ensure the telescopic pole is fully extended and securely tensioned between the floor and ceiling. Check that the end pieces have a wide cross-section for good stability. Re-adjust the pole's height to increase tension if needed.
  • Problem: Shelves slide down or are not level.
    Solution: Ensure the rubber rings are correctly positioned and firmly holding the shelves. The shelves should rest securely on the rings. Adjust the rings and shelves to the desired height and ensure they are level.
  • Problem: Items fall off the shelves.
    Solution: Do not overload the shelves beyond the 3 kg capacity. Distribute weight evenly. Ensure the shelf is level and stable.

8. Specifications

Model NumberBCB001A
MaterialPowder-coated Alloy Steel Tube, PP Plastic Shelves
Adjustable Height85 cm - 305 cm (33.5 inches - 120 inches)
Shelf DimensionsTriangular, approx. 25 cm x 35 cm (side lengths)
Number of Shelves4
Max. Load Capacity per Shelf3 kg (6.6 lbs)
Product Weight1.6 kg (3.5 lbs)
Installation MethodFreestanding (Tension Mount)
Special FeaturesAdjustable, Expandable, Moisture Resistant

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official SONGMICS website. Specific warranty details are not available in this manual.

You can visit the SONGMICS Store for more products and information.

Related Documents - BCB001A

Preview SONGMICS BCB001 Adjustable Corner Tension Shelf - Assembly Guide
Detailed assembly instructions and parts list for the SONGMICS BCB001 adjustable corner tension shelf unit. Learn how to install your SONGMICS shelf securely.
Preview SONGMICS BCB001 Tension Rod Corner Shelf Installation Guide
This guide provides step-by-step instructions for assembling and installing the SONGMICS BCB001 tension rod corner shelf. Learn how to measure, assemble parts, adjust length, and secure the shelf for stable storage.
Preview SONGMICS 8-Tier Shoe Rack Assembly Instructions
Concise assembly guide for the SONGMICS LSR024/24 8-Tier Shoe Rack, including parts list, step-by-step instructions, and general usage guidelines.
Preview SONGMICS KSC007 Storage Cart Assembly Instructions
Comprehensive assembly guide and safety information for the SONGMICS KSC007 3-tier rolling storage cart. Includes parts list, step-by-step instructions, and load capacity details.
Preview SONGMICS LMR028 8-Tier Shoe Rack Assembly Instructions
This document provides assembly instructions for the SONGMICS LMR028 8-Tier shoe rack. It includes a detailed parts list and step-by-step guidance for constructing the shoe organizer, designed for storing shoes with a maximum static load capacity of 8 kg per shelf. Safety warnings regarding small parts and assembly procedures are also included.
Preview SONGMICS LPC443 Modular Storage Cube Organizer - Assembly Instructions
Detailed assembly instructions and guidelines for the SONGMICS LPC443 modular storage cube organizer. Learn how to safely assemble, use, and maintain your storage unit.