Introduction
Thank you for purchasing the Metabo Bluetooth Speaker 3.0-57019. This manual provides important information regarding the safe operation, setup, and maintenance of your new speaker. Please read this manual thoroughly before using the product and keep it for future reference.
Safety Instructions
- Do not expose the speaker to water or excessive moisture. This product is not waterproof.
- Avoid extreme temperatures. Do not place the speaker near heat sources or in direct sunlight for extended periods.
- Do not attempt to disassemble, repair, or modify the speaker yourself. Refer all servicing to qualified personnel.
- Use only the provided charging cable or a certified equivalent.
- Keep the speaker away from children and pets.
- Do not operate the speaker at excessively high volumes for prolonged periods to prevent hearing damage.
Package Contents
Ensure all items are present in the package:
- 1 x Metabo Bluetooth Speaker
- 1 x Metabo Charging Cable
- 1 x User Manual (this document)
Product Overview
Familiarize yourself with the components of your Metabo Bluetooth Speaker.
Image: Front view of the Metabo Bluetooth Speaker 3.0-57019, showing the speaker grille and control buttons.
The speaker features a robust design suitable for various environments. Key controls are typically located on the top or front panel, including power, volume, and Bluetooth pairing buttons. The charging port is usually located on the side or rear.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided charging cable to the speaker's charging port and the other end to a USB power adapter (not included) or a computer's USB port.
- A charging indicator light will typically illuminate during charging.
- Charging time is approximately 3 hours.
- The indicator light will change or turn off once charging is complete.
2. Powering On/Off
- To power on: Press and hold the Power button for a few seconds until an indicator light illuminates or an audible prompt is heard.
- To power off: Press and hold the Power button again for a few seconds until the indicator light turns off or an audible prompt is heard.
3. Bluetooth Pairing
To connect your speaker to a Bluetooth-enabled device:
- Ensure the speaker is powered on and in pairing mode. The Bluetooth indicator light will usually flash rapidly.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Metabo Bluetooth 3.0-57019" or a similar name from the list of found devices.
- Once paired, the Bluetooth indicator light on the speaker will typically become solid, and an audible confirmation may be heard.
- The transmission distance is approximately 10 meters (33 feet) in an open area.
Operating
Playing Audio
Once paired, audio from your connected device will play through the Metabo speaker. Use your device to control playback (play, pause, skip tracks).
Volume Control
Adjust the volume using the volume controls on your connected device. Some speakers may also have dedicated volume buttons (+ and -) on the unit itself.
At full volume, the speaker provides approximately 4 hours of playback on a single charge.
Maintenance
Cleaning
Wipe the speaker's exterior with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the finish.
Storage
When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to charge the battery periodically to maintain its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Battery is depleted. | Charge the speaker fully. |
| Cannot pair with Bluetooth device. | Speaker is not in pairing mode or too far from the device. | Ensure speaker is in pairing mode (flashing light). Move device closer to speaker (within 10m). Turn Bluetooth off and on again on your device. |
| No sound or low volume. | Volume on speaker or device is too low. Speaker is not properly connected. | Increase volume on both the speaker and your connected device. Re-pair the Bluetooth connection. |
| Sound distortion. | Volume is too high or device is too far. | Reduce volume. Move device closer to the speaker. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Bluetooth 3.0-57019 |
| Model Number | 657019000 |
| Brand | Metabo |
| Speaker Type | Portable Bluetooth Speaker |
| Audio Output Mode | Stereo |
| Speaker Output Power | 2 x 5 Watts (Total 10W) |
| Connectivity Technology | Bluetooth 3.0 Class II (A2DP + AVRCP) |
| Wireless Communication Range | Approximately 10 meters (33 feet) |
| Power Source | Battery Powered (2000 mAh Lithium Battery) |
| Charging Time | Approximately 3 hours |
| Battery Life (Full Volume) | Approximately 4 hours |
| Dimensions (L x W x H) | 210 x 60 x 50 mm (8.27 x 2.36 x 1.97 inches) |
| Weight | 630 grams (1.39 lbs) |
| Control Method | Application (via connected device) |
| Recommended Uses | For smartphone or tablet |
| Compatible Devices | Laptop, Smartphone |
Warranty and Support
This Metabo Bluetooth Speaker comes with a limited warranty. Please refer to the warranty card included in your original packaging for specific terms and conditions. For technical support or service inquiries, please contact your local Metabo dealer or visit the official Metabo website.
Note: Software updates are not guaranteed for this product.