DCSEC HD 1080P 360 Degree Dome Surveillance Camera

1. Product Overview

The DCSEC HD 1080P 360 Degree Dome Surveillance Camera is a versatile security solution designed for both indoor and outdoor use. Featuring a 1.44mm fisheye lens, it provides a comprehensive 360-degree wide-angle view, effectively replacing multiple standard cameras and eliminating blind spots.

This camera supports four video output modes: 1080P AHD, 1080P CVI, 1080P TVI, and CVBS 960H analog, making it compatible with a wide range of DVR systems. Equipped with 15 powerful IR LEDs, it offers clear night vision up to 30 feet. Its durable metal housing and vandal-proof glass cover ensure longevity and protection against environmental elements.

Figure 1: DCSEC HD 1080P 360 Degree Dome Surveillance Camera.

2. What's in the Box

Please check the package contents upon opening to ensure all items are present:

• 1 x DCSEC HD 1080P 360 Degree Dome Surveillance Camera
• 1 x User Manual
• 1 x Screw Bag for mounting
• 1 x Label Sticker

3. Setup and Installation

This camera is designed for ceiling mount installation. Ensure you have a compatible DVR (TVI/CVI/AHD/Traditional Analog DVR) and a 12V DC power supply (not included) before proceeding.

3.1 Cable Connection

Connect the camera to your DVR and power source as illustrated below. The camera uses a BNC connector for video output and a DC connector for power input.

Figure 2: Cable Connection Scheme. Note: Video cable, power adapter, DVR, and monitor are not included.

3.2 Video Mode Adjustment

The camera's default video output mode is CVBS 960H. For high-definition output (1080P) with AHD/CVI/TVI DVRs, you must change the camera's working mode using the OSD button. The OSD button is located on the camera's cable.

To change the mode:

1. Press the middle of the OSD button to access the camera menu.
2. Navigate to VIDEO SETTING.
3. Change HD from CVBS to CVI/TVI/AHD according to your DVR type.
4. Change STANDARD from NTSC to 1080P 30 or 720P 30 according to your DVR type.
5. Select APPLY & REBOOT to save changes and restart the camera. This step is crucial.

Alternatively, you can press and hold the OSD joystick in the UP, DOWN, LEFT, or RIGHT directions for 10 seconds to switch between modes:

• Default/Up: CVBS 960H
• Down: CVI
• Left: AHD
• Right: TVI

Figure 3: OSD Button and Video Mode Selection.

4. Operating Instructions

Once properly installed and configured, the DCSEC 360 Degree Dome Camera provides continuous surveillance. The 1.44mm fisheye lens captures a full 360-degree panoramic view, allowing for comprehensive monitoring of your desired area.

4.1 Day and Night Vision

The camera automatically switches between day and night modes based on ambient light conditions. The 15 IR LEDs activate in low-light environments to provide clear black and white night vision up to 30 feet.

Figure 4: Example of 360-degree wide-angle view in an indoor setting.

Figure 5: Example of the camera's fisheye view capturing an entire office space.

4.2 Live View and Recording

Access the live feed and recorded footage through your connected DVR system. Refer to your DVR's manual for specific instructions on viewing and managing recordings.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your camera.

5.1 Cleaning the Glass Cover

The camera features a scratch-resistant glass cover. Handle it with care.

• Only remove the protective layer from the glass cover after completing the installation to prevent scratches.
• If the glass cover is lightly soiled, gently blow off any dust.
• For heavier dirt, use a clean and soft cloth to wipe the surface. Do not use brushes or brooms, as their bristles can scratch the glass.

5.2 General Care

Regularly inspect the camera and its connections for any signs of wear or damage. Ensure the mounting is secure, especially for outdoor installations.

6. Troubleshooting

If you encounter issues with your DCSEC camera, please refer to the following common solutions:

• No Video/Poor Image Quality: Ensure the camera's video output mode (AHD/CVI/TVI/CVBS) matches your DVR's input type. Adjust the mode using the OSD button as described in Section 3.2.
• Circular Image/Fisheye Effect: This camera is designed with a fisheye lens to provide a 360-degree circular image. This is normal operation. If you prefer a non-circular image, consider a different camera model.
• Night Vision Issues: Check for obstructions near the camera's IR LEDs. Ensure the glass cover is clean, as dirt or condensation can reflect the IR light and impair night vision.
• Condensation/Water Damage (Outdoor Use): While the camera has a metal housing, ensure it is installed under a roof or in a protected area to minimize direct exposure to heavy rain or condensation, which can affect internal components.
• No Power: Verify the 12V DC power supply is correctly connected and functioning. Check all power cable connections.

If problems persist, please contact DCSEC customer support for further assistance.

7. Specifications

Detailed technical specifications for the DCSEC HD 1080P 360 Degree Dome Surveillance Camera:

8. Warranty Information

For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller directly. Warranty coverage typically includes defects in materials and workmanship under normal use.

9. Support

If you require technical assistance, have questions about installation, or need troubleshooting support beyond what is covered in this manual, please contact the manufacturer:

Shenzhen D&C Security Technology Co.,Ltd

For the most up-to-date contact information, please visit the official DCSEC website or refer to your purchase receipt.