Product Overview
This UpBright 12V AC/DC Adapter with a 4-Way Splitter is designed to provide power to multiple compatible security cameras or DVR systems from a single power outlet. It is suitable for various Lorex, Amcrest, Q-See, and Swann models, offering a streamlined power solution for your surveillance setup.
The adapter features a wide input voltage range (100-240VAC) for global use and incorporates safety protections including Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP).
What's Included
- 1 x UpBright 12V AC/DC Power Adapter
- 1 x 4-Way Power Splitter Cable
Image: The UpBright 12V AC/DC Power Adapter, featuring a standard US plug and a barrel connector output cable.
Image: The 4-Way Power Splitter Cable, designed to connect multiple devices to a single power source.
Image: The UpBright 12V AC/DC Power Adapter connected to the 4-Way Power Splitter Cable.
Setup Instructions
Follow these steps to properly set up your UpBright 12V AC/DC Adapter and 4-Way Splitter.
Step 1: Unpacking
Carefully remove the AC/DC adapter and the 4-way splitter cable from their packaging. Inspect both components for any visible damage.
Step 2: Connecting the 4-Way Splitter
Connect the single female barrel connector end of the 4-way splitter cable to the male barrel connector of the 12V AC/DC power adapter. Ensure a secure connection.
Step 3: Connecting to Devices
Connect the four male barrel connectors of the splitter cable to the power input ports of your compatible security cameras or DVR system. Each camera or DVR port should accept a 5.5mm x 2.1mm barrel connector.
Step 4: Power Connection
Plug the AC/DC adapter into a standard 100-240VAC wall outlet. Verify that all connected devices power on correctly.
Compatibility Note
This adapter and splitter are designed for devices requiring 12V DC power with a 5.5mm x 2.1mm barrel connector. Ensure your devices are compatible with these specifications to prevent damage. The total current draw of all connected devices should not exceed the adapter's maximum output current (e.g., 2.5A).
Operating Instructions
Once the setup is complete, the adapter and splitter operate automatically. Simply ensure the adapter is plugged into a live power outlet and all devices are securely connected. The adapter provides continuous 12V DC power to the connected devices.
Maintenance
Proper maintenance ensures the longevity and reliable operation of your power adapter and splitter.
- Cleaning: Disconnect the adapter from the power outlet before cleaning. Use a soft, dry cloth to wipe the adapter and cables. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter and splitter in a cool, dry place away from direct sunlight and moisture. Avoid kinking or bending the cables sharply.
- Inspection: Periodically inspect the cables and connectors for any signs of wear, fraying, or damage. Replace if any damage is observed.
Troubleshooting
If you encounter issues with your UpBright power adapter and splitter, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to devices | Adapter not plugged in; outlet not working; loose connections; incompatible device; faulty adapter/splitter. | Ensure adapter is securely plugged into a working outlet. Check all cable connections. Verify device compatibility. Test with another known working device or outlet. |
| Devices intermittently lose power | Loose connections; power fluctuations; excessive current draw. | Secure all connections. Ensure the total current draw of connected devices does not exceed the adapter's rating. Consider a surge protector for power stability. |
| Adapter feels hot | Normal operation; excessive load; poor ventilation. | A slight warmth is normal. Ensure adequate ventilation around the adapter. Reduce the number of connected devices if overheating persists. Discontinue use if excessively hot. |
| Power lines or interference on camera feed | Electrical interference; ground loop; faulty power supply. | Ensure proper grounding. Try separating power cables from video cables. Test with a different power supply if possible. |
Specifications
| Feature | Specification |
|---|---|
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 12V DC |
| Output Current | Up to 2.5 Amps (2500mA) |
| Wattage | 24 watts |
| Connector Type | Barrel Connector (5.5mm x 2.1mm) |
| Safety Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Product Dimensions | Approximately 4 x 2 x 2 inches |
| Item Weight | 0.81 ounces |
| Certifications | CE, CCC, ROHS, UL (where applicable) |
Warranty and Support Information
UpBright products are designed for reliability and performance. This product typically includes a 30-day refund policy and a 24-month exchange warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or assistance with product usage, please contact UpBright customer service through the retailer's platform or the official UpBright website. Provide your product model number and purchase details for efficient service.
